* [PATCH v11 0/6] enable hi3xxx SoC
@ 2013-11-07 8:41 Haojian Zhuang
[not found] ` <1383813691-31587-1-git-send-email-haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
0 siblings, 1 reply; 17+ messages in thread
From: Haojian Zhuang @ 2013-11-07 8:41 UTC (permalink / raw)
To: arnd-r2nGTMty4D4, linux-lFZ/pmaqli7XmaaqVzeoHQ,
linus.walleij-QSEj5FYQhm4dnm+yROfE0A, olof-nZhT3qVonbNeoWH0uzbU5w,
rob.herring-bsGFqQB8/DxBDgjK7y7TUQ,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
tglx-hfZtesqFncYOwBW4kG4KsQ, mturquette-QSEj5FYQhm4dnm+yROfE0A,
grant.likely-QSEj5FYQhm4dnm+yROfE0A,
khilman-QSEj5FYQhm4dnm+yROfE0A, swarren-3lzwWm7+Weoh9ZMKESR00Q,
shaojie.sun-QSEj5FYQhm4dnm+yROfE0A,
devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: patches-QSEj5FYQhm4dnm+yROfE0A
v11:
1. Add comments on iotable.
2. Use dummy clock in DTS. Remove common clock binding in DTS file. Clock driver will be in another patchset.
v10:
1. Use static IO mapping in Hi3xxx.
2. Totally drop to support of Hi3716.
3. Rename smp-off property to smp-offset.
4. Remove hardcoding in hotplug driver.
v9:
1. Clean code in DTS file according to Olof's comments.
2. Since debug ll patch is going through Russell's tree, remove it
from this patch set.
v8:
1. Drop to support CLK_GATE_SEPERATED_REG in common clock gate driver.
Support this feature in hi3xxx clock driver.
2. Clean unnecessary device node in DTS.
3. Define all clocks in hi3620-clk.dtsi. And all clock nodes are defined
in the clocks node.
4. Fix the clock gate & clock mux for timer.
5. Rename timer0~4 to dual_timer0~4 in DTS file. It's used to make
name clearer.
v7:
1. Add hi3xxx_defconfig.
2. Use reg property in clock node.
3. Drop origin clock divider table.
4. Reuse clock divider register helper.
5. Reuse clock gate register helper.
6. Append CLK_GATE_SEPERATED_REG flag in order to support Hisilicon
Hi3620 SoC.
7. Rebase DEBUG_LL for Hi3xxx.
8. Add more clock node in DTS file.
v6:
1. Remove hisilicon string from properties in clock driver.
2. Replace array by pointer in clock driver. Since only sctrl parent
node exists at this time.
v5:
1. Remove HIWORD clk patches since they're merged into clk git tree.
2. Set hisilicon,clk-reset property of clkgate node is optional.
3. Update on commandline args in DTS file. Remove earlyprintk, mem, nfs.
4. Move gpio-keys out of amba node in DTS file.
v4:
1. Add clk gate with HIWORD mask for Rockchip.
2. Update comments and code of HIWORD flags for mux/divider.
3. Append a mux without HIWORD mask in Hisilicon 3620.
4. Fix the pinmux setting in Hi4511.
v3:
1. Use clk_register_mux_table().
v2:
1. Reuse mux & divider driver. So append CLK_MUX_HIWORD_MASK &
CLK_DIVIDER_HIWORD_MASK for Hi3620 SoC.
2. Fix system timer running too fast because wrong divider is choosen.
3. Remove .init_irq in DT machine descriptor.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 17+ messages in thread[parent not found: <1383813691-31587-1-git-send-email-haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>]
* [PATCH v11 1/6] ARM: hi3xxx: add board support with device tree [not found] ` <1383813691-31587-1-git-send-email-haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> @ 2013-11-07 8:41 ` Haojian Zhuang [not found] ` <1383813691-31587-2-git-send-email-haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> 2013-11-07 8:41 ` [PATCH v11 2/6] ARM: dts: enable hi4511 " Haojian Zhuang ` (4 subsequent siblings) 5 siblings, 1 reply; 17+ messages in thread From: Haojian Zhuang @ 2013-11-07 8:41 UTC (permalink / raw) To: arnd-r2nGTMty4D4, linux-lFZ/pmaqli7XmaaqVzeoHQ, linus.walleij-QSEj5FYQhm4dnm+yROfE0A, olof-nZhT3qVonbNeoWH0uzbU5w, rob.herring-bsGFqQB8/DxBDgjK7y7TUQ, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, tglx-hfZtesqFncYOwBW4kG4KsQ, mturquette-QSEj5FYQhm4dnm+yROfE0A, grant.likely-QSEj5FYQhm4dnm+yROfE0A, khilman-QSEj5FYQhm4dnm+yROfE0A, swarren-3lzwWm7+Weoh9ZMKESR00Q, shaojie.sun-QSEj5FYQhm4dnm+yROfE0A, devicetree-u79uwXL29TY76Z2rM5mHXA Cc: patches-QSEj5FYQhm4dnm+yROfE0A, Haojian Zhuang Add board support with device tree for Hisilicon Hi3620 SoC platform. Changelog: v11: 1. Add comments for iotable. v10: 1. Add .map_io() & debug_ll_io_init() back. Since debug_ll_io_init() is only called if .map_io() isn't assigned. Use .map_io() to setup static IO mapping that is used in clock driver. v3: 1. Remove .map_io() in DT machine descriptor. Since debug_ll_io_init() is called by default. 2. Remove .init_machine() in DT machine descriptor. Since of_platform_populate() is called by default in DT mode. v2: 1. Remove .init_irq() in DT machine descriptor. Since irqchip_init() is called by default in DT mode. Signed-off-by: Haojian Zhuang <haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> --- .../bindings/arm/hisilicon/hisilicon.txt | 10 ++++ arch/arm/Kconfig | 2 + arch/arm/Makefile | 1 + arch/arm/mach-hi3xxx/Kconfig | 12 +++++ arch/arm/mach-hi3xxx/Makefile | 5 ++ arch/arm/mach-hi3xxx/hi3xxx.c | 60 ++++++++++++++++++++++ 6 files changed, 90 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt create mode 100644 arch/arm/mach-hi3xxx/Kconfig create mode 100644 arch/arm/mach-hi3xxx/Makefile create mode 100644 arch/arm/mach-hi3xxx/hi3xxx.c diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt new file mode 100644 index 0000000..3be60c8 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt @@ -0,0 +1,10 @@ +Hisilicon Platforms Device Tree Bindings +---------------------------------------------------- + +Hi3716 Development Board +Required root node properties: + - compatible = "hisilicon,hi3716-dkb"; + +Hi4511 Board +Required root node properties: + - compatible = "hisilicon,hi3620-hi4511"; diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 3f7714d..0118443 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -946,6 +946,8 @@ source "arch/arm/mach-footbridge/Kconfig" source "arch/arm/mach-gemini/Kconfig" +source "arch/arm/mach-hi3xxx/Kconfig" + source "arch/arm/mach-highbank/Kconfig" source "arch/arm/mach-integrator/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index a37a50f..23fb0b0 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -155,6 +155,7 @@ machine-$(CONFIG_ARCH_EBSA110) += ebsa110 machine-$(CONFIG_ARCH_EP93XX) += ep93xx machine-$(CONFIG_ARCH_EXYNOS) += exynos machine-$(CONFIG_ARCH_GEMINI) += gemini +machine-$(CONFIG_ARCH_HI3xxx) += hi3xxx machine-$(CONFIG_ARCH_HIGHBANK) += highbank machine-$(CONFIG_ARCH_INTEGRATOR) += integrator machine-$(CONFIG_ARCH_IOP13XX) += iop13xx diff --git a/arch/arm/mach-hi3xxx/Kconfig b/arch/arm/mach-hi3xxx/Kconfig new file mode 100644 index 0000000..68bd26c --- /dev/null +++ b/arch/arm/mach-hi3xxx/Kconfig @@ -0,0 +1,12 @@ +config ARCH_HI3xxx + bool "Hisilicon Hi36xx/Hi37xx family" if ARCH_MULTI_V7 + select ARM_AMBA + select ARM_GIC + select ARM_TIMER_SP804 + select CACHE_L2X0 + select CLKSRC_OF + select GENERIC_CLOCKEVENTS + select PINCTRL + select PINCTRL_SINGLE + help + Support for Hisilicon Hi36xx/Hi37xx processor family diff --git a/arch/arm/mach-hi3xxx/Makefile b/arch/arm/mach-hi3xxx/Makefile new file mode 100644 index 0000000..d68ebb3 --- /dev/null +++ b/arch/arm/mach-hi3xxx/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for Hisilicon Hi36xx/Hi37xx processors line +# + +obj-y += hi3xxx.o diff --git a/arch/arm/mach-hi3xxx/hi3xxx.c b/arch/arm/mach-hi3xxx/hi3xxx.c new file mode 100644 index 0000000..925af13 --- /dev/null +++ b/arch/arm/mach-hi3xxx/hi3xxx.c @@ -0,0 +1,60 @@ +/* + * (Hisilicon's Hi36xx/Hi37xx SoC based) flattened device tree enabled machine + * + * Copyright (c) 2012-2013 Hisilicon Ltd. + * Copyright (c) 2012-2013 Linaro Ltd. + * + * Author: Haojian Zhuang <haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/clk-provider.h> +#include <linux/clocksource.h> +#include <linux/irqchip.h> +#include <linux/of_platform.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +/* + * This table is only for optimization. Since ioremap() could always share + * the same mapping if it's defined as static IO mapping. + * + * Without this table, system could also work. The cost is some virtual address + * spaces wasted since ioremap() may be called multi times for the same + * IO space. + */ +static struct map_desc hi3620_io_desc[] __initdata = { + { + .pfn = __phys_to_pfn(0xfc802000), + .virtual = 0xfe802000, + .length = 0x1000, + .type = MT_DEVICE, + }, +}; + +static void __init hi3620_map_io(void) +{ + debug_ll_io_init(); + iotable_init(hi3620_io_desc, ARRAY_SIZE(hi3620_io_desc)); +} + +static void __init hi3xxx_timer_init(void) +{ + of_clk_init(NULL); + clocksource_of_init(); +} + +static const char *hi3xxx_compat[] __initdata = { + "hisilicon,hi3620-hi4511", + NULL, +}; + +DT_MACHINE_START(HI3620, "Hisilicon Hi3620 (Flattened Device Tree)") + .map_io = hi3620_map_io, + .init_time = hi3xxx_timer_init, + .dt_compat = hi3xxx_compat, +MACHINE_END -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 17+ messages in thread
[parent not found: <1383813691-31587-2-git-send-email-haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>]
* Re: [PATCH v11 1/6] ARM: hi3xxx: add board support with device tree [not found] ` <1383813691-31587-2-git-send-email-haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> @ 2013-11-07 9:50 ` Dinh Nguyen [not found] ` <527B6266.9020107-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 0 siblings, 1 reply; 17+ messages in thread From: Dinh Nguyen @ 2013-11-07 9:50 UTC (permalink / raw) To: Haojian Zhuang, arnd-r2nGTMty4D4, linux-lFZ/pmaqli7XmaaqVzeoHQ, linus.walleij-QSEj5FYQhm4dnm+yROfE0A, olof-nZhT3qVonbNeoWH0uzbU5w, rob.herring-bsGFqQB8/DxBDgjK7y7TUQ, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, tglx-hfZtesqFncYOwBW4kG4KsQ, mturquette-QSEj5FYQhm4dnm+yROfE0A, grant.likely-QSEj5FYQhm4dnm+yROfE0A, khilman-QSEj5FYQhm4dnm+yROfE0A, swarren-3lzwWm7+Weoh9ZMKESR00Q, shaojie.sun-QSEj5FYQhm4dnm+yROfE0A, devicetree-u79uwXL29TY76Z2rM5mHXA Cc: patches-QSEj5FYQhm4dnm+yROfE0A On 11/7/13 2:41 AM, Haojian Zhuang wrote: > Add board support with device tree for Hisilicon Hi3620 SoC platform. > > Changelog: > v11: > 1. Add comments for iotable. > > v10: > 1. Add .map_io() & debug_ll_io_init() back. Since debug_ll_io_init() is > only called if .map_io() isn't assigned. Use .map_io() to setup static > IO mapping that is used in clock driver. > > v3: > 1. Remove .map_io() in DT machine descriptor. Since debug_ll_io_init() > is called by default. > 2. Remove .init_machine() in DT machine descriptor. Since > of_platform_populate() is called by default in DT mode. > > v2: > 1. Remove .init_irq() in DT machine descriptor. Since irqchip_init() > is called by default in DT mode. > > Signed-off-by: Haojian Zhuang <haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> > --- > .../bindings/arm/hisilicon/hisilicon.txt | 10 ++++ > arch/arm/Kconfig | 2 + > arch/arm/Makefile | 1 + > arch/arm/mach-hi3xxx/Kconfig | 12 +++++ > arch/arm/mach-hi3xxx/Makefile | 5 ++ > arch/arm/mach-hi3xxx/hi3xxx.c | 60 ++++++++++++++++++++++ > 6 files changed, 90 insertions(+) > create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt > create mode 100644 arch/arm/mach-hi3xxx/Kconfig > create mode 100644 arch/arm/mach-hi3xxx/Makefile > create mode 100644 arch/arm/mach-hi3xxx/hi3xxx.c > > diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt > new file mode 100644 > index 0000000..3be60c8 > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt > @@ -0,0 +1,10 @@ > +Hisilicon Platforms Device Tree Bindings > +---------------------------------------------------- > + > +Hi3716 Development Board > +Required root node properties: > + - compatible = "hisilicon,hi3716-dkb"; > + > +Hi4511 Board > +Required root node properties: > + - compatible = "hisilicon,hi3620-hi4511"; > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > index 3f7714d..0118443 100644 > --- a/arch/arm/Kconfig > +++ b/arch/arm/Kconfig > @@ -946,6 +946,8 @@ source "arch/arm/mach-footbridge/Kconfig" > > source "arch/arm/mach-gemini/Kconfig" > > +source "arch/arm/mach-hi3xxx/Kconfig" > + > source "arch/arm/mach-highbank/Kconfig" > > source "arch/arm/mach-integrator/Kconfig" > diff --git a/arch/arm/Makefile b/arch/arm/Makefile > index a37a50f..23fb0b0 100644 > --- a/arch/arm/Makefile > +++ b/arch/arm/Makefile > @@ -155,6 +155,7 @@ machine-$(CONFIG_ARCH_EBSA110) += ebsa110 > machine-$(CONFIG_ARCH_EP93XX) += ep93xx > machine-$(CONFIG_ARCH_EXYNOS) += exynos > machine-$(CONFIG_ARCH_GEMINI) += gemini > +machine-$(CONFIG_ARCH_HI3xxx) += hi3xxx > machine-$(CONFIG_ARCH_HIGHBANK) += highbank > machine-$(CONFIG_ARCH_INTEGRATOR) += integrator > machine-$(CONFIG_ARCH_IOP13XX) += iop13xx > diff --git a/arch/arm/mach-hi3xxx/Kconfig b/arch/arm/mach-hi3xxx/Kconfig > new file mode 100644 > index 0000000..68bd26c > --- /dev/null > +++ b/arch/arm/mach-hi3xxx/Kconfig > @@ -0,0 +1,12 @@ > +config ARCH_HI3xxx > + bool "Hisilicon Hi36xx/Hi37xx family" if ARCH_MULTI_V7 > + select ARM_AMBA > + select ARM_GIC > + select ARM_TIMER_SP804 > + select CACHE_L2X0 > + select CLKSRC_OF I think you need COMMON_CLK here. > + select GENERIC_CLOCKEVENTS > + select PINCTRL > + select PINCTRL_SINGLE > + help > + Support for Hisilicon Hi36xx/Hi37xx processor family > diff --git a/arch/arm/mach-hi3xxx/Makefile b/arch/arm/mach-hi3xxx/Makefile > new file mode 100644 > index 0000000..d68ebb3 > --- /dev/null > +++ b/arch/arm/mach-hi3xxx/Makefile > @@ -0,0 +1,5 @@ > +# > +# Makefile for Hisilicon Hi36xx/Hi37xx processors line > +# > + > +obj-y += hi3xxx.o > diff --git a/arch/arm/mach-hi3xxx/hi3xxx.c b/arch/arm/mach-hi3xxx/hi3xxx.c > new file mode 100644 > index 0000000..925af13 > --- /dev/null > +++ b/arch/arm/mach-hi3xxx/hi3xxx.c > @@ -0,0 +1,60 @@ > +/* > + * (Hisilicon's Hi36xx/Hi37xx SoC based) flattened device tree enabled machine > + * > + * Copyright (c) 2012-2013 Hisilicon Ltd. > + * Copyright (c) 2012-2013 Linaro Ltd. > + * > + * Author: Haojian Zhuang <haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +#include <linux/clk-provider.h> > +#include <linux/clocksource.h> > +#include <linux/irqchip.h> > +#include <linux/of_platform.h> > + > +#include <asm/mach/arch.h> > +#include <asm/mach/map.h> > + > +/* > + * This table is only for optimization. Since ioremap() could always share > + * the same mapping if it's defined as static IO mapping. > + * > + * Without this table, system could also work. The cost is some virtual address > + * spaces wasted since ioremap() may be called multi times for the same > + * IO space. > + */ > +static struct map_desc hi3620_io_desc[] __initdata = { > + { > + .pfn = __phys_to_pfn(0xfc802000), > + .virtual = 0xfe802000, > + .length = 0x1000, > + .type = MT_DEVICE, > + }, > +}; > + > +static void __init hi3620_map_io(void) > +{ > + debug_ll_io_init(); > + iotable_init(hi3620_io_desc, ARRAY_SIZE(hi3620_io_desc)); > +} > + > +static void __init hi3xxx_timer_init(void) > +{ > + of_clk_init(NULL); > + clocksource_of_init(); > +} Once you have COMMON_CLK, then this function can go away. > + > +static const char *hi3xxx_compat[] __initdata = { > + "hisilicon,hi3620-hi4511", > + NULL, > +}; > + > +DT_MACHINE_START(HI3620, "Hisilicon Hi3620 (Flattened Device Tree)") > + .map_io = hi3620_map_io, > + .init_time = hi3xxx_timer_init, .init_time can go away if you have COMMON_CLK. Dinh > + .dt_compat = hi3xxx_compat, > +MACHINE_END -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 17+ messages in thread
[parent not found: <527B6266.9020107-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]
* Re: [PATCH v11 1/6] ARM: hi3xxx: add board support with device tree [not found] ` <527B6266.9020107-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> @ 2013-11-12 8:42 ` Haojian Zhuang 0 siblings, 0 replies; 17+ messages in thread From: Haojian Zhuang @ 2013-11-12 8:42 UTC (permalink / raw) To: Dinh Nguyen Cc: Arnd Bergmann, Russell King - ARM Linux, Linus Walleij, Olof Johansson, Rob Herring, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org, Mike Turquette, Grant Likely, Kevin Hilman, Stephen Warren, Shaojie Sun, devicetree-u79uwXL29TY76Z2rM5mHXA, Patch Tracking On 7 November 2013 17:50, Dinh Nguyen <dinh.linux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote: > > On 11/7/13 2:41 AM, Haojian Zhuang wrote: >> Add board support with device tree for Hisilicon Hi3620 SoC platform. >> >> Changelog: >> v11: >> 1. Add comments for iotable. >> >> v10: >> 1. Add .map_io() & debug_ll_io_init() back. Since debug_ll_io_init() is >> only called if .map_io() isn't assigned. Use .map_io() to setup static >> IO mapping that is used in clock driver. >> >> v3: >> 1. Remove .map_io() in DT machine descriptor. Since debug_ll_io_init() >> is called by default. >> 2. Remove .init_machine() in DT machine descriptor. Since >> of_platform_populate() is called by default in DT mode. >> >> v2: >> 1. Remove .init_irq() in DT machine descriptor. Since irqchip_init() >> is called by default in DT mode. >> >> Signed-off-by: Haojian Zhuang <haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >> --- >> .../bindings/arm/hisilicon/hisilicon.txt | 10 ++++ >> arch/arm/Kconfig | 2 + >> arch/arm/Makefile | 1 + >> arch/arm/mach-hi3xxx/Kconfig | 12 +++++ >> arch/arm/mach-hi3xxx/Makefile | 5 ++ >> arch/arm/mach-hi3xxx/hi3xxx.c | 60 ++++++++++++++++++++++ >> 6 files changed, 90 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt >> create mode 100644 arch/arm/mach-hi3xxx/Kconfig >> create mode 100644 arch/arm/mach-hi3xxx/Makefile >> create mode 100644 arch/arm/mach-hi3xxx/hi3xxx.c >> >> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt >> new file mode 100644 >> index 0000000..3be60c8 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt >> @@ -0,0 +1,10 @@ >> +Hisilicon Platforms Device Tree Bindings >> +---------------------------------------------------- >> + >> +Hi3716 Development Board >> +Required root node properties: >> + - compatible = "hisilicon,hi3716-dkb"; >> + >> +Hi4511 Board >> +Required root node properties: >> + - compatible = "hisilicon,hi3620-hi4511"; >> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig >> index 3f7714d..0118443 100644 >> --- a/arch/arm/Kconfig >> +++ b/arch/arm/Kconfig >> @@ -946,6 +946,8 @@ source "arch/arm/mach-footbridge/Kconfig" >> >> source "arch/arm/mach-gemini/Kconfig" >> >> +source "arch/arm/mach-hi3xxx/Kconfig" >> + >> source "arch/arm/mach-highbank/Kconfig" >> >> source "arch/arm/mach-integrator/Kconfig" >> diff --git a/arch/arm/Makefile b/arch/arm/Makefile >> index a37a50f..23fb0b0 100644 >> --- a/arch/arm/Makefile >> +++ b/arch/arm/Makefile >> @@ -155,6 +155,7 @@ machine-$(CONFIG_ARCH_EBSA110) += ebsa110 >> machine-$(CONFIG_ARCH_EP93XX) += ep93xx >> machine-$(CONFIG_ARCH_EXYNOS) += exynos >> machine-$(CONFIG_ARCH_GEMINI) += gemini >> +machine-$(CONFIG_ARCH_HI3xxx) += hi3xxx >> machine-$(CONFIG_ARCH_HIGHBANK) += highbank >> machine-$(CONFIG_ARCH_INTEGRATOR) += integrator >> machine-$(CONFIG_ARCH_IOP13XX) += iop13xx >> diff --git a/arch/arm/mach-hi3xxx/Kconfig b/arch/arm/mach-hi3xxx/Kconfig >> new file mode 100644 >> index 0000000..68bd26c >> --- /dev/null >> +++ b/arch/arm/mach-hi3xxx/Kconfig >> @@ -0,0 +1,12 @@ >> +config ARCH_HI3xxx >> + bool "Hisilicon Hi36xx/Hi37xx family" if ARCH_MULTI_V7 >> + select ARM_AMBA >> + select ARM_GIC >> + select ARM_TIMER_SP804 >> + select CACHE_L2X0 >> + select CLKSRC_OF > I think you need COMMON_CLK here. Why? COMMON_CLK will be selected if ARCH_MULTIPLATFORM is enabled. Why do I need to choose it again? >> + select GENERIC_CLOCKEVENTS >> + select PINCTRL >> + select PINCTRL_SINGLE >> + help >> + Support for Hisilicon Hi36xx/Hi37xx processor family >> diff --git a/arch/arm/mach-hi3xxx/Makefile b/arch/arm/mach-hi3xxx/Makefile >> new file mode 100644 >> index 0000000..d68ebb3 >> --- /dev/null >> +++ b/arch/arm/mach-hi3xxx/Makefile >> @@ -0,0 +1,5 @@ >> +# >> +# Makefile for Hisilicon Hi36xx/Hi37xx processors line >> +# >> + >> +obj-y += hi3xxx.o >> diff --git a/arch/arm/mach-hi3xxx/hi3xxx.c b/arch/arm/mach-hi3xxx/hi3xxx.c >> new file mode 100644 >> index 0000000..925af13 >> --- /dev/null >> +++ b/arch/arm/mach-hi3xxx/hi3xxx.c >> @@ -0,0 +1,60 @@ >> +/* >> + * (Hisilicon's Hi36xx/Hi37xx SoC based) flattened device tree enabled machine >> + * >> + * Copyright (c) 2012-2013 Hisilicon Ltd. >> + * Copyright (c) 2012-2013 Linaro Ltd. >> + * >> + * Author: Haojian Zhuang <haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> +*/ >> + >> +#include <linux/clk-provider.h> >> +#include <linux/clocksource.h> >> +#include <linux/irqchip.h> >> +#include <linux/of_platform.h> >> + >> +#include <asm/mach/arch.h> >> +#include <asm/mach/map.h> >> + >> +/* >> + * This table is only for optimization. Since ioremap() could always share >> + * the same mapping if it's defined as static IO mapping. >> + * >> + * Without this table, system could also work. The cost is some virtual address >> + * spaces wasted since ioremap() may be called multi times for the same >> + * IO space. >> + */ >> +static struct map_desc hi3620_io_desc[] __initdata = { >> + { >> + .pfn = __phys_to_pfn(0xfc802000), >> + .virtual = 0xfe802000, >> + .length = 0x1000, >> + .type = MT_DEVICE, >> + }, >> +}; >> + >> +static void __init hi3620_map_io(void) >> +{ >> + debug_ll_io_init(); >> + iotable_init(hi3620_io_desc, ARRAY_SIZE(hi3620_io_desc)); >> +} >> + >> +static void __init hi3xxx_timer_init(void) >> +{ >> + of_clk_init(NULL); >> + clocksource_of_init(); >> +} > Once you have COMMON_CLK, then this function can go away. On v3.12-rcx, of_clk_init() must be called by platform driver. Now v3.13-rcx doesn't announce yet. This function will be removed in additional patch, not in this patch. >> + >> +static const char *hi3xxx_compat[] __initdata = { >> + "hisilicon,hi3620-hi4511", >> + NULL, >> +}; >> + >> +DT_MACHINE_START(HI3620, "Hisilicon Hi3620 (Flattened Device Tree)") >> + .map_io = hi3620_map_io, >> + .init_time = hi3xxx_timer_init, > .init_time can go away if you have COMMON_CLK. > > Dinh >> + .dt_compat = hi3xxx_compat, >> +MACHINE_END > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v11 2/6] ARM: dts: enable hi4511 with device tree [not found] ` <1383813691-31587-1-git-send-email-haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> 2013-11-07 8:41 ` [PATCH v11 1/6] ARM: hi3xxx: add board support with device tree Haojian Zhuang @ 2013-11-07 8:41 ` Haojian Zhuang 2013-11-07 8:41 ` [PATCH v11 3/6] ARM: config: enable hi3xxx in multi_v7_defconfig Haojian Zhuang ` (3 subsequent siblings) 5 siblings, 0 replies; 17+ messages in thread From: Haojian Zhuang @ 2013-11-07 8:41 UTC (permalink / raw) To: arnd-r2nGTMty4D4, linux-lFZ/pmaqli7XmaaqVzeoHQ, linus.walleij-QSEj5FYQhm4dnm+yROfE0A, olof-nZhT3qVonbNeoWH0uzbU5w, rob.herring-bsGFqQB8/DxBDgjK7y7TUQ, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, tglx-hfZtesqFncYOwBW4kG4KsQ, mturquette-QSEj5FYQhm4dnm+yROfE0A, grant.likely-QSEj5FYQhm4dnm+yROfE0A, khilman-QSEj5FYQhm4dnm+yROfE0A, swarren-3lzwWm7+Weoh9ZMKESR00Q, shaojie.sun-QSEj5FYQhm4dnm+yROfE0A, devicetree-u79uwXL29TY76Z2rM5mHXA Cc: patches-QSEj5FYQhm4dnm+yROfE0A, Haojian Zhuang Enable Hisilicon Hi4511 development platform with device tree support. Signed-off-by: Haojian Zhuang <haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/hi3620.dtsi | 518 +++++++++++++++++++++++++++++++++ arch/arm/boot/dts/hi4511.dts | 648 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 1167 insertions(+) create mode 100644 arch/arm/boot/dts/hi3620.dtsi create mode 100644 arch/arm/boot/dts/hi4511.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index cc0f1fb..b4ec185 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -64,6 +64,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos5420-smdk5420.dtb \ exynos5440-sd5v1.dtb \ exynos5440-ssdk5440.dtb +dtb-$(CONFIG_ARCH_HI3xxx) += hi4511.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \ ecx-2000.dtb dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi new file mode 100644 index 0000000..b9d8679 --- /dev/null +++ b/arch/arm/boot/dts/hi3620.dtsi @@ -0,0 +1,518 @@ +/* + * Hisilicon Ltd. Hi3620 SoC + * + * Copyright (C) 2012-2013 Hisilicon Ltd. + * Copyright (C) 2012-2013 Linaro Ltd. + * + * Author: Haojian Zhuang <haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +/include/ "skeleton.dtsi" + +/ { + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + }; + + pclk: clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "apb_pclk"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + }; + + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,amba-bus"; + interrupt-parent = <&gic>; + ranges = <0 0xfc000000 0x2000000>; + + L2: l2-cache { + compatible = "arm,pl310-cache"; + reg = <0xfc10000 0x100000>; + interrupts = <0 15 4>; + cache-unified; + cache-level = <2>; + }; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + /* gic dist base, gic cpu base */ + reg = <0x1000 0x1000>, <0x100 0x100>; + }; + + dual_timer0: dual_timer@800000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x800000 0x1000>; + /* timer00 & timer01 */ + interrupts = <0 0 4>, <0 1 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + dual_timer1: dual_timer@801000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x801000 0x1000>; + /* timer10 & timer11 */ + interrupts = <0 2 4>, <0 3 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + dual_timer2: dual_timer@a01000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0xa01000 0x1000>; + /* timer20 & timer21 */ + interrupts = <0 4 4>, <0 5 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + dual_timer3: dual_timer@a02000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0xa02000 0x1000>; + /* timer30 & timer31 */ + interrupts = <0 6 4>, <0 7 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + dual_timer4: dual_timer@a03000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0xa03000 0x1000>; + /* timer40 & timer41 */ + interrupts = <0 96 4>, <0 97 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart0: uart@b00000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb00000 0x1000>; + interrupts = <0 20 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart1: uart@b01000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb01000 0x1000>; + interrupts = <0 21 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart2: uart@b02000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb02000 0x1000>; + interrupts = <0 22 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart3: uart@b03000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb03000 0x1000>; + interrupts = <0 23 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart4: uart@b04000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb04000 0x1000>; + interrupts = <0 24 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpio0: gpio@806000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x806000 0x1000>; + interrupts = <0 64 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 2 0 1 &pmx0 3 0 1 &pmx0 4 0 1 + &pmx0 5 0 1 &pmx0 6 1 1 &pmx0 7 2 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio1: gpio@807000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x807000 0x1000>; + interrupts = <0 65 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 3 1 &pmx0 1 3 1 &pmx0 2 3 1 + &pmx0 3 3 1 &pmx0 4 3 1 &pmx0 5 4 1 + &pmx0 6 5 1 &pmx0 7 6 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio2: gpio@808000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x808000 0x1000>; + interrupts = <0 66 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 7 1 &pmx0 1 8 1 &pmx0 2 9 1 + &pmx0 3 10 1 &pmx0 4 3 1 &pmx0 5 3 1 + &pmx0 6 3 1 &pmx0 7 3 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio3: gpio@809000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x809000 0x1000>; + interrupts = <0 67 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 3 1 &pmx0 1 3 1 &pmx0 2 3 1 + &pmx0 3 3 1 &pmx0 4 11 1 &pmx0 5 11 1 + &pmx0 6 11 1 &pmx0 7 11 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio4: gpio@80a000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x80a000 0x1000>; + interrupts = <0 68 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 11 1 &pmx0 1 11 1 &pmx0 2 11 1 + &pmx0 3 11 1 &pmx0 4 12 1 &pmx0 5 12 1 + &pmx0 6 13 1 &pmx0 7 13 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio5: gpio@80b000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x80b000 0x1000>; + interrupts = <0 69 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 14 1 &pmx0 1 15 1 &pmx0 2 16 1 + &pmx0 3 16 1 &pmx0 4 16 1 &pmx0 5 16 1 + &pmx0 6 16 1 &pmx0 7 16 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio6: gpio@80c000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x80c000 0x1000>; + interrupts = <0 70 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 16 1 &pmx0 1 16 1 &pmx0 2 17 1 + &pmx0 3 17 1 &pmx0 4 18 1 &pmx0 5 18 1 + &pmx0 6 18 1 &pmx0 7 19 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio7: gpio@80d000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x80d000 0x1000>; + interrupts = <0 71 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 19 1 &pmx0 1 20 1 &pmx0 2 21 1 + &pmx0 3 22 1 &pmx0 4 23 1 &pmx0 5 24 1 + &pmx0 6 25 1 &pmx0 7 26 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio8: gpio@80e000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x80e000 0x1000>; + interrupts = <0 72 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 27 1 &pmx0 1 28 1 &pmx0 2 29 1 + &pmx0 3 30 1 &pmx0 4 31 1 &pmx0 5 32 1 + &pmx0 6 33 1 &pmx0 7 34 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio9: gpio@80f000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x80f000 0x1000>; + interrupts = <0 73 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 35 1 &pmx0 1 36 1 &pmx0 2 37 1 + &pmx0 3 38 1 &pmx0 4 39 1 &pmx0 5 40 1 + &pmx0 6 41 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio10: gpio@810000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x810000 0x1000>; + interrupts = <0 74 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 2 43 1 &pmx0 3 44 1 &pmx0 4 45 1 + &pmx0 5 45 1 &pmx0 6 46 1 &pmx0 7 46 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio11: gpio@811000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x811000 0x1000>; + interrupts = <0 75 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 47 1 &pmx0 1 47 1 &pmx0 2 47 1 + &pmx0 3 47 1 &pmx0 4 47 1 &pmx0 5 48 1 + &pmx0 6 49 1 &pmx0 7 49 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio12: gpio@812000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x812000 0x1000>; + interrupts = <0 76 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 49 1 &pmx0 1 50 1 &pmx0 2 49 1 + &pmx0 3 49 1 &pmx0 4 51 1 &pmx0 5 51 1 + &pmx0 6 51 1 &pmx0 7 52 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio13: gpio@813000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x813000 0x1000>; + interrupts = <0 77 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 51 1 &pmx0 1 51 1 &pmx0 2 53 1 + &pmx0 3 53 1 &pmx0 4 53 1 &pmx0 5 54 1 + &pmx0 6 55 1 &pmx0 7 56 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio14: gpio@814000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x814000 0x1000>; + interrupts = <0 78 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 57 1 &pmx0 1 97 1 &pmx0 2 97 1 + &pmx0 3 58 1 &pmx0 4 59 1 &pmx0 5 60 1 + &pmx0 6 60 1 &pmx0 7 61 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio15: gpio@815000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x815000 0x1000>; + interrupts = <0 79 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 61 1 &pmx0 1 62 1 &pmx0 2 62 1 + &pmx0 3 63 1 &pmx0 4 63 1 &pmx0 5 64 1 + &pmx0 6 64 1 &pmx0 7 65 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio16: gpio@816000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x816000 0x1000>; + interrupts = <0 80 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 66 1 &pmx0 1 67 1 &pmx0 2 68 1 + &pmx0 3 69 1 &pmx0 4 70 1 &pmx0 5 71 1 + &pmx0 6 72 1 &pmx0 7 73 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio17: gpio@817000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x817000 0x1000>; + interrupts = <0 81 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 74 1 &pmx0 1 75 1 &pmx0 2 76 1 + &pmx0 3 77 1 &pmx0 4 78 1 &pmx0 5 79 1 + &pmx0 6 80 1 &pmx0 7 81 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio18: gpio@818000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x818000 0x1000>; + interrupts = <0 82 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 82 1 &pmx0 1 83 1 &pmx0 2 83 1 + &pmx0 3 84 1 &pmx0 4 84 1 &pmx0 5 85 1 + &pmx0 6 86 1 &pmx0 7 87 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio19: gpio@819000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x819000 0x1000>; + interrupts = <0 83 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 87 1 &pmx0 1 87 1 &pmx0 2 88 1 + &pmx0 3 88 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio20: gpio@81a000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x81a000 0x1000>; + interrupts = <0 84 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 0 89 1 &pmx0 1 89 1 &pmx0 2 90 1 + &pmx0 3 90 1 &pmx0 4 91 1 &pmx0 5 92 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + gpio21: gpio@81b000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x81b000 0x1000>; + interrupts = <0 85 0x4>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = < &pmx0 3 94 1 &pmx0 7 96 1>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; + + pmx0: pinmux@803000 { + compatible = "pinctrl-single"; + reg = <0x803000 0x188>; + #address-cells = <1>; + #size-cells = <1>; + #gpio-range-cells = <3>; + ranges; + + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <7>; + /* pin base, nr pins & gpio function */ + pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1 + &range 12 1 0 &range 13 29 1 + &range 43 1 0 &range 44 49 1 + &range 94 1 1 &range 96 2 1>; + + range: gpio-range { + #pinctrl-single,gpio-range-cells = <3>; + }; + }; + + pmx1: pinmux@803800 { + compatible = "pinconf-single"; + reg = <0x803800 0x2dc>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pinctrl-single,register-width = <32>; + }; + }; +}; diff --git a/arch/arm/boot/dts/hi4511.dts b/arch/arm/boot/dts/hi4511.dts new file mode 100644 index 0000000..96e69ab --- /dev/null +++ b/arch/arm/boot/dts/hi4511.dts @@ -0,0 +1,648 @@ +/* + * Copyright (C) 2012-2013 Linaro Ltd. + * Author: Haojian Zhuang <haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +/dts-v1/; +/include/ "hi3620.dtsi" + +/ { + model = "Hisilicon Hi4511 Development Board"; + compatible = "hisilicon,hi3620-hi4511"; + + chosen { + bootargs = "console=ttyAMA0,115200 root=/dev/ram0 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x40000000 0x20000000>; + }; + + amba { + dual_timer0: dual_timer@800000 { + status = "ok"; + }; + + uart0: uart@b00000 { /* console */ + pinctrl-names = "default", "idle"; + pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>; + pinctrl-1 = <&uart0_pmx_idle &uart0_cfg_idle>; + status = "ok"; + }; + + uart1: uart@b01000 { /* modem */ + pinctrl-names = "default", "idle"; + pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>; + pinctrl-1 = <&uart1_pmx_idle &uart1_cfg_idle>; + status = "ok"; + }; + + uart2: uart@b02000 { /* audience */ + pinctrl-names = "default", "idle"; + pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>; + pinctrl-1 = <&uart2_pmx_idle &uart2_cfg_idle>; + status = "ok"; + }; + + uart3: uart@b03000 { + pinctrl-names = "default", "idle"; + pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>; + pinctrl-1 = <&uart3_pmx_idle &uart3_cfg_idle>; + status = "ok"; + }; + + uart4: uart@b04000 { + pinctrl-names = "default", "idle"; + pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>; + pinctrl-1 = <&uart4_pmx_idle &uart4_cfg_func>; + status = "ok"; + }; + + pmx0: pinmux@803000 { + pinctrl-names = "default"; + pinctrl-0 = <&board_pmx_pins>; + + board_pmx_pins: board_pmx_pins { + pinctrl-single,pins = < + 0x008 0x0 /* GPIO -- eFUSE_DOUT */ + 0x100 0x0 /* USIM_CLK & USIM_DATA (IOMG63) */ + >; + }; + uart0_pmx_func: uart0_pmx_func { + pinctrl-single,pins = < + 0x0f0 0x0 + 0x0f4 0x0 /* UART0_RX & UART0_TX */ + >; + }; + uart0_pmx_idle: uart0_pmx_idle { + pinctrl-single,pins = < + /*0x0f0 0x1*/ /* UART0_CTS & UART0_RTS */ + 0x0f4 0x1 /* UART0_RX & UART0_TX */ + >; + }; + uart1_pmx_func: uart1_pmx_func { + pinctrl-single,pins = < + 0x0f8 0x0 /* UART1_CTS & UART1_RTS (IOMG61) */ + 0x0fc 0x0 /* UART1_RX & UART1_TX (IOMG62) */ + >; + }; + uart1_pmx_idle: uart1_pmx_idle { + pinctrl-single,pins = < + 0x0f8 0x1 /* GPIO (IOMG61) */ + 0x0fc 0x1 /* GPIO (IOMG62) */ + >; + }; + uart2_pmx_func: uart2_pmx_func { + pinctrl-single,pins = < + 0x104 0x2 /* UART2_RXD (IOMG96) */ + 0x108 0x2 /* UART2_TXD (IOMG64) */ + >; + }; + uart2_pmx_idle: uart2_pmx_idle { + pinctrl-single,pins = < + 0x104 0x1 /* GPIO (IOMG96) */ + 0x108 0x1 /* GPIO (IOMG64) */ + >; + }; + uart3_pmx_func: uart3_pmx_func { + pinctrl-single,pins = < + 0x160 0x2 /* UART3_CTS & UART3_RTS (IOMG85) */ + 0x164 0x2 /* UART3_RXD & UART3_TXD (IOMG86) */ + >; + }; + uart3_pmx_idle: uart3_pmx_idle { + pinctrl-single,pins = < + 0x160 0x1 /* GPIO (IOMG85) */ + 0x164 0x1 /* GPIO (IOMG86) */ + >; + }; + uart4_pmx_func: uart4_pmx_func { + pinctrl-single,pins = < + 0x168 0x0 /* UART4_CTS & UART4_RTS (IOMG87) */ + 0x16c 0x0 /* UART4_RXD (IOMG88) */ + 0x170 0x0 /* UART4_TXD (IOMG93) */ + >; + }; + uart4_pmx_idle: uart4_pmx_idle { + pinctrl-single,pins = < + 0x168 0x1 /* GPIO (IOMG87) */ + 0x16c 0x1 /* GPIO (IOMG88) */ + 0x170 0x1 /* GPIO (IOMG93) */ + >; + }; + i2c0_pmx_func: i2c0_pmx_func { + pinctrl-single,pins = < + 0x0b4 0x0 /* I2C0_SCL & I2C0_SDA (IOMG45) */ + >; + }; + i2c0_pmx_idle: i2c0_pmx_idle { + pinctrl-single,pins = < + 0x0b4 0x1 /* GPIO (IOMG45) */ + >; + }; + i2c1_pmx_func: i2c1_pmx_func { + pinctrl-single,pins = < + 0x0b8 0x0 /* I2C1_SCL & I2C1_SDA (IOMG46) */ + >; + }; + i2c1_pmx_idle: i2c1_pmx_idle { + pinctrl-single,pins = < + 0x0b8 0x1 /* GPIO (IOMG46) */ + >; + }; + i2c2_pmx_func: i2c2_pmx_func { + pinctrl-single,pins = < + 0x068 0x0 /* I2C2_SCL (IOMG26) */ + 0x06c 0x0 /* I2C2_SDA (IOMG27) */ + >; + }; + i2c2_pmx_idle: i2c2_pmx_idle { + pinctrl-single,pins = < + 0x068 0x1 /* GPIO (IOMG26) */ + 0x06c 0x1 /* GPIO (IOMG27) */ + >; + }; + i2c3_pmx_func: i2c3_pmx_func { + pinctrl-single,pins = < + 0x050 0x2 /* I2C3_SCL (IOMG20) */ + 0x054 0x2 /* I2C3_SDA (IOMG21) */ + >; + }; + i2c3_pmx_idle: i2c3_pmx_idle { + pinctrl-single,pins = < + 0x050 0x1 /* GPIO (IOMG20) */ + 0x054 0x1 /* GPIO (IOMG21) */ + >; + }; + spi0_pmx_func: spi0_pmx_func { + pinctrl-single,pins = < + 0x0d4 0x0 /* SPI0_CLK/SPI0_DI/SPI0_DO (IOMG53) */ + 0x0d8 0x0 /* SPI0_CS0 (IOMG54) */ + 0x0dc 0x0 /* SPI0_CS1 (IOMG55) */ + 0x0e0 0x0 /* SPI0_CS2 (IOMG56) */ + 0x0e4 0x0 /* SPI0_CS3 (IOMG57) */ + >; + }; + spi0_pmx_idle: spi0_pmx_idle { + pinctrl-single,pins = < + 0x0d4 0x1 /* GPIO (IOMG53) */ + 0x0d8 0x1 /* GPIO (IOMG54) */ + 0x0dc 0x1 /* GPIO (IOMG55) */ + 0x0e0 0x1 /* GPIO (IOMG56) */ + 0x0e4 0x1 /* GPIO (IOMG57) */ + >; + }; + spi1_pmx_func: spi1_pmx_func { + pinctrl-single,pins = < + 0x184 0x0 /* SPI1_CLK/SPI1_DI (IOMG98) */ + 0x0e8 0x0 /* SPI1_DO (IOMG58) */ + 0x0ec 0x0 /* SPI1_CS (IOMG95) */ + >; + }; + spi1_pmx_idle: spi1_pmx_idle { + pinctrl-single,pins = < + 0x184 0x1 /* GPIO (IOMG98) */ + 0x0e8 0x1 /* GPIO (IOMG58) */ + 0x0ec 0x1 /* GPIO (IOMG95) */ + >; + }; + kpc_pmx_func: kpc_pmx_func { + pinctrl-single,pins = < + 0x12c 0x0 /* KEY_IN0 (IOMG73) */ + 0x130 0x0 /* KEY_IN1 (IOMG74) */ + 0x134 0x0 /* KEY_IN2 (IOMG75) */ + 0x10c 0x0 /* KEY_OUT0 (IOMG65) */ + 0x110 0x0 /* KEY_OUT1 (IOMG66) */ + 0x114 0x0 /* KEY_OUT2 (IOMG67) */ + >; + }; + kpc_pmx_idle: kpc_pmx_idle { + pinctrl-single,pins = < + 0x12c 0x1 /* GPIO (IOMG73) */ + 0x130 0x1 /* GPIO (IOMG74) */ + 0x134 0x1 /* GPIO (IOMG75) */ + 0x10c 0x1 /* GPIO (IOMG65) */ + 0x110 0x1 /* GPIO (IOMG66) */ + 0x114 0x1 /* GPIO (IOMG67) */ + >; + }; + gpio_key_func: gpio_key_func { + pinctrl-single,pins = < + 0x10c 0x1 /* KEY_OUT0/GPIO (IOMG65) */ + 0x130 0x1 /* KEY_IN1/GPIO (IOMG74) */ + >; + }; + emmc_pmx_func: emmc_pmx_func { + pinctrl-single,pins = < + 0x030 0x2 /* eMMC_CMD/eMMC_CLK (IOMG12) */ + 0x018 0x0 /* NAND_CS3_N (IOMG6) */ + 0x024 0x0 /* NAND_BUSY2_N (IOMG8) */ + 0x028 0x0 /* NAND_BUSY3_N (IOMG9) */ + 0x02c 0x2 /* eMMC_DATA[0:7] (IOMG10) */ + >; + }; + emmc_pmx_idle: emmc_pmx_idle { + pinctrl-single,pins = < + 0x030 0x0 /* GPIO (IOMG12) */ + 0x018 0x1 /* GPIO (IOMG6) */ + 0x024 0x1 /* GPIO (IOMG8) */ + 0x028 0x1 /* GPIO (IOMG9) */ + 0x02c 0x1 /* GPIO (IOMG10) */ + >; + }; + sd_pmx_func: sd_pmx_func { + pinctrl-single,pins = < + 0x0bc 0x0 /* SD_CLK/SD_CMD/SD_DATA0/SD_DATA1/SD_DATA2 (IOMG47) */ + 0x0c0 0x0 /* SD_DATA3 (IOMG48) */ + >; + }; + sd_pmx_idle: sd_pmx_idle { + pinctrl-single,pins = < + 0x0bc 0x1 /* GPIO (IOMG47) */ + 0x0c0 0x1 /* GPIO (IOMG48) */ + >; + }; + nand_pmx_func: nand_pmx_func { + pinctrl-single,pins = < + 0x00c 0x0 /* NAND_ALE/NAND_CLE/.../NAND_DATA[0:7] (IOMG3) */ + 0x010 0x0 /* NAND_CS1_N (IOMG4) */ + 0x014 0x0 /* NAND_CS2_N (IOMG5) */ + 0x018 0x0 /* NAND_CS3_N (IOMG6) */ + 0x01c 0x0 /* NAND_BUSY0_N (IOMG94) */ + 0x020 0x0 /* NAND_BUSY1_N (IOMG7) */ + 0x024 0x0 /* NAND_BUSY2_N (IOMG8) */ + 0x028 0x0 /* NAND_BUSY3_N (IOMG9) */ + 0x02c 0x0 /* NAND_DATA[8:15] (IOMG10) */ + >; + }; + nand_pmx_idle: nand_pmx_idle { + pinctrl-single,pins = < + 0x00c 0x1 /* GPIO (IOMG3) */ + 0x010 0x1 /* GPIO (IOMG4) */ + 0x014 0x1 /* GPIO (IOMG5) */ + 0x018 0x1 /* GPIO (IOMG6) */ + 0x01c 0x1 /* GPIO (IOMG94) */ + 0x020 0x1 /* GPIO (IOMG7) */ + 0x024 0x1 /* GPIO (IOMG8) */ + 0x028 0x1 /* GPIO (IOMG9) */ + 0x02c 0x1 /* GPIO (IOMG10) */ + >; + }; + sdio_pmx_func: sdio_pmx_func { + pinctrl-single,pins = < + 0x0c4 0x0 /* SDIO_CLK/SDIO_CMD/SDIO_DATA[0:3] (IOMG49) */ + >; + }; + sdio_pmx_idle: sdio_pmx_idle { + pinctrl-single,pins = < + 0x0c4 0x1 /* GPIO (IOMG49) */ + >; + }; + audio_out_pmx_func: audio_out_pmx_func { + pinctrl-single,pins = < + 0x0f0 0x1 /* GPIO (IOMG59), audio spk & earphone */ + >; + }; + }; + + pmx1: pinmux@803800 { + pinctrl-names = "default"; + pinctrl-0 = < &board_pu_pins &board_pd_pins &board_pd_ps_pins + &board_np_pins &board_ps_pins &kpc_cfg_func + &audio_out_cfg_func>; + board_pu_pins: board_pu_pins { + pinctrl-single,pins = < + 0x014 0 /* GPIO_158 (IOCFG2) */ + 0x018 0 /* GPIO_159 (IOCFG3) */ + 0x01c 0 /* BOOT_MODE0 (IOCFG4) */ + 0x020 0 /* BOOT_MODE1 (IOCFG5) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <1 1 0 1>; + }; + board_pd_pins: board_pd_pins { + pinctrl-single,pins = < + 0x038 0 /* eFUSE_DOUT (IOCFG11) */ + 0x150 0 /* ISP_GPIO8 (IOCFG93) */ + 0x154 0 /* ISP_GPIO9 (IOCFG94) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + board_pd_ps_pins: board_pd_ps_pins { + pinctrl-single,pins = < + 0x2d8 0 /* CLK_OUT0 (IOCFG190) */ + 0x004 0 /* PMU_SPI_DATA (IOCFG192) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + board_np_pins: board_np_pins { + pinctrl-single,pins = < + 0x24c 0 /* KEYPAD_OUT7 (IOCFG155) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + board_ps_pins: board_ps_pins { + pinctrl-single,pins = < + 0x000 0 /* PMU_SPI_CLK (IOCFG191) */ + 0x008 0 /* PMU_SPI_CS_N (IOCFG193) */ + >; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + uart0_cfg_func: uart0_cfg_func { + pinctrl-single,pins = < + 0x208 0 /* UART0_RXD (IOCFG138) */ + 0x20c 0 /* UART0_TXD (IOCFG139) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + uart0_cfg_idle: uart0_cfg_idle { + pinctrl-single,pins = < + 0x208 0 /* UART0_RXD (IOCFG138) */ + 0x20c 0 /* UART0_TXD (IOCFG139) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + uart1_cfg_func: uart1_cfg_func { + pinctrl-single,pins = < + 0x210 0 /* UART1_CTS (IOCFG140) */ + 0x214 0 /* UART1_RTS (IOCFG141) */ + 0x218 0 /* UART1_RXD (IOCFG142) */ + 0x21c 0 /* UART1_TXD (IOCFG143) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + uart1_cfg_idle: uart1_cfg_idle { + pinctrl-single,pins = < + 0x210 0 /* UART1_CTS (IOCFG140) */ + 0x214 0 /* UART1_RTS (IOCFG141) */ + 0x218 0 /* UART1_RXD (IOCFG142) */ + 0x21c 0 /* UART1_TXD (IOCFG143) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + uart2_cfg_func: uart2_cfg_func { + pinctrl-single,pins = < + 0x220 0 /* UART2_CTS (IOCFG144) */ + 0x224 0 /* UART2_RTS (IOCFG145) */ + 0x228 0 /* UART2_RXD (IOCFG146) */ + 0x22c 0 /* UART2_TXD (IOCFG147) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + uart2_cfg_idle: uart2_cfg_idle { + pinctrl-single,pins = < + 0x220 0 /* GPIO (IOCFG144) */ + 0x224 0 /* GPIO (IOCFG145) */ + 0x228 0 /* GPIO (IOCFG146) */ + 0x22c 0 /* GPIO (IOCFG147) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + uart3_cfg_func: uart3_cfg_func { + pinctrl-single,pins = < + 0x294 0 /* UART3_CTS (IOCFG173) */ + 0x298 0 /* UART3_RTS (IOCFG174) */ + 0x29c 0 /* UART3_RXD (IOCFG175) */ + 0x2a0 0 /* UART3_TXD (IOCFG176) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + uart3_cfg_idle: uart3_cfg_idle { + pinctrl-single,pins = < + 0x294 0 /* UART3_CTS (IOCFG173) */ + 0x298 0 /* UART3_RTS (IOCFG174) */ + 0x29c 0 /* UART3_RXD (IOCFG175) */ + 0x2a0 0 /* UART3_TXD (IOCFG176) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + uart4_cfg_func: uart4_cfg_func { + pinctrl-single,pins = < + 0x2a4 0 /* UART4_CTS (IOCFG177) */ + 0x2a8 0 /* UART4_RTS (IOCFG178) */ + 0x2ac 0 /* UART4_RXD (IOCFG179) */ + 0x2b0 0 /* UART4_TXD (IOCFG180) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + i2c0_cfg_func: i2c0_cfg_func { + pinctrl-single,pins = < + 0x17c 0 /* I2C0_SCL (IOCFG103) */ + 0x180 0 /* I2C0_SDA (IOCFG104) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + i2c1_cfg_func: i2c1_cfg_func { + pinctrl-single,pins = < + 0x184 0 /* I2C1_SCL (IOCFG105) */ + 0x188 0 /* I2C1_SDA (IOCFG106) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + i2c2_cfg_func: i2c2_cfg_func { + pinctrl-single,pins = < + 0x118 0 /* I2C2_SCL (IOCFG79) */ + 0x11c 0 /* I2C2_SDA (IOCFG80) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + i2c3_cfg_func: i2c3_cfg_func { + pinctrl-single,pins = < + 0x100 0 /* I2C3_SCL (IOCFG73) */ + 0x104 0 /* I2C3_SDA (IOCFG74) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + spi0_cfg_func1: spi0_cfg_func1 { + pinctrl-single,pins = < + 0x1d4 0 /* SPI0_CLK (IOCFG125) */ + 0x1d8 0 /* SPI0_DI (IOCFG126) */ + 0x1dc 0 /* SPI0_DO (IOCFG127) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + spi0_cfg_func2: spi0_cfg_func2 { + pinctrl-single,pins = < + 0x1e0 0 /* SPI0_CS0 (IOCFG128) */ + 0x1e4 0 /* SPI0_CS1 (IOCFG129) */ + 0x1e8 0 /* SPI0_CS2 (IOCFG130 */ + 0x1ec 0 /* SPI0_CS3 (IOCFG131) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <1 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + spi1_cfg_func1: spi1_cfg_func1 { + pinctrl-single,pins = < + 0x1f0 0 /* SPI1_CLK (IOCFG132) */ + 0x1f4 0 /* SPI1_DI (IOCFG133) */ + 0x1f8 0 /* SPI1_DO (IOCFG134) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + spi1_cfg_func2: spi1_cfg_func2 { + pinctrl-single,pins = < + 0x1fc 0 /* SPI1_CS (IOCFG135) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <1 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + kpc_cfg_func: kpc_cfg_func { + pinctrl-single,pins = < + 0x250 0 /* KEY_IN0 (IOCFG156) */ + 0x254 0 /* KEY_IN1 (IOCFG157) */ + 0x258 0 /* KEY_IN2 (IOCFG158) */ + 0x230 0 /* KEY_OUT0 (IOCFG148) */ + 0x234 0 /* KEY_OUT1 (IOCFG149) */ + 0x238 0 /* KEY_OUT2 (IOCFG150) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + emmc_cfg_func: emmc_cfg_func { + pinctrl-single,pins = < + 0x0ac 0 /* eMMC_CMD (IOCFG40) */ + 0x0b0 0 /* eMMC_CLK (IOCFG41) */ + 0x058 0 /* NAND_CS3_N (IOCFG19) */ + 0x064 0 /* NAND_BUSY2_N (IOCFG22) */ + 0x068 0 /* NAND_BUSY3_N (IOCFG23) */ + 0x08c 0 /* NAND_DATA8 (IOCFG32) */ + 0x090 0 /* NAND_DATA9 (IOCFG33) */ + 0x094 0 /* NAND_DATA10 (IOCFG34) */ + 0x098 0 /* NAND_DATA11 (IOCFG35) */ + 0x09c 0 /* NAND_DATA12 (IOCFG36) */ + 0x0a0 0 /* NAND_DATA13 (IOCFG37) */ + 0x0a4 0 /* NAND_DATA14 (IOCFG38) */ + 0x0a8 0 /* NAND_DATA15 (IOCFG39) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <1 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + sd_cfg_func1: sd_cfg_func1 { + pinctrl-single,pins = < + 0x18c 0 /* SD_CLK (IOCFG107) */ + 0x190 0 /* SD_CMD (IOCFG108) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + sd_cfg_func2: sd_cfg_func2 { + pinctrl-single,pins = < + 0x194 0 /* SD_DATA0 (IOCFG109) */ + 0x198 0 /* SD_DATA1 (IOCFG110) */ + 0x19c 0 /* SD_DATA2 (IOCFG111) */ + 0x1a0 0 /* SD_DATA3 (IOCFG112) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x70 0xf0>; + }; + nand_cfg_func1: nand_cfg_func1 { + pinctrl-single,pins = < + 0x03c 0 /* NAND_ALE (IOCFG12) */ + 0x040 0 /* NAND_CLE (IOCFG13) */ + 0x06c 0 /* NAND_DATA0 (IOCFG24) */ + 0x070 0 /* NAND_DATA1 (IOCFG25) */ + 0x074 0 /* NAND_DATA2 (IOCFG26) */ + 0x078 0 /* NAND_DATA3 (IOCFG27) */ + 0x07c 0 /* NAND_DATA4 (IOCFG28) */ + 0x080 0 /* NAND_DATA5 (IOCFG29) */ + 0x084 0 /* NAND_DATA6 (IOCFG30) */ + 0x088 0 /* NAND_DATA7 (IOCFG31) */ + 0x08c 0 /* NAND_DATA8 (IOCFG32) */ + 0x090 0 /* NAND_DATA9 (IOCFG33) */ + 0x094 0 /* NAND_DATA10 (IOCFG34) */ + 0x098 0 /* NAND_DATA11 (IOCFG35) */ + 0x09c 0 /* NAND_DATA12 (IOCFG36) */ + 0x0a0 0 /* NAND_DATA13 (IOCFG37) */ + 0x0a4 0 /* NAND_DATA14 (IOCFG38) */ + 0x0a8 0 /* NAND_DATA15 (IOCFG39) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + nand_cfg_func2: nand_cfg_func2 { + pinctrl-single,pins = < + 0x044 0 /* NAND_RE_N (IOCFG14) */ + 0x048 0 /* NAND_WE_N (IOCFG15) */ + 0x04c 0 /* NAND_CS0_N (IOCFG16) */ + 0x050 0 /* NAND_CS1_N (IOCFG17) */ + 0x054 0 /* NAND_CS2_N (IOCFG18) */ + 0x058 0 /* NAND_CS3_N (IOCFG19) */ + 0x05c 0 /* NAND_BUSY0_N (IOCFG20) */ + 0x060 0 /* NAND_BUSY1_N (IOCFG21) */ + 0x064 0 /* NAND_BUSY2_N (IOCFG22) */ + 0x068 0 /* NAND_BUSY3_N (IOCFG23) */ + >; + pinctrl-single,bias-pulldown = <0 2 0 2>; + pinctrl-single,bias-pullup = <1 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + sdio_cfg_func: sdio_cfg_func { + pinctrl-single,pins = < + 0x1a4 0 /* SDIO0_CLK (IOCG113) */ + 0x1a8 0 /* SDIO0_CMD (IOCG114) */ + 0x1ac 0 /* SDIO0_DATA0 (IOCG115) */ + 0x1b0 0 /* SDIO0_DATA1 (IOCG116) */ + 0x1b4 0 /* SDIO0_DATA2 (IOCG117) */ + 0x1b8 0 /* SDIO0_DATA3 (IOCG118) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + pinctrl-single,drive-strength = <0x30 0xf0>; + }; + audio_out_cfg_func: audio_out_cfg_func { + pinctrl-single,pins = < + 0x200 0 /* GPIO (IOCFG136) */ + 0x204 0 /* GPIO (IOCFG137) */ + >; + pinctrl-single,bias-pulldown = <2 2 0 2>; + pinctrl-single,bias-pullup = <0 1 0 1>; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + call { + label = "call"; + gpios = <&gpio17 2 0>; + linux,code = <169>; /* KEY_PHONE */ + }; + }; +}; -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v11 3/6] ARM: config: enable hi3xxx in multi_v7_defconfig [not found] ` <1383813691-31587-1-git-send-email-haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> 2013-11-07 8:41 ` [PATCH v11 1/6] ARM: hi3xxx: add board support with device tree Haojian Zhuang 2013-11-07 8:41 ` [PATCH v11 2/6] ARM: dts: enable hi4511 " Haojian Zhuang @ 2013-11-07 8:41 ` Haojian Zhuang 2013-11-07 8:41 ` [PATCH v11 4/6] ARM: config: add defconfig for Hi3xxx Haojian Zhuang ` (2 subsequent siblings) 5 siblings, 0 replies; 17+ messages in thread From: Haojian Zhuang @ 2013-11-07 8:41 UTC (permalink / raw) To: arnd-r2nGTMty4D4, linux-lFZ/pmaqli7XmaaqVzeoHQ, linus.walleij-QSEj5FYQhm4dnm+yROfE0A, olof-nZhT3qVonbNeoWH0uzbU5w, rob.herring-bsGFqQB8/DxBDgjK7y7TUQ, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, tglx-hfZtesqFncYOwBW4kG4KsQ, mturquette-QSEj5FYQhm4dnm+yROfE0A, grant.likely-QSEj5FYQhm4dnm+yROfE0A, khilman-QSEj5FYQhm4dnm+yROfE0A, swarren-3lzwWm7+Weoh9ZMKESR00Q, shaojie.sun-QSEj5FYQhm4dnm+yROfE0A, devicetree-u79uwXL29TY76Z2rM5mHXA Cc: patches-QSEj5FYQhm4dnm+yROfE0A, Haojian Zhuang Enable ARCH_HI3xxx in multi_v7_defconfig. Signed-off-by: Haojian Zhuang <haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> --- arch/arm/configs/multi_v7_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 6e572c6..6855397 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -8,6 +8,7 @@ CONFIG_MACH_ARMADA_XP=y CONFIG_ARCH_BCM=y CONFIG_GPIO_PCA953X=y CONFIG_ARCH_HIGHBANK=y +CONFIG_ARCH_HI3xxx=y CONFIG_ARCH_KEYSTONE=y CONFIG_ARCH_MXC=y CONFIG_MACH_IMX51_DT=y -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v11 4/6] ARM: config: add defconfig for Hi3xxx [not found] ` <1383813691-31587-1-git-send-email-haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> ` (2 preceding siblings ...) 2013-11-07 8:41 ` [PATCH v11 3/6] ARM: config: enable hi3xxx in multi_v7_defconfig Haojian Zhuang @ 2013-11-07 8:41 ` Haojian Zhuang 2013-11-07 8:41 ` [PATCH v11 5/6] ARM: hi3xxx: add smp support Haojian Zhuang 2013-11-07 8:41 ` [PATCH v11 6/6] ARM: hi3xxx: add hotplug support Haojian Zhuang 5 siblings, 0 replies; 17+ messages in thread From: Haojian Zhuang @ 2013-11-07 8:41 UTC (permalink / raw) To: arnd-r2nGTMty4D4, linux-lFZ/pmaqli7XmaaqVzeoHQ, linus.walleij-QSEj5FYQhm4dnm+yROfE0A, olof-nZhT3qVonbNeoWH0uzbU5w, rob.herring-bsGFqQB8/DxBDgjK7y7TUQ, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, tglx-hfZtesqFncYOwBW4kG4KsQ, mturquette-QSEj5FYQhm4dnm+yROfE0A, grant.likely-QSEj5FYQhm4dnm+yROfE0A, khilman-QSEj5FYQhm4dnm+yROfE0A, swarren-3lzwWm7+Weoh9ZMKESR00Q, shaojie.sun-QSEj5FYQhm4dnm+yROfE0A, devicetree-u79uwXL29TY76Z2rM5mHXA Cc: patches-QSEj5FYQhm4dnm+yROfE0A, Haojian Zhuang Add default config for arch-hi3xxx. It's used for Hisilicon Hi3xxx SoC. Signed-off-by: Haojian Zhuang <haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> --- arch/arm/configs/hi3xxx_defconfig | 56 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) create mode 100644 arch/arm/configs/hi3xxx_defconfig diff --git a/arch/arm/configs/hi3xxx_defconfig b/arch/arm/configs/hi3xxx_defconfig new file mode 100644 index 0000000..f186bdf --- /dev/null +++ b/arch/arm/configs/hi3xxx_defconfig @@ -0,0 +1,56 @@ +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_RD_LZMA=y +CONFIG_ARCH_HI3xxx=y +CONFIG_SMP=y +CONFIG_PREEMPT=y +CONFIG_AEABI=y +CONFIG_ARM_APPENDED_DTB=y +CONFIG_NET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_NETDEVICES=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_SPI=y +CONFIG_SPI_PL022=y +CONFIG_PINCTRL_SINGLE=y +CONFIG_GPIO_GENERIC_PLATFORM=y +CONFIG_REGULATOR_GPIO=y +CONFIG_DRM=y +CONFIG_FB_SIMPLE=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_MXC=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_STORAGE=y +CONFIG_NOP_USB_XCEIV=y +CONFIG_MMC=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_PL031=y +CONFIG_DMADEVICES=y +CONFIG_DW_DMAC=y +CONFIG_PL330_DMA=y +CONFIG_PWM=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_KERNEL=y +CONFIG_LOCKUP_DETECTOR=y -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 17+ messages in thread
* [PATCH v11 5/6] ARM: hi3xxx: add smp support [not found] ` <1383813691-31587-1-git-send-email-haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> ` (3 preceding siblings ...) 2013-11-07 8:41 ` [PATCH v11 4/6] ARM: config: add defconfig for Hi3xxx Haojian Zhuang @ 2013-11-07 8:41 ` Haojian Zhuang [not found] ` <1383813691-31587-6-git-send-email-haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> 2013-11-07 8:41 ` [PATCH v11 6/6] ARM: hi3xxx: add hotplug support Haojian Zhuang 5 siblings, 1 reply; 17+ messages in thread From: Haojian Zhuang @ 2013-11-07 8:41 UTC (permalink / raw) To: arnd-r2nGTMty4D4, linux-lFZ/pmaqli7XmaaqVzeoHQ, linus.walleij-QSEj5FYQhm4dnm+yROfE0A, olof-nZhT3qVonbNeoWH0uzbU5w, rob.herring-bsGFqQB8/DxBDgjK7y7TUQ, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, tglx-hfZtesqFncYOwBW4kG4KsQ, mturquette-QSEj5FYQhm4dnm+yROfE0A, grant.likely-QSEj5FYQhm4dnm+yROfE0A, khilman-QSEj5FYQhm4dnm+yROfE0A, swarren-3lzwWm7+Weoh9ZMKESR00Q, shaojie.sun-QSEj5FYQhm4dnm+yROfE0A, devicetree-u79uwXL29TY76Z2rM5mHXA Cc: patches-QSEj5FYQhm4dnm+yROfE0A, Zhangfei Gao, Haojian Zhuang From: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> Enable SMP support on hi3xxx platform Signed-off-by: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> Tested-by: Zhang Mingjun <zhang.mingjun-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> Tested-by: Li Xin <li.xin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> Signed-off-by: Haojian Zhuang <haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> --- .../bindings/arm/hisilicon/hisilicon.txt | 30 ++++++-- arch/arm/boot/dts/hi3620.dtsi | 38 ++++++++++ arch/arm/mach-hi3xxx/Kconfig | 3 + arch/arm/mach-hi3xxx/Makefile | 1 + arch/arm/mach-hi3xxx/core.h | 11 +++ arch/arm/mach-hi3xxx/hi3xxx.c | 34 +++++++++ arch/arm/mach-hi3xxx/platsmp.c | 84 ++++++++++++++++++++++ 7 files changed, 197 insertions(+), 4 deletions(-) create mode 100644 arch/arm/mach-hi3xxx/core.h create mode 100644 arch/arm/mach-hi3xxx/platsmp.c diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt index 3be60c8..8c7a465 100644 --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt @@ -1,10 +1,32 @@ Hisilicon Platforms Device Tree Bindings ---------------------------------------------------- -Hi3716 Development Board -Required root node properties: - - compatible = "hisilicon,hi3716-dkb"; - Hi4511 Board Required root node properties: - compatible = "hisilicon,hi3620-hi4511"; + +Hisilicon system controller + +Required properties: +- compatible : "hisilicon,sysctrl" +- reg : Register address and size + +Optional properties: +- smp-offset : offset in sysctrl for notifying slave cpu booting + cpu 1, reg; + cpu 2, reg + 0x4; + cpu 3, reg + 0x8; + If reg value is not zero, cpun exit wfi and go +- resume-offset : offset in sysctrl for notifying cpu0 when resume +- reboot-offset : offset in sysctrl for system reboot + +Example: + + /* for Hi3620 */ + sysctrl: system-controller@fc802000 { + compatible = "hisilicon,sysctrl"; + reg = <0xfc802000 0x1000>; + smp-offset = <0x31c>; + resume-offset = <0x308>; + reboot-offset = <0x4>; + }; diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi index b9d8679..e311937 100644 --- a/arch/arm/boot/dts/hi3620.dtsi +++ b/arch/arm/boot/dts/hi3620.dtsi @@ -39,6 +39,27 @@ reg = <0x0>; next-level-cache = <&L2>; }; + + cpu@1 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2>; + }; + + cpu@2 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <2>; + next-level-cache = <&L2>; + }; + + cpu@3 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <3>; + next-level-cache = <&L2>; + }; }; amba { @@ -65,6 +86,17 @@ reg = <0x1000 0x1000>, <0x100 0x100>; }; + sysctrl: system-controller@802000 { + compatible = "hisilicon,sysctrl"; + reg = <0x802000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + smp-offset = <0x31c>; + resume-offset = <0x308>; + reboot-offset = <0x4>; + }; + dual_timer0: dual_timer@800000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x800000 0x1000>; @@ -115,6 +147,12 @@ status = "disabled"; }; + timer5: timer@600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x600 0x20>; + interrupts = <1 13 0xf01>; + }; + uart0: uart@b00000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xb00000 0x1000>; diff --git a/arch/arm/mach-hi3xxx/Kconfig b/arch/arm/mach-hi3xxx/Kconfig index 68bd26c..d0f298a 100644 --- a/arch/arm/mach-hi3xxx/Kconfig +++ b/arch/arm/mach-hi3xxx/Kconfig @@ -6,6 +6,9 @@ config ARCH_HI3xxx select CACHE_L2X0 select CLKSRC_OF select GENERIC_CLOCKEVENTS + select HAVE_ARM_SCU + select HAVE_ARM_TWD + select HAVE_SMP select PINCTRL select PINCTRL_SINGLE help diff --git a/arch/arm/mach-hi3xxx/Makefile b/arch/arm/mach-hi3xxx/Makefile index d68ebb3..7a869a7 100644 --- a/arch/arm/mach-hi3xxx/Makefile +++ b/arch/arm/mach-hi3xxx/Makefile @@ -3,3 +3,4 @@ # obj-y += hi3xxx.o +obj-$(CONFIG_SMP) += platsmp.o diff --git a/arch/arm/mach-hi3xxx/core.h b/arch/arm/mach-hi3xxx/core.h new file mode 100644 index 0000000..226f020 --- /dev/null +++ b/arch/arm/mach-hi3xxx/core.h @@ -0,0 +1,11 @@ +#ifndef __HISILICON_CORE_H +#define __HISILICON_CORE_H + +#include <linux/reboot.h> + +extern void hi3xxx_set_cpu_jump(int cpu, void *jump_addr); +extern int hi3xxx_get_cpu_jump(int cpu); +extern void secondary_startup(void); +extern struct smp_operations hi3xxx_smp_ops; + +#endif diff --git a/arch/arm/mach-hi3xxx/hi3xxx.c b/arch/arm/mach-hi3xxx/hi3xxx.c index 925af13..80990b3 100644 --- a/arch/arm/mach-hi3xxx/hi3xxx.c +++ b/arch/arm/mach-hi3xxx/hi3xxx.c @@ -14,11 +14,16 @@ #include <linux/clk-provider.h> #include <linux/clocksource.h> #include <linux/irqchip.h> +#include <linux/of_address.h> #include <linux/of_platform.h> +#include <asm/proc-fns.h> + #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include "core.h" + /* * This table is only for optimization. Since ioremap() could always share * the same mapping if it's defined as static IO mapping. @@ -29,6 +34,7 @@ */ static struct map_desc hi3620_io_desc[] __initdata = { { + /* sysctrl */ .pfn = __phys_to_pfn(0xfc802000), .virtual = 0xfe802000, .length = 0x1000, @@ -48,6 +54,32 @@ static void __init hi3xxx_timer_init(void) clocksource_of_init(); } +static void hi3xxx_restart(enum reboot_mode mode, const char *cmd) +{ + struct device_node *np; + void __iomem *base; + int offset; + + np = of_find_compatible_node(NULL, NULL, "hisilicon,sysctrl"); + if (!np) { + pr_err("failed to find hisilicon,sysctrl node\n"); + return; + } + base = of_iomap(np, 0); + if (!base) { + pr_err("failed to map address in hisilicon,sysctrl node\n"); + return; + } + if (of_property_read_u32(np, "reboot-offset", &offset) < 0) { + pr_err("failed to find reboot-offset property\n"); + return; + } + writel_relaxed(0xdeadbeef, base + offset); + + while (1) + cpu_do_idle(); +} + static const char *hi3xxx_compat[] __initdata = { "hisilicon,hi3620-hi4511", NULL, @@ -57,4 +89,6 @@ DT_MACHINE_START(HI3620, "Hisilicon Hi3620 (Flattened Device Tree)") .map_io = hi3620_map_io, .init_time = hi3xxx_timer_init, .dt_compat = hi3xxx_compat, + .smp = smp_ops(hi3xxx_smp_ops), + .restart = hi3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-hi3xxx/platsmp.c b/arch/arm/mach-hi3xxx/platsmp.c new file mode 100644 index 0000000..a4d04c0 --- /dev/null +++ b/arch/arm/mach-hi3xxx/platsmp.c @@ -0,0 +1,84 @@ +/* + * Copyright (c) 2013 Linaro Ltd. + * Copyright (c) 2013 Hisilicon Limited. + * Based on platsmp.c, Copyright (C) 2002 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ +#include <linux/smp.h> +#include <linux/io.h> +#include <linux/of_address.h> + +#include <asm/cacheflush.h> +#include <asm/smp_plat.h> +#include <asm/smp_scu.h> + +#include "core.h" + +static void __iomem *ctrl_base = NULL; + +void hi3xxx_set_cpu_jump(int cpu, void *jump_addr) +{ + cpu = cpu_logical_map(cpu); + if (!cpu || !ctrl_base) + return; + writel_relaxed(virt_to_phys(jump_addr), ctrl_base + ((cpu - 1) << 2)); +} + +int hi3xxx_get_cpu_jump(int cpu) +{ + cpu = cpu_logical_map(cpu); + if (!cpu || !ctrl_base) + return 0; + return readl_relaxed(ctrl_base + ((cpu - 1 ) << 2)); +} + +static void __init hi3xxx_smp_prepare_cpus(unsigned int max_cpus) +{ + struct device_node *np = NULL; + unsigned long base = 0; + u32 offset = 0; + void __iomem *scu_base = NULL; + + if (scu_a9_has_base()) { + base = scu_a9_get_base(); + scu_base = ioremap(base, SZ_4K); + if (!scu_base) { + pr_err("ioremap(scu_base) failed\n"); + return; + } + scu_enable(scu_base); + iounmap(scu_base); + } + if (!ctrl_base) { + np = of_find_compatible_node(NULL, NULL, "hisilicon,sysctrl"); + if (!np) { + pr_err("failed to find hisilicon,sysctrl node\n"); + return; + } + ctrl_base = of_iomap(np, 0); + if (!ctrl_base) { + pr_err("failed to map address\n"); + return; + } + if (of_property_read_u32(np, "smp-offset", &offset) < 0) { + pr_err("failed to find smp-offset property\n"); + return; + } + ctrl_base += offset; + } +} + +static int hi3xxx_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + hi3xxx_set_cpu_jump(cpu, secondary_startup); + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + return 0; +} + +struct smp_operations hi3xxx_smp_ops __initdata = { + .smp_prepare_cpus = hi3xxx_smp_prepare_cpus, + .smp_boot_secondary = hi3xxx_boot_secondary, +}; -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 17+ messages in thread
[parent not found: <1383813691-31587-6-git-send-email-haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>]
* Re: [PATCH v11 5/6] ARM: hi3xxx: add smp support [not found] ` <1383813691-31587-6-git-send-email-haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> @ 2013-11-07 10:30 ` Dinh Nguyen [not found] ` <527B6BCA.2010606-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 2013-11-12 22:53 ` Kevin Hilman 1 sibling, 1 reply; 17+ messages in thread From: Dinh Nguyen @ 2013-11-07 10:30 UTC (permalink / raw) To: Haojian Zhuang, arnd-r2nGTMty4D4, linux-lFZ/pmaqli7XmaaqVzeoHQ, linus.walleij-QSEj5FYQhm4dnm+yROfE0A, olof-nZhT3qVonbNeoWH0uzbU5w, rob.herring-bsGFqQB8/DxBDgjK7y7TUQ, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, tglx-hfZtesqFncYOwBW4kG4KsQ, mturquette-QSEj5FYQhm4dnm+yROfE0A, grant.likely-QSEj5FYQhm4dnm+yROfE0A, khilman-QSEj5FYQhm4dnm+yROfE0A, swarren-3lzwWm7+Weoh9ZMKESR00Q, shaojie.sun-QSEj5FYQhm4dnm+yROfE0A, devicetree-u79uwXL29TY76Z2rM5mHXA Cc: patches-QSEj5FYQhm4dnm+yROfE0A, Zhangfei Gao On 11/7/13 2:41 AM, Haojian Zhuang wrote: > From: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> > > Enable SMP support on hi3xxx platform > > Signed-off-by: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> > Tested-by: Zhang Mingjun <zhang.mingjun-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> > Tested-by: Li Xin <li.xin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> > Signed-off-by: Haojian Zhuang <haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> > --- > .../bindings/arm/hisilicon/hisilicon.txt | 30 ++++++-- > arch/arm/boot/dts/hi3620.dtsi | 38 ++++++++++ > arch/arm/mach-hi3xxx/Kconfig | 3 + > arch/arm/mach-hi3xxx/Makefile | 1 + > arch/arm/mach-hi3xxx/core.h | 11 +++ > arch/arm/mach-hi3xxx/hi3xxx.c | 34 +++++++++ > arch/arm/mach-hi3xxx/platsmp.c | 84 ++++++++++++++++++++++ > 7 files changed, 197 insertions(+), 4 deletions(-) > create mode 100644 arch/arm/mach-hi3xxx/core.h > create mode 100644 arch/arm/mach-hi3xxx/platsmp.c > > diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt > index 3be60c8..8c7a465 100644 > --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt > +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt > @@ -1,10 +1,32 @@ > Hisilicon Platforms Device Tree Bindings > ---------------------------------------------------- > > -Hi3716 Development Board > -Required root node properties: > - - compatible = "hisilicon,hi3716-dkb"; > - > Hi4511 Board > Required root node properties: > - compatible = "hisilicon,hi3620-hi4511"; > + > +Hisilicon system controller > + > +Required properties: > +- compatible : "hisilicon,sysctrl" > +- reg : Register address and size > + > +Optional properties: > +- smp-offset : offset in sysctrl for notifying slave cpu booting > + cpu 1, reg; > + cpu 2, reg + 0x4; > + cpu 3, reg + 0x8; > + If reg value is not zero, cpun exit wfi and go > +- resume-offset : offset in sysctrl for notifying cpu0 when resume > +- reboot-offset : offset in sysctrl for system reboot > + > +Example: > + > + /* for Hi3620 */ > + sysctrl: system-controller@fc802000 { > + compatible = "hisilicon,sysctrl"; > + reg = <0xfc802000 0x1000>; > + smp-offset = <0x31c>; > + resume-offset = <0x308>; > + reboot-offset = <0x4>; > + }; > diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi > index b9d8679..e311937 100644 > --- a/arch/arm/boot/dts/hi3620.dtsi > +++ b/arch/arm/boot/dts/hi3620.dtsi > @@ -39,6 +39,27 @@ > reg = <0x0>; > next-level-cache = <&L2>; > }; > + > + cpu@1 { > + compatible = "arm,cortex-a9"; > + device_type = "cpu"; > + reg = <1>; > + next-level-cache = <&L2>; > + }; > + > + cpu@2 { > + compatible = "arm,cortex-a9"; > + device_type = "cpu"; > + reg = <2>; > + next-level-cache = <&L2>; > + }; > + > + cpu@3 { > + compatible = "arm,cortex-a9"; > + device_type = "cpu"; > + reg = <3>; > + next-level-cache = <&L2>; > + }; > }; > > amba { > @@ -65,6 +86,17 @@ > reg = <0x1000 0x1000>, <0x100 0x100>; > }; > > + sysctrl: system-controller@802000 { > + compatible = "hisilicon,sysctrl"; > + reg = <0x802000 0x1000>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + smp-offset = <0x31c>; > + resume-offset = <0x308>; > + reboot-offset = <0x4>; > + }; > + > dual_timer0: dual_timer@800000 { > compatible = "arm,sp804", "arm,primecell"; > reg = <0x800000 0x1000>; > @@ -115,6 +147,12 @@ > status = "disabled"; > }; > > + timer5: timer@600 { > + compatible = "arm,cortex-a9-twd-timer"; > + reg = <0x600 0x20>; > + interrupts = <1 13 0xf01>; > + }; Do you have a clocks node for this timer? > + > uart0: uart@b00000 { > compatible = "arm,pl011", "arm,primecell"; > reg = <0xb00000 0x1000>; > diff --git a/arch/arm/mach-hi3xxx/Kconfig b/arch/arm/mach-hi3xxx/Kconfig > index 68bd26c..d0f298a 100644 > --- a/arch/arm/mach-hi3xxx/Kconfig > +++ b/arch/arm/mach-hi3xxx/Kconfig > @@ -6,6 +6,9 @@ config ARCH_HI3xxx > select CACHE_L2X0 > select CLKSRC_OF > select GENERIC_CLOCKEVENTS > + select HAVE_ARM_SCU > + select HAVE_ARM_TWD Need "if SMP" to avoid a build failure for a non-smp kernel. Dinh > + select HAVE_SMP > select PINCTRL > select PINCTRL_SINGLE > help > diff --git a/arch/arm/mach-hi3xxx/Makefile b/arch/arm/mach-hi3xxx/Makefile > index d68ebb3..7a869a7 100644 > --- a/arch/arm/mach-hi3xxx/Makefile > +++ b/arch/arm/mach-hi3xxx/Makefile > @@ -3,3 +3,4 @@ > # > > obj-y += hi3xxx.o > +obj-$(CONFIG_SMP) += platsmp.o > diff --git a/arch/arm/mach-hi3xxx/core.h b/arch/arm/mach-hi3xxx/core.h > new file mode 100644 > index 0000000..226f020 > --- /dev/null > +++ b/arch/arm/mach-hi3xxx/core.h > @@ -0,0 +1,11 @@ > +#ifndef __HISILICON_CORE_H > +#define __HISILICON_CORE_H > + > +#include <linux/reboot.h> > + > +extern void hi3xxx_set_cpu_jump(int cpu, void *jump_addr); > +extern int hi3xxx_get_cpu_jump(int cpu); > +extern void secondary_startup(void); > +extern struct smp_operations hi3xxx_smp_ops; > + > +#endif > diff --git a/arch/arm/mach-hi3xxx/hi3xxx.c b/arch/arm/mach-hi3xxx/hi3xxx.c > index 925af13..80990b3 100644 > --- a/arch/arm/mach-hi3xxx/hi3xxx.c > +++ b/arch/arm/mach-hi3xxx/hi3xxx.c > @@ -14,11 +14,16 @@ > #include <linux/clk-provider.h> > #include <linux/clocksource.h> > #include <linux/irqchip.h> > +#include <linux/of_address.h> > #include <linux/of_platform.h> > > +#include <asm/proc-fns.h> > + > #include <asm/mach/arch.h> > #include <asm/mach/map.h> > > +#include "core.h" > + > /* > * This table is only for optimization. Since ioremap() could always share > * the same mapping if it's defined as static IO mapping. > @@ -29,6 +34,7 @@ > */ > static struct map_desc hi3620_io_desc[] __initdata = { > { > + /* sysctrl */ What's this comment for? > .pfn = __phys_to_pfn(0xfc802000), > .virtual = 0xfe802000, > .length = 0x1000, > @@ -48,6 +54,32 @@ static void __init hi3xxx_timer_init(void) > clocksource_of_init(); > } > > +static void hi3xxx_restart(enum reboot_mode mode, const char *cmd) > +{ > + struct device_node *np; > + void __iomem *base; > + int offset; > + > + np = of_find_compatible_node(NULL, NULL, "hisilicon,sysctrl"); > + if (!np) { > + pr_err("failed to find hisilicon,sysctrl node\n"); > + return; > + } > + base = of_iomap(np, 0); > + if (!base) { > + pr_err("failed to map address in hisilicon,sysctrl node\n"); > + return; > + } > + if (of_property_read_u32(np, "reboot-offset", &offset) < 0) { > + pr_err("failed to find reboot-offset property\n"); > + return; > + } > + writel_relaxed(0xdeadbeef, base + offset); > + > + while (1) > + cpu_do_idle(); > +} > + > static const char *hi3xxx_compat[] __initdata = { > "hisilicon,hi3620-hi4511", > NULL, > @@ -57,4 +89,6 @@ DT_MACHINE_START(HI3620, "Hisilicon Hi3620 (Flattened Device Tree)") > .map_io = hi3620_map_io, > .init_time = hi3xxx_timer_init, > .dt_compat = hi3xxx_compat, > + .smp = smp_ops(hi3xxx_smp_ops), > + .restart = hi3xxx_restart, > MACHINE_END > diff --git a/arch/arm/mach-hi3xxx/platsmp.c b/arch/arm/mach-hi3xxx/platsmp.c > new file mode 100644 > index 0000000..a4d04c0 > --- /dev/null > +++ b/arch/arm/mach-hi3xxx/platsmp.c > @@ -0,0 +1,84 @@ > +/* > + * Copyright (c) 2013 Linaro Ltd. > + * Copyright (c) 2013 Hisilicon Limited. > + * Based on platsmp.c, Copyright (C) 2002 ARM Ltd. > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms and conditions of the GNU General Public License, > + * version 2, as published by the Free Software Foundation. > + */ > +#include <linux/smp.h> > +#include <linux/io.h> > +#include <linux/of_address.h> > + > +#include <asm/cacheflush.h> > +#include <asm/smp_plat.h> > +#include <asm/smp_scu.h> > + > +#include "core.h" > + > +static void __iomem *ctrl_base = NULL; > + > +void hi3xxx_set_cpu_jump(int cpu, void *jump_addr) > +{ > + cpu = cpu_logical_map(cpu); > + if (!cpu || !ctrl_base) > + return; > + writel_relaxed(virt_to_phys(jump_addr), ctrl_base + ((cpu - 1) << 2)); > +} > + > +int hi3xxx_get_cpu_jump(int cpu) > +{ > + cpu = cpu_logical_map(cpu); > + if (!cpu || !ctrl_base) > + return 0; > + return readl_relaxed(ctrl_base + ((cpu - 1 ) << 2)); > +} > + > +static void __init hi3xxx_smp_prepare_cpus(unsigned int max_cpus) > +{ > + struct device_node *np = NULL; > + unsigned long base = 0; > + u32 offset = 0; > + void __iomem *scu_base = NULL; > + > + if (scu_a9_has_base()) { > + base = scu_a9_get_base(); > + scu_base = ioremap(base, SZ_4K); > + if (!scu_base) { > + pr_err("ioremap(scu_base) failed\n"); > + return; > + } > + scu_enable(scu_base); > + iounmap(scu_base); > + } > + if (!ctrl_base) { > + np = of_find_compatible_node(NULL, NULL, "hisilicon,sysctrl"); > + if (!np) { > + pr_err("failed to find hisilicon,sysctrl node\n"); > + return; > + } > + ctrl_base = of_iomap(np, 0); > + if (!ctrl_base) { > + pr_err("failed to map address\n"); > + return; > + } > + if (of_property_read_u32(np, "smp-offset", &offset) < 0) { > + pr_err("failed to find smp-offset property\n"); > + return; > + } > + ctrl_base += offset; > + } > +} > + > +static int hi3xxx_boot_secondary(unsigned int cpu, struct task_struct *idle) > +{ > + hi3xxx_set_cpu_jump(cpu, secondary_startup); > + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); > + return 0; > +} > + > +struct smp_operations hi3xxx_smp_ops __initdata = { > + .smp_prepare_cpus = hi3xxx_smp_prepare_cpus, > + .smp_boot_secondary = hi3xxx_boot_secondary, > +}; -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 17+ messages in thread
[parent not found: <527B6BCA.2010606-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]
* Re: [PATCH v11 5/6] ARM: hi3xxx: add smp support [not found] ` <527B6BCA.2010606-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> @ 2013-11-12 8:49 ` Haojian Zhuang [not found] ` <CAD6h2NRTc42YAKr6zLdMpiYbpBLatA9HNpZeFa3pZZpvJXBuCg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 0 siblings, 1 reply; 17+ messages in thread From: Haojian Zhuang @ 2013-11-12 8:49 UTC (permalink / raw) To: Dinh Nguyen Cc: Arnd Bergmann, Russell King - ARM Linux, Linus Walleij, Olof Johansson, Rob Herring, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org, Mike Turquette, Grant Likely, Kevin Hilman, Stephen Warren, Shaojie Sun, devicetree-u79uwXL29TY76Z2rM5mHXA, Patch Tracking, Zhangfei Gao On 7 November 2013 18:30, Dinh Nguyen <dinh.linux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote: > > On 11/7/13 2:41 AM, Haojian Zhuang wrote: >> From: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >> >> Enable SMP support on hi3xxx platform >> >> Signed-off-by: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >> Tested-by: Zhang Mingjun <zhang.mingjun-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >> Tested-by: Li Xin <li.xin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >> Signed-off-by: Haojian Zhuang <haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >> --- >> .../bindings/arm/hisilicon/hisilicon.txt | 30 ++++++-- >> arch/arm/boot/dts/hi3620.dtsi | 38 ++++++++++ >> arch/arm/mach-hi3xxx/Kconfig | 3 + >> arch/arm/mach-hi3xxx/Makefile | 1 + >> arch/arm/mach-hi3xxx/core.h | 11 +++ >> arch/arm/mach-hi3xxx/hi3xxx.c | 34 +++++++++ >> arch/arm/mach-hi3xxx/platsmp.c | 84 ++++++++++++++++++++++ >> 7 files changed, 197 insertions(+), 4 deletions(-) >> create mode 100644 arch/arm/mach-hi3xxx/core.h >> create mode 100644 arch/arm/mach-hi3xxx/platsmp.c >> >> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt >> index 3be60c8..8c7a465 100644 >> --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt >> +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt >> @@ -1,10 +1,32 @@ >> Hisilicon Platforms Device Tree Bindings >> ---------------------------------------------------- >> >> -Hi3716 Development Board >> -Required root node properties: >> - - compatible = "hisilicon,hi3716-dkb"; >> - >> Hi4511 Board >> Required root node properties: >> - compatible = "hisilicon,hi3620-hi4511"; >> + >> +Hisilicon system controller >> + >> +Required properties: >> +- compatible : "hisilicon,sysctrl" >> +- reg : Register address and size >> + >> +Optional properties: >> +- smp-offset : offset in sysctrl for notifying slave cpu booting >> + cpu 1, reg; >> + cpu 2, reg + 0x4; >> + cpu 3, reg + 0x8; >> + If reg value is not zero, cpun exit wfi and go >> +- resume-offset : offset in sysctrl for notifying cpu0 when resume >> +- reboot-offset : offset in sysctrl for system reboot >> + >> +Example: >> + >> + /* for Hi3620 */ >> + sysctrl: system-controller@fc802000 { >> + compatible = "hisilicon,sysctrl"; >> + reg = <0xfc802000 0x1000>; >> + smp-offset = <0x31c>; >> + resume-offset = <0x308>; >> + reboot-offset = <0x4>; >> + }; >> diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi >> index b9d8679..e311937 100644 >> --- a/arch/arm/boot/dts/hi3620.dtsi >> +++ b/arch/arm/boot/dts/hi3620.dtsi >> @@ -39,6 +39,27 @@ >> reg = <0x0>; >> next-level-cache = <&L2>; >> }; >> + >> + cpu@1 { >> + compatible = "arm,cortex-a9"; >> + device_type = "cpu"; >> + reg = <1>; >> + next-level-cache = <&L2>; >> + }; >> + >> + cpu@2 { >> + compatible = "arm,cortex-a9"; >> + device_type = "cpu"; >> + reg = <2>; >> + next-level-cache = <&L2>; >> + }; >> + >> + cpu@3 { >> + compatible = "arm,cortex-a9"; >> + device_type = "cpu"; >> + reg = <3>; >> + next-level-cache = <&L2>; >> + }; >> }; >> >> amba { >> @@ -65,6 +86,17 @@ >> reg = <0x1000 0x1000>, <0x100 0x100>; >> }; >> >> + sysctrl: system-controller@802000 { >> + compatible = "hisilicon,sysctrl"; >> + reg = <0x802000 0x1000>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + smp-offset = <0x31c>; >> + resume-offset = <0x308>; >> + reboot-offset = <0x4>; >> + }; >> + >> dual_timer0: dual_timer@800000 { >> compatible = "arm,sp804", "arm,primecell"; >> reg = <0x800000 0x1000>; >> @@ -115,6 +147,12 @@ >> status = "disabled"; >> }; >> >> + timer5: timer@600 { >> + compatible = "arm,cortex-a9-twd-timer"; >> + reg = <0x600 0x20>; >> + interrupts = <1 13 0xf01>; >> + }; > Do you have a clocks node for this timer? As I mentioned in the 0th patch, clock binding are totally removed in this patch. And clock driver will be append in another patch set. >> + >> uart0: uart@b00000 { >> compatible = "arm,pl011", "arm,primecell"; >> reg = <0xb00000 0x1000>; >> diff --git a/arch/arm/mach-hi3xxx/Kconfig b/arch/arm/mach-hi3xxx/Kconfig >> index 68bd26c..d0f298a 100644 >> --- a/arch/arm/mach-hi3xxx/Kconfig >> +++ b/arch/arm/mach-hi3xxx/Kconfig >> @@ -6,6 +6,9 @@ config ARCH_HI3xxx >> select CACHE_L2X0 >> select CLKSRC_OF >> select GENERIC_CLOCKEVENTS >> + select HAVE_ARM_SCU >> + select HAVE_ARM_TWD > Need "if SMP" to avoid a build failure for a non-smp kernel. > ARCH_HI3xxx always need SMP configuration. HAVE_SMP is already required. So it's impossible to build a non-smp kernel with this kernel configuration. > Dinh >> + select HAVE_SMP >> select PINCTRL >> select PINCTRL_SINGLE >> help >> diff --git a/arch/arm/mach-hi3xxx/Makefile b/arch/arm/mach-hi3xxx/Makefile >> index d68ebb3..7a869a7 100644 >> --- a/arch/arm/mach-hi3xxx/Makefile >> +++ b/arch/arm/mach-hi3xxx/Makefile >> @@ -3,3 +3,4 @@ >> # >> >> obj-y += hi3xxx.o >> +obj-$(CONFIG_SMP) += platsmp.o >> diff --git a/arch/arm/mach-hi3xxx/core.h b/arch/arm/mach-hi3xxx/core.h >> new file mode 100644 >> index 0000000..226f020 >> --- /dev/null >> +++ b/arch/arm/mach-hi3xxx/core.h >> @@ -0,0 +1,11 @@ >> +#ifndef __HISILICON_CORE_H >> +#define __HISILICON_CORE_H >> + >> +#include <linux/reboot.h> >> + >> +extern void hi3xxx_set_cpu_jump(int cpu, void *jump_addr); >> +extern int hi3xxx_get_cpu_jump(int cpu); >> +extern void secondary_startup(void); >> +extern struct smp_operations hi3xxx_smp_ops; >> + >> +#endif >> diff --git a/arch/arm/mach-hi3xxx/hi3xxx.c b/arch/arm/mach-hi3xxx/hi3xxx.c >> index 925af13..80990b3 100644 >> --- a/arch/arm/mach-hi3xxx/hi3xxx.c >> +++ b/arch/arm/mach-hi3xxx/hi3xxx.c >> @@ -14,11 +14,16 @@ >> #include <linux/clk-provider.h> >> #include <linux/clocksource.h> >> #include <linux/irqchip.h> >> +#include <linux/of_address.h> >> #include <linux/of_platform.h> >> >> +#include <asm/proc-fns.h> >> + >> #include <asm/mach/arch.h> >> #include <asm/mach/map.h> >> >> +#include "core.h" >> + >> /* >> * This table is only for optimization. Since ioremap() could always share >> * the same mapping if it's defined as static IO mapping. >> @@ -29,6 +34,7 @@ >> */ >> static struct map_desc hi3620_io_desc[] __initdata = { >> { >> + /* sysctrl */ > What's this comment for? >> .pfn = __phys_to_pfn(0xfc802000), >> .virtual = 0xfe802000, >> .length = 0x1000, >> @@ -48,6 +54,32 @@ static void __init hi3xxx_timer_init(void) >> clocksource_of_init(); >> } >> >> +static void hi3xxx_restart(enum reboot_mode mode, const char *cmd) >> +{ >> + struct device_node *np; >> + void __iomem *base; >> + int offset; >> + >> + np = of_find_compatible_node(NULL, NULL, "hisilicon,sysctrl"); >> + if (!np) { >> + pr_err("failed to find hisilicon,sysctrl node\n"); >> + return; >> + } >> + base = of_iomap(np, 0); >> + if (!base) { >> + pr_err("failed to map address in hisilicon,sysctrl node\n"); >> + return; >> + } >> + if (of_property_read_u32(np, "reboot-offset", &offset) < 0) { >> + pr_err("failed to find reboot-offset property\n"); >> + return; >> + } >> + writel_relaxed(0xdeadbeef, base + offset); >> + >> + while (1) >> + cpu_do_idle(); >> +} >> + >> static const char *hi3xxx_compat[] __initdata = { >> "hisilicon,hi3620-hi4511", >> NULL, >> @@ -57,4 +89,6 @@ DT_MACHINE_START(HI3620, "Hisilicon Hi3620 (Flattened Device Tree)") >> .map_io = hi3620_map_io, >> .init_time = hi3xxx_timer_init, >> .dt_compat = hi3xxx_compat, >> + .smp = smp_ops(hi3xxx_smp_ops), >> + .restart = hi3xxx_restart, >> MACHINE_END >> diff --git a/arch/arm/mach-hi3xxx/platsmp.c b/arch/arm/mach-hi3xxx/platsmp.c >> new file mode 100644 >> index 0000000..a4d04c0 >> --- /dev/null >> +++ b/arch/arm/mach-hi3xxx/platsmp.c >> @@ -0,0 +1,84 @@ >> +/* >> + * Copyright (c) 2013 Linaro Ltd. >> + * Copyright (c) 2013 Hisilicon Limited. >> + * Based on platsmp.c, Copyright (C) 2002 ARM Ltd. >> + * >> + * This program is free software; you can redistribute it and/or modify it >> + * under the terms and conditions of the GNU General Public License, >> + * version 2, as published by the Free Software Foundation. >> + */ >> +#include <linux/smp.h> >> +#include <linux/io.h> >> +#include <linux/of_address.h> >> + >> +#include <asm/cacheflush.h> >> +#include <asm/smp_plat.h> >> +#include <asm/smp_scu.h> >> + >> +#include "core.h" >> + >> +static void __iomem *ctrl_base = NULL; >> + >> +void hi3xxx_set_cpu_jump(int cpu, void *jump_addr) >> +{ >> + cpu = cpu_logical_map(cpu); >> + if (!cpu || !ctrl_base) >> + return; >> + writel_relaxed(virt_to_phys(jump_addr), ctrl_base + ((cpu - 1) << 2)); >> +} >> + >> +int hi3xxx_get_cpu_jump(int cpu) >> +{ >> + cpu = cpu_logical_map(cpu); >> + if (!cpu || !ctrl_base) >> + return 0; >> + return readl_relaxed(ctrl_base + ((cpu - 1 ) << 2)); >> +} >> + >> +static void __init hi3xxx_smp_prepare_cpus(unsigned int max_cpus) >> +{ >> + struct device_node *np = NULL; >> + unsigned long base = 0; >> + u32 offset = 0; >> + void __iomem *scu_base = NULL; >> + >> + if (scu_a9_has_base()) { >> + base = scu_a9_get_base(); >> + scu_base = ioremap(base, SZ_4K); >> + if (!scu_base) { >> + pr_err("ioremap(scu_base) failed\n"); >> + return; >> + } >> + scu_enable(scu_base); >> + iounmap(scu_base); >> + } >> + if (!ctrl_base) { >> + np = of_find_compatible_node(NULL, NULL, "hisilicon,sysctrl"); >> + if (!np) { >> + pr_err("failed to find hisilicon,sysctrl node\n"); >> + return; >> + } >> + ctrl_base = of_iomap(np, 0); >> + if (!ctrl_base) { >> + pr_err("failed to map address\n"); >> + return; >> + } >> + if (of_property_read_u32(np, "smp-offset", &offset) < 0) { >> + pr_err("failed to find smp-offset property\n"); >> + return; >> + } >> + ctrl_base += offset; >> + } >> +} >> + >> +static int hi3xxx_boot_secondary(unsigned int cpu, struct task_struct *idle) >> +{ >> + hi3xxx_set_cpu_jump(cpu, secondary_startup); >> + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); >> + return 0; >> +} >> + >> +struct smp_operations hi3xxx_smp_ops __initdata = { >> + .smp_prepare_cpus = hi3xxx_smp_prepare_cpus, >> + .smp_boot_secondary = hi3xxx_boot_secondary, >> +}; > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 17+ messages in thread
[parent not found: <CAD6h2NRTc42YAKr6zLdMpiYbpBLatA9HNpZeFa3pZZpvJXBuCg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* Re: [PATCH v11 5/6] ARM: hi3xxx: add smp support [not found] ` <CAD6h2NRTc42YAKr6zLdMpiYbpBLatA9HNpZeFa3pZZpvJXBuCg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> @ 2013-11-12 23:00 ` Kevin Hilman [not found] ` <87txfhmdi3.fsf-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> 2013-11-25 4:00 ` Olof Johansson 1 sibling, 1 reply; 17+ messages in thread From: Kevin Hilman @ 2013-11-12 23:00 UTC (permalink / raw) To: Haojian Zhuang Cc: Dinh Nguyen, Arnd Bergmann, Russell King - ARM Linux, Linus Walleij, Olof Johansson, Rob Herring, linux-arm-kernel@lists.infradead.org, tglx@linutronix.de, Mike Turquette, Grant Likely, Stephen Warren, Shaojie Sun, devicetree-u79uwXL29TY76Z2rM5mHXA, Patch Tracking, Zhangfei Gao Haojian Zhuang <haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> writes: > On 7 November 2013 18:30, Dinh Nguyen <dinh.linux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote: >> >> On 11/7/13 2:41 AM, Haojian Zhuang wrote: >>> From: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >>> >>> Enable SMP support on hi3xxx platform >>> >>> Signed-off-by: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >>> Tested-by: Zhang Mingjun <zhang.mingjun-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >>> Tested-by: Li Xin <li.xin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >>> Signed-off-by: Haojian Zhuang <haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >>> --- >>> .../bindings/arm/hisilicon/hisilicon.txt | 30 ++++++-- >>> arch/arm/boot/dts/hi3620.dtsi | 38 ++++++++++ >>> arch/arm/mach-hi3xxx/Kconfig | 3 + >>> arch/arm/mach-hi3xxx/Makefile | 1 + >>> arch/arm/mach-hi3xxx/core.h | 11 +++ >>> arch/arm/mach-hi3xxx/hi3xxx.c | 34 +++++++++ >>> arch/arm/mach-hi3xxx/platsmp.c | 84 ++++++++++++++++++++++ >>> 7 files changed, 197 insertions(+), 4 deletions(-) >>> create mode 100644 arch/arm/mach-hi3xxx/core.h >>> create mode 100644 arch/arm/mach-hi3xxx/platsmp.c >>> >>> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt >>> index 3be60c8..8c7a465 100644 >>> --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt >>> +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt >>> @@ -1,10 +1,32 @@ >>> Hisilicon Platforms Device Tree Bindings >>> ---------------------------------------------------- >>> >>> -Hi3716 Development Board >>> -Required root node properties: >>> - - compatible = "hisilicon,hi3716-dkb"; >>> - >>> Hi4511 Board >>> Required root node properties: >>> - compatible = "hisilicon,hi3620-hi4511"; >>> + >>> +Hisilicon system controller >>> + >>> +Required properties: >>> +- compatible : "hisilicon,sysctrl" >>> +- reg : Register address and size >>> + >>> +Optional properties: >>> +- smp-offset : offset in sysctrl for notifying slave cpu booting >>> + cpu 1, reg; >>> + cpu 2, reg + 0x4; >>> + cpu 3, reg + 0x8; >>> + If reg value is not zero, cpun exit wfi and go >>> +- resume-offset : offset in sysctrl for notifying cpu0 when resume >>> +- reboot-offset : offset in sysctrl for system reboot >>> + >>> +Example: >>> + >>> + /* for Hi3620 */ >>> + sysctrl: system-controller@fc802000 { >>> + compatible = "hisilicon,sysctrl"; >>> + reg = <0xfc802000 0x1000>; >>> + smp-offset = <0x31c>; >>> + resume-offset = <0x308>; >>> + reboot-offset = <0x4>; >>> + }; >>> diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi >>> index b9d8679..e311937 100644 >>> --- a/arch/arm/boot/dts/hi3620.dtsi >>> +++ b/arch/arm/boot/dts/hi3620.dtsi >>> @@ -39,6 +39,27 @@ >>> reg = <0x0>; >>> next-level-cache = <&L2>; >>> }; >>> + >>> + cpu@1 { >>> + compatible = "arm,cortex-a9"; >>> + device_type = "cpu"; >>> + reg = <1>; >>> + next-level-cache = <&L2>; >>> + }; >>> + >>> + cpu@2 { >>> + compatible = "arm,cortex-a9"; >>> + device_type = "cpu"; >>> + reg = <2>; >>> + next-level-cache = <&L2>; >>> + }; >>> + >>> + cpu@3 { >>> + compatible = "arm,cortex-a9"; >>> + device_type = "cpu"; >>> + reg = <3>; >>> + next-level-cache = <&L2>; >>> + }; >>> }; >>> >>> amba { >>> @@ -65,6 +86,17 @@ >>> reg = <0x1000 0x1000>, <0x100 0x100>; >>> }; >>> >>> + sysctrl: system-controller@802000 { >>> + compatible = "hisilicon,sysctrl"; >>> + reg = <0x802000 0x1000>; >>> + #address-cells = <1>; >>> + #size-cells = <0>; >>> + >>> + smp-offset = <0x31c>; >>> + resume-offset = <0x308>; >>> + reboot-offset = <0x4>; >>> + }; >>> + >>> dual_timer0: dual_timer@800000 { >>> compatible = "arm,sp804", "arm,primecell"; >>> reg = <0x800000 0x1000>; >>> @@ -115,6 +147,12 @@ >>> status = "disabled"; >>> }; >>> >>> + timer5: timer@600 { >>> + compatible = "arm,cortex-a9-twd-timer"; >>> + reg = <0x600 0x20>; >>> + interrupts = <1 13 0xf01>; >>> + }; >> Do you have a clocks node for this timer? > > As I mentioned in the 0th patch, clock binding are totally removed > in this patch. And clock driver will be append in another patch set. Still, won't this timer still need a dummy fixed-rate clock until the real clocks are in place? Otherwise it seems twd_get_clock() is going to fail. Kevin -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 17+ messages in thread
[parent not found: <87txfhmdi3.fsf-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>]
* Re: [PATCH v11 5/6] ARM: hi3xxx: add smp support [not found] ` <87txfhmdi3.fsf-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> @ 2013-11-12 23:39 ` Haojian Zhuang 0 siblings, 0 replies; 17+ messages in thread From: Haojian Zhuang @ 2013-11-12 23:39 UTC (permalink / raw) To: Kevin Hilman Cc: Dinh Nguyen, Arnd Bergmann, Russell King - ARM Linux, Linus Walleij, Olof Johansson, Rob Herring, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org, Mike Turquette, Grant Likely, Stephen Warren, Shaojie Sun, devicetree-u79uwXL29TY76Z2rM5mHXA, Patch Tracking, Zhangfei Gao On 11/13/2013 07:00 AM, Kevin Hilman wrote: > Haojian Zhuang <haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> writes: > >> On 7 November 2013 18:30, Dinh Nguyen <dinh.linux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote: >>> On 11/7/13 2:41 AM, Haojian Zhuang wrote: >>>> From: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >>>> >>>> Enable SMP support on hi3xxx platform >>>> >>>> Signed-off-by: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >>>> Tested-by: Zhang Mingjun <zhang.mingjun-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >>>> Tested-by: Li Xin <li.xin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >>>> Signed-off-by: Haojian Zhuang <haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >>>> --- >>>> .../bindings/arm/hisilicon/hisilicon.txt | 30 ++++++-- >>>> arch/arm/boot/dts/hi3620.dtsi | 38 ++++++++++ >>>> arch/arm/mach-hi3xxx/Kconfig | 3 + >>>> arch/arm/mach-hi3xxx/Makefile | 1 + >>>> arch/arm/mach-hi3xxx/core.h | 11 +++ >>>> arch/arm/mach-hi3xxx/hi3xxx.c | 34 +++++++++ >>>> arch/arm/mach-hi3xxx/platsmp.c | 84 ++++++++++++++++++++++ >>>> 7 files changed, 197 insertions(+), 4 deletions(-) >>>> create mode 100644 arch/arm/mach-hi3xxx/core.h >>>> create mode 100644 arch/arm/mach-hi3xxx/platsmp.c >>>> >>>> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt >>>> index 3be60c8..8c7a465 100644 >>>> --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt >>>> +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt >>>> @@ -1,10 +1,32 @@ >>>> Hisilicon Platforms Device Tree Bindings >>>> ---------------------------------------------------- >>>> >>>> -Hi3716 Development Board >>>> -Required root node properties: >>>> - - compatible = "hisilicon,hi3716-dkb"; >>>> - >>>> Hi4511 Board >>>> Required root node properties: >>>> - compatible = "hisilicon,hi3620-hi4511"; >>>> + >>>> +Hisilicon system controller >>>> + >>>> +Required properties: >>>> +- compatible : "hisilicon,sysctrl" >>>> +- reg : Register address and size >>>> + >>>> +Optional properties: >>>> +- smp-offset : offset in sysctrl for notifying slave cpu booting >>>> + cpu 1, reg; >>>> + cpu 2, reg + 0x4; >>>> + cpu 3, reg + 0x8; >>>> + If reg value is not zero, cpun exit wfi and go >>>> +- resume-offset : offset in sysctrl for notifying cpu0 when resume >>>> +- reboot-offset : offset in sysctrl for system reboot >>>> + >>>> +Example: >>>> + >>>> + /* for Hi3620 */ >>>> + sysctrl: system-controller@fc802000 { >>>> + compatible = "hisilicon,sysctrl"; >>>> + reg = <0xfc802000 0x1000>; >>>> + smp-offset = <0x31c>; >>>> + resume-offset = <0x308>; >>>> + reboot-offset = <0x4>; >>>> + }; >>>> diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi >>>> index b9d8679..e311937 100644 >>>> --- a/arch/arm/boot/dts/hi3620.dtsi >>>> +++ b/arch/arm/boot/dts/hi3620.dtsi >>>> @@ -39,6 +39,27 @@ >>>> reg = <0x0>; >>>> next-level-cache = <&L2>; >>>> }; >>>> + >>>> + cpu@1 { >>>> + compatible = "arm,cortex-a9"; >>>> + device_type = "cpu"; >>>> + reg = <1>; >>>> + next-level-cache = <&L2>; >>>> + }; >>>> + >>>> + cpu@2 { >>>> + compatible = "arm,cortex-a9"; >>>> + device_type = "cpu"; >>>> + reg = <2>; >>>> + next-level-cache = <&L2>; >>>> + }; >>>> + >>>> + cpu@3 { >>>> + compatible = "arm,cortex-a9"; >>>> + device_type = "cpu"; >>>> + reg = <3>; >>>> + next-level-cache = <&L2>; >>>> + }; >>>> }; >>>> >>>> amba { >>>> @@ -65,6 +86,17 @@ >>>> reg = <0x1000 0x1000>, <0x100 0x100>; >>>> }; >>>> >>>> + sysctrl: system-controller@802000 { >>>> + compatible = "hisilicon,sysctrl"; >>>> + reg = <0x802000 0x1000>; >>>> + #address-cells = <1>; >>>> + #size-cells = <0>; >>>> + >>>> + smp-offset = <0x31c>; >>>> + resume-offset = <0x308>; >>>> + reboot-offset = <0x4>; >>>> + }; >>>> + >>>> dual_timer0: dual_timer@800000 { >>>> compatible = "arm,sp804", "arm,primecell"; >>>> reg = <0x800000 0x1000>; >>>> @@ -115,6 +147,12 @@ >>>> status = "disabled"; >>>> }; >>>> >>>> + timer5: timer@600 { >>>> + compatible = "arm,cortex-a9-twd-timer"; >>>> + reg = <0x600 0x20>; >>>> + interrupts = <1 13 0xf01>; >>>> + }; >>> Do you have a clocks node for this timer? >> As I mentioned in the 0th patch, clock binding are totally removed >> in this patch. And clock driver will be append in another patch set. > Still, won't this timer still need a dummy fixed-rate clock until the > real clocks are in place? Otherwise it seems twd_get_clock() is going > to fail. > > Kevin sp804 is working. twd_get_clock() fails but it could calculate rate. I tested on my platform. With this dummy fixed-rate clock, it could work. Regards Haojian -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v11 5/6] ARM: hi3xxx: add smp support [not found] ` <CAD6h2NRTc42YAKr6zLdMpiYbpBLatA9HNpZeFa3pZZpvJXBuCg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2013-11-12 23:00 ` Kevin Hilman @ 2013-11-25 4:00 ` Olof Johansson [not found] ` <CAOesGMiL_Ev647aVTDnwLVM7b_uOA3Qwd6TUXaOTC5b9H2w02w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 1 sibling, 1 reply; 17+ messages in thread From: Olof Johansson @ 2013-11-25 4:00 UTC (permalink / raw) To: Haojian Zhuang Cc: Dinh Nguyen, Arnd Bergmann, Russell King - ARM Linux, Linus Walleij, Rob Herring, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org, Mike Turquette, Grant Likely, Kevin Hilman, Stephen Warren, Shaojie Sun, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Patch Tracking, Zhangfei Gao On Tue, Nov 12, 2013 at 12:49 AM, Haojian Zhuang <haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> wrote: > On 7 November 2013 18:30, Dinh Nguyen <dinh.linux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote: >> >> On 11/7/13 2:41 AM, Haojian Zhuang wrote: >>> From: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >>> >>> Enable SMP support on hi3xxx platform >>> >>> Signed-off-by: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >>> Tested-by: Zhang Mingjun <zhang.mingjun-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >>> Tested-by: Li Xin <li.xin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >>> Signed-off-by: Haojian Zhuang <haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >>> --- >>> .../bindings/arm/hisilicon/hisilicon.txt | 30 ++++++-- >>> arch/arm/boot/dts/hi3620.dtsi | 38 ++++++++++ >>> arch/arm/mach-hi3xxx/Kconfig | 3 + >>> arch/arm/mach-hi3xxx/Makefile | 1 + >>> arch/arm/mach-hi3xxx/core.h | 11 +++ >>> arch/arm/mach-hi3xxx/hi3xxx.c | 34 +++++++++ >>> arch/arm/mach-hi3xxx/platsmp.c | 84 ++++++++++++++++++++++ >>> 7 files changed, 197 insertions(+), 4 deletions(-) >>> create mode 100644 arch/arm/mach-hi3xxx/core.h >>> create mode 100644 arch/arm/mach-hi3xxx/platsmp.c >>> >>> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt >>> index 3be60c8..8c7a465 100644 >>> --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt >>> +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt >>> @@ -1,10 +1,32 @@ >>> Hisilicon Platforms Device Tree Bindings >>> ---------------------------------------------------- >>> >>> -Hi3716 Development Board >>> -Required root node properties: >>> - - compatible = "hisilicon,hi3716-dkb"; >>> - >>> Hi4511 Board >>> Required root node properties: >>> - compatible = "hisilicon,hi3620-hi4511"; >>> + >>> +Hisilicon system controller >>> + >>> +Required properties: >>> +- compatible : "hisilicon,sysctrl" >>> +- reg : Register address and size >>> + >>> +Optional properties: >>> +- smp-offset : offset in sysctrl for notifying slave cpu booting >>> + cpu 1, reg; >>> + cpu 2, reg + 0x4; >>> + cpu 3, reg + 0x8; >>> + If reg value is not zero, cpun exit wfi and go >>> +- resume-offset : offset in sysctrl for notifying cpu0 when resume >>> +- reboot-offset : offset in sysctrl for system reboot >>> + >>> +Example: >>> + >>> + /* for Hi3620 */ >>> + sysctrl: system-controller@fc802000 { >>> + compatible = "hisilicon,sysctrl"; >>> + reg = <0xfc802000 0x1000>; >>> + smp-offset = <0x31c>; >>> + resume-offset = <0x308>; >>> + reboot-offset = <0x4>; >>> + }; >>> diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi >>> index b9d8679..e311937 100644 >>> --- a/arch/arm/boot/dts/hi3620.dtsi >>> +++ b/arch/arm/boot/dts/hi3620.dtsi >>> @@ -39,6 +39,27 @@ >>> reg = <0x0>; >>> next-level-cache = <&L2>; >>> }; >>> + >>> + cpu@1 { >>> + compatible = "arm,cortex-a9"; >>> + device_type = "cpu"; >>> + reg = <1>; >>> + next-level-cache = <&L2>; >>> + }; >>> + >>> + cpu@2 { >>> + compatible = "arm,cortex-a9"; >>> + device_type = "cpu"; >>> + reg = <2>; >>> + next-level-cache = <&L2>; >>> + }; >>> + >>> + cpu@3 { >>> + compatible = "arm,cortex-a9"; >>> + device_type = "cpu"; >>> + reg = <3>; >>> + next-level-cache = <&L2>; >>> + }; >>> }; >>> >>> amba { >>> @@ -65,6 +86,17 @@ >>> reg = <0x1000 0x1000>, <0x100 0x100>; >>> }; >>> >>> + sysctrl: system-controller@802000 { >>> + compatible = "hisilicon,sysctrl"; >>> + reg = <0x802000 0x1000>; >>> + #address-cells = <1>; >>> + #size-cells = <0>; >>> + >>> + smp-offset = <0x31c>; >>> + resume-offset = <0x308>; >>> + reboot-offset = <0x4>; >>> + }; >>> + >>> dual_timer0: dual_timer@800000 { >>> compatible = "arm,sp804", "arm,primecell"; >>> reg = <0x800000 0x1000>; >>> @@ -115,6 +147,12 @@ >>> status = "disabled"; >>> }; >>> >>> + timer5: timer@600 { >>> + compatible = "arm,cortex-a9-twd-timer"; >>> + reg = <0x600 0x20>; >>> + interrupts = <1 13 0xf01>; >>> + }; >> Do you have a clocks node for this timer? > > As I mentioned in the 0th patch, clock binding are totally removed > in this patch. And clock driver will be append in another patch set. > >>> + >>> uart0: uart@b00000 { >>> compatible = "arm,pl011", "arm,primecell"; >>> reg = <0xb00000 0x1000>; >>> diff --git a/arch/arm/mach-hi3xxx/Kconfig b/arch/arm/mach-hi3xxx/Kconfig >>> index 68bd26c..d0f298a 100644 >>> --- a/arch/arm/mach-hi3xxx/Kconfig >>> +++ b/arch/arm/mach-hi3xxx/Kconfig >>> @@ -6,6 +6,9 @@ config ARCH_HI3xxx >>> select CACHE_L2X0 >>> select CLKSRC_OF >>> select GENERIC_CLOCKEVENTS >>> + select HAVE_ARM_SCU >>> + select HAVE_ARM_TWD >> Need "if SMP" to avoid a build failure for a non-smp kernel. >> > > ARCH_HI3xxx always need SMP configuration. HAVE_SMP is already > required. So it's impossible to build a non-smp kernel with this kernel > configuration. Then you need to have appropriate dependencies in Kconfig. Right now, someone can do: make hi3xxx_defconfig edit .config, disable CONFIG_SMP make and get errors both from Kconfig: warning: (ARCH_HI3xxx && SOC_OMAP5 && ARCH_SHMOBILE_MULTI) selects HAVE_ARM_TWD which has unmet direct dependencies (SMP) and from the make: arch/arm/kernel/smp_twd.c: In function 'twd_local_timer_of_register': arch/arm/kernel/smp_twd.c:391:20: error: 'setup_max_cpus' undeclared (first use in this function) if (!is_smp() || !setup_max_cpus) ... etc. I.e. omap and shmobile have similar issues but we'll sort them out in separate patches. You should still fix the hisilicon one. >>> /* >>> * This table is only for optimization. Since ioremap() could always share >>> * the same mapping if it's defined as static IO mapping. >>> @@ -29,6 +34,7 @@ >>> */ >>> static struct map_desc hi3620_io_desc[] __initdata = { >>> { >>> + /* sysctrl */ >> What's this comment for? >>> .pfn = __phys_to_pfn(0xfc802000), >>> .virtual = 0xfe802000, >>> .length = 0x1000, >>> @@ -48,6 +54,32 @@ static void __init hi3xxx_timer_init(void) >>> clocksource_of_init(); >>> } I know the code was added in a different patch, but I don't like the lack of using constants here. >>> +static void hi3xxx_restart(enum reboot_mode mode, const char *cmd) >>> +{ >>> + struct device_node *np; >>> + void __iomem *base; >>> + int offset; >>> + >>> + np = of_find_compatible_node(NULL, NULL, "hisilicon,sysctrl"); >>> + if (!np) { >>> + pr_err("failed to find hisilicon,sysctrl node\n"); >>> + return; >>> + } >>> + base = of_iomap(np, 0); You can't do this ioremap at restart time, since you can't rely on things being up enough for that when you're panicking, for example. Please set up the ioremap beforehand so you can just do the writel_relaxed, etc. >>> diff --git a/arch/arm/mach-hi3xxx/platsmp.c b/arch/arm/mach-hi3xxx/platsmp.c >>> new file mode 100644 >>> index 0000000..a4d04c0 >>> --- /dev/null >>> +++ b/arch/arm/mach-hi3xxx/platsmp.c >>> @@ -0,0 +1,84 @@ >>> +/* >>> + * Copyright (c) 2013 Linaro Ltd. >>> + * Copyright (c) 2013 Hisilicon Limited. >>> + * Based on platsmp.c, Copyright (C) 2002 ARM Ltd. Based on what platsmp? There are a lot of them under arch/arm. :) -Olof -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 17+ messages in thread
[parent not found: <CAOesGMiL_Ev647aVTDnwLVM7b_uOA3Qwd6TUXaOTC5b9H2w02w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* Re: [PATCH v11 5/6] ARM: hi3xxx: add smp support [not found] ` <CAOesGMiL_Ev647aVTDnwLVM7b_uOA3Qwd6TUXaOTC5b9H2w02w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> @ 2013-11-25 4:57 ` Haojian Zhuang 0 siblings, 0 replies; 17+ messages in thread From: Haojian Zhuang @ 2013-11-25 4:57 UTC (permalink / raw) To: Olof Johansson Cc: Dinh Nguyen, Arnd Bergmann, Russell King - ARM Linux, Linus Walleij, Rob Herring, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org, Mike Turquette, Grant Likely, Kevin Hilman, Stephen Warren, Shaojie Sun, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Patch Tracking, Zhangfei Gao On 25 November 2013 12:00, Olof Johansson <olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org> wrote: > On Tue, Nov 12, 2013 at 12:49 AM, Haojian Zhuang > <haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> wrote: >> On 7 November 2013 18:30, Dinh Nguyen <dinh.linux-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote: >>> >>> On 11/7/13 2:41 AM, Haojian Zhuang wrote: >>>> From: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >>>> >>>> Enable SMP support on hi3xxx platform >>>> >>>> Signed-off-by: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >>>> Tested-by: Zhang Mingjun <zhang.mingjun-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >>>> Tested-by: Li Xin <li.xin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >>>> Signed-off-by: Haojian Zhuang <haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >>>> --- >>>> .../bindings/arm/hisilicon/hisilicon.txt | 30 ++++++-- >>>> arch/arm/boot/dts/hi3620.dtsi | 38 ++++++++++ >>>> arch/arm/mach-hi3xxx/Kconfig | 3 + >>>> arch/arm/mach-hi3xxx/Makefile | 1 + >>>> arch/arm/mach-hi3xxx/core.h | 11 +++ >>>> arch/arm/mach-hi3xxx/hi3xxx.c | 34 +++++++++ >>>> arch/arm/mach-hi3xxx/platsmp.c | 84 ++++++++++++++++++++++ >>>> 7 files changed, 197 insertions(+), 4 deletions(-) >>>> create mode 100644 arch/arm/mach-hi3xxx/core.h >>>> create mode 100644 arch/arm/mach-hi3xxx/platsmp.c >>>> >>>> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt >>>> index 3be60c8..8c7a465 100644 >>>> --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt >>>> +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt >>>> @@ -1,10 +1,32 @@ >>>> Hisilicon Platforms Device Tree Bindings >>>> ---------------------------------------------------- >>>> >>>> -Hi3716 Development Board >>>> -Required root node properties: >>>> - - compatible = "hisilicon,hi3716-dkb"; >>>> - >>>> Hi4511 Board >>>> Required root node properties: >>>> - compatible = "hisilicon,hi3620-hi4511"; >>>> + >>>> +Hisilicon system controller >>>> + >>>> +Required properties: >>>> +- compatible : "hisilicon,sysctrl" >>>> +- reg : Register address and size >>>> + >>>> +Optional properties: >>>> +- smp-offset : offset in sysctrl for notifying slave cpu booting >>>> + cpu 1, reg; >>>> + cpu 2, reg + 0x4; >>>> + cpu 3, reg + 0x8; >>>> + If reg value is not zero, cpun exit wfi and go >>>> +- resume-offset : offset in sysctrl for notifying cpu0 when resume >>>> +- reboot-offset : offset in sysctrl for system reboot >>>> + >>>> +Example: >>>> + >>>> + /* for Hi3620 */ >>>> + sysctrl: system-controller@fc802000 { >>>> + compatible = "hisilicon,sysctrl"; >>>> + reg = <0xfc802000 0x1000>; >>>> + smp-offset = <0x31c>; >>>> + resume-offset = <0x308>; >>>> + reboot-offset = <0x4>; >>>> + }; >>>> diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi >>>> index b9d8679..e311937 100644 >>>> --- a/arch/arm/boot/dts/hi3620.dtsi >>>> +++ b/arch/arm/boot/dts/hi3620.dtsi >>>> @@ -39,6 +39,27 @@ >>>> reg = <0x0>; >>>> next-level-cache = <&L2>; >>>> }; >>>> + >>>> + cpu@1 { >>>> + compatible = "arm,cortex-a9"; >>>> + device_type = "cpu"; >>>> + reg = <1>; >>>> + next-level-cache = <&L2>; >>>> + }; >>>> + >>>> + cpu@2 { >>>> + compatible = "arm,cortex-a9"; >>>> + device_type = "cpu"; >>>> + reg = <2>; >>>> + next-level-cache = <&L2>; >>>> + }; >>>> + >>>> + cpu@3 { >>>> + compatible = "arm,cortex-a9"; >>>> + device_type = "cpu"; >>>> + reg = <3>; >>>> + next-level-cache = <&L2>; >>>> + }; >>>> }; >>>> >>>> amba { >>>> @@ -65,6 +86,17 @@ >>>> reg = <0x1000 0x1000>, <0x100 0x100>; >>>> }; >>>> >>>> + sysctrl: system-controller@802000 { >>>> + compatible = "hisilicon,sysctrl"; >>>> + reg = <0x802000 0x1000>; >>>> + #address-cells = <1>; >>>> + #size-cells = <0>; >>>> + >>>> + smp-offset = <0x31c>; >>>> + resume-offset = <0x308>; >>>> + reboot-offset = <0x4>; >>>> + }; >>>> + >>>> dual_timer0: dual_timer@800000 { >>>> compatible = "arm,sp804", "arm,primecell"; >>>> reg = <0x800000 0x1000>; >>>> @@ -115,6 +147,12 @@ >>>> status = "disabled"; >>>> }; >>>> >>>> + timer5: timer@600 { >>>> + compatible = "arm,cortex-a9-twd-timer"; >>>> + reg = <0x600 0x20>; >>>> + interrupts = <1 13 0xf01>; >>>> + }; >>> Do you have a clocks node for this timer? >> >> As I mentioned in the 0th patch, clock binding are totally removed >> in this patch. And clock driver will be append in another patch set. >> >>>> + >>>> uart0: uart@b00000 { >>>> compatible = "arm,pl011", "arm,primecell"; >>>> reg = <0xb00000 0x1000>; >>>> diff --git a/arch/arm/mach-hi3xxx/Kconfig b/arch/arm/mach-hi3xxx/Kconfig >>>> index 68bd26c..d0f298a 100644 >>>> --- a/arch/arm/mach-hi3xxx/Kconfig >>>> +++ b/arch/arm/mach-hi3xxx/Kconfig >>>> @@ -6,6 +6,9 @@ config ARCH_HI3xxx >>>> select CACHE_L2X0 >>>> select CLKSRC_OF >>>> select GENERIC_CLOCKEVENTS >>>> + select HAVE_ARM_SCU >>>> + select HAVE_ARM_TWD >>> Need "if SMP" to avoid a build failure for a non-smp kernel. >>> >> >> ARCH_HI3xxx always need SMP configuration. HAVE_SMP is already >> required. So it's impossible to build a non-smp kernel with this kernel >> configuration. > > Then you need to have appropriate dependencies in Kconfig. > > Right now, someone can do: > > make hi3xxx_defconfig > edit .config, disable CONFIG_SMP > make > > and get errors both from Kconfig: > > warning: (ARCH_HI3xxx && SOC_OMAP5 && ARCH_SHMOBILE_MULTI) selects > HAVE_ARM_TWD which has unmet direct dependencies (SMP) > > and from the make: > > arch/arm/kernel/smp_twd.c: In function 'twd_local_timer_of_register': > arch/arm/kernel/smp_twd.c:391:20: error: 'setup_max_cpus' undeclared > (first use in this function) > if (!is_smp() || !setup_max_cpus) > > ... etc. > OK. I'll update the Kconfig. > I.e. omap and shmobile have similar issues but we'll sort them out in > separate patches. You should still fix the hisilicon one. > >>>> /* >>>> * This table is only for optimization. Since ioremap() could always share >>>> * the same mapping if it's defined as static IO mapping. >>>> @@ -29,6 +34,7 @@ >>>> */ >>>> static struct map_desc hi3620_io_desc[] __initdata = { >>>> { >>>> + /* sysctrl */ >>> What's this comment for? >>>> .pfn = __phys_to_pfn(0xfc802000), >>>> .virtual = 0xfe802000, >>>> .length = 0x1000, >>>> @@ -48,6 +54,32 @@ static void __init hi3xxx_timer_init(void) >>>> clocksource_of_init(); >>>> } > > I know the code was added in a different patch, but I don't like the > lack of using constants here. > > OK. I'll use macro instead. > >>>> +static void hi3xxx_restart(enum reboot_mode mode, const char *cmd) >>>> +{ >>>> + struct device_node *np; >>>> + void __iomem *base; >>>> + int offset; >>>> + >>>> + np = of_find_compatible_node(NULL, NULL, "hisilicon,sysctrl"); >>>> + if (!np) { >>>> + pr_err("failed to find hisilicon,sysctrl node\n"); >>>> + return; >>>> + } >>>> + base = of_iomap(np, 0); > > > You can't do this ioremap at restart time, since you can't rely on > things being up enough for that when you're panicking, for example. > Please set up the ioremap beforehand so you can just do the > writel_relaxed, etc. > Since the sysctrl register mapping is already defined, the ioremap will reuse the static mapping instead. It won't add the new mapping in page table & flush cache. > >>>> diff --git a/arch/arm/mach-hi3xxx/platsmp.c b/arch/arm/mach-hi3xxx/platsmp.c >>>> new file mode 100644 >>>> index 0000000..a4d04c0 >>>> --- /dev/null >>>> +++ b/arch/arm/mach-hi3xxx/platsmp.c >>>> @@ -0,0 +1,84 @@ >>>> +/* >>>> + * Copyright (c) 2013 Linaro Ltd. >>>> + * Copyright (c) 2013 Hisilicon Limited. >>>> + * Based on platsmp.c, Copyright (C) 2002 ARM Ltd. > > Based on what platsmp? There are a lot of them under arch/arm. :) > OK. I'll add more comments. > > -Olof -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v11 5/6] ARM: hi3xxx: add smp support [not found] ` <1383813691-31587-6-git-send-email-haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> 2013-11-07 10:30 ` Dinh Nguyen @ 2013-11-12 22:53 ` Kevin Hilman [not found] ` <8738n1nses.fsf-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> 1 sibling, 1 reply; 17+ messages in thread From: Kevin Hilman @ 2013-11-12 22:53 UTC (permalink / raw) To: Haojian Zhuang Cc: arnd-r2nGTMty4D4, linux-lFZ/pmaqli7XmaaqVzeoHQ, linus.walleij-QSEj5FYQhm4dnm+yROfE0A, olof-nZhT3qVonbNeoWH0uzbU5w, rob.herring-bsGFqQB8/DxBDgjK7y7TUQ, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, tglx-hfZtesqFncYOwBW4kG4KsQ, mturquette-QSEj5FYQhm4dnm+yROfE0A, grant.likely-QSEj5FYQhm4dnm+yROfE0A, swarren-3lzwWm7+Weoh9ZMKESR00Q, shaojie.sun-QSEj5FYQhm4dnm+yROfE0A, devicetree-u79uwXL29TY76Z2rM5mHXA, patches-QSEj5FYQhm4dnm+yROfE0A, Zhangfei Gao Haojian Zhuang <haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> writes: > From: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> > > Enable SMP support on hi3xxx platform > > Signed-off-by: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> > Tested-by: Zhang Mingjun <zhang.mingjun-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> > Tested-by: Li Xin <li.xin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> > Signed-off-by: Haojian Zhuang <haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> > --- > .../bindings/arm/hisilicon/hisilicon.txt | 30 ++++++-- > arch/arm/boot/dts/hi3620.dtsi | 38 ++++++++++ > arch/arm/mach-hi3xxx/Kconfig | 3 + > arch/arm/mach-hi3xxx/Makefile | 1 + > arch/arm/mach-hi3xxx/core.h | 11 +++ > arch/arm/mach-hi3xxx/hi3xxx.c | 34 +++++++++ > arch/arm/mach-hi3xxx/platsmp.c | 84 ++++++++++++++++++++++ > 7 files changed, 197 insertions(+), 4 deletions(-) > create mode 100644 arch/arm/mach-hi3xxx/core.h > create mode 100644 arch/arm/mach-hi3xxx/platsmp.c > > diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt > index 3be60c8..8c7a465 100644 > --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt > +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt > @@ -1,10 +1,32 @@ > Hisilicon Platforms Device Tree Bindings > ---------------------------------------------------- > > -Hi3716 Development Board > -Required root node properties: > - - compatible = "hisilicon,hi3716-dkb"; > - This was added in patch 1/6, then removed here. If it's not needed/used, just drop it from patch 1 please. Kevin -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 17+ messages in thread
[parent not found: <8738n1nses.fsf-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>]
* Re: [PATCH v11 5/6] ARM: hi3xxx: add smp support [not found] ` <8738n1nses.fsf-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> @ 2013-11-12 23:40 ` Haojian Zhuang 0 siblings, 0 replies; 17+ messages in thread From: Haojian Zhuang @ 2013-11-12 23:40 UTC (permalink / raw) To: Kevin Hilman Cc: arnd-r2nGTMty4D4, linux-lFZ/pmaqli7XmaaqVzeoHQ, linus.walleij-QSEj5FYQhm4dnm+yROfE0A, olof-nZhT3qVonbNeoWH0uzbU5w, rob.herring-bsGFqQB8/DxBDgjK7y7TUQ, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, tglx-hfZtesqFncYOwBW4kG4KsQ, mturquette-QSEj5FYQhm4dnm+yROfE0A, grant.likely-QSEj5FYQhm4dnm+yROfE0A, swarren-3lzwWm7+Weoh9ZMKESR00Q, shaojie.sun-QSEj5FYQhm4dnm+yROfE0A, devicetree-u79uwXL29TY76Z2rM5mHXA, patches-QSEj5FYQhm4dnm+yROfE0A, Zhangfei Gao On 11/13/2013 06:53 AM, Kevin Hilman wrote: > Haojian Zhuang <haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> writes: > >> From: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >> >> Enable SMP support on hi3xxx platform >> >> Signed-off-by: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >> Tested-by: Zhang Mingjun <zhang.mingjun-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >> Tested-by: Li Xin <li.xin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >> Signed-off-by: Haojian Zhuang <haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> >> --- >> .../bindings/arm/hisilicon/hisilicon.txt | 30 ++++++-- >> arch/arm/boot/dts/hi3620.dtsi | 38 ++++++++++ >> arch/arm/mach-hi3xxx/Kconfig | 3 + >> arch/arm/mach-hi3xxx/Makefile | 1 + >> arch/arm/mach-hi3xxx/core.h | 11 +++ >> arch/arm/mach-hi3xxx/hi3xxx.c | 34 +++++++++ >> arch/arm/mach-hi3xxx/platsmp.c | 84 ++++++++++++++++++++++ >> 7 files changed, 197 insertions(+), 4 deletions(-) >> create mode 100644 arch/arm/mach-hi3xxx/core.h >> create mode 100644 arch/arm/mach-hi3xxx/platsmp.c >> >> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt >> index 3be60c8..8c7a465 100644 >> --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt >> +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt >> @@ -1,10 +1,32 @@ >> Hisilicon Platforms Device Tree Bindings >> ---------------------------------------------------- >> >> -Hi3716 Development Board >> -Required root node properties: >> - - compatible = "hisilicon,hi3716-dkb"; >> - > This was added in patch 1/6, then removed here. If it's not > needed/used, just drop it from patch 1 please. > > Kevin OK -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v11 6/6] ARM: hi3xxx: add hotplug support [not found] ` <1383813691-31587-1-git-send-email-haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> ` (4 preceding siblings ...) 2013-11-07 8:41 ` [PATCH v11 5/6] ARM: hi3xxx: add smp support Haojian Zhuang @ 2013-11-07 8:41 ` Haojian Zhuang 5 siblings, 0 replies; 17+ messages in thread From: Haojian Zhuang @ 2013-11-07 8:41 UTC (permalink / raw) To: arnd-r2nGTMty4D4, linux-lFZ/pmaqli7XmaaqVzeoHQ, linus.walleij-QSEj5FYQhm4dnm+yROfE0A, olof-nZhT3qVonbNeoWH0uzbU5w, rob.herring-bsGFqQB8/DxBDgjK7y7TUQ, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, tglx-hfZtesqFncYOwBW4kG4KsQ, mturquette-QSEj5FYQhm4dnm+yROfE0A, grant.likely-QSEj5FYQhm4dnm+yROfE0A, khilman-QSEj5FYQhm4dnm+yROfE0A, swarren-3lzwWm7+Weoh9ZMKESR00Q, shaojie.sun-QSEj5FYQhm4dnm+yROfE0A, devicetree-u79uwXL29TY76Z2rM5mHXA Cc: patches-QSEj5FYQhm4dnm+yROfE0A, Zhangfei Gao, Haojian Zhuang From: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> Enable hotplug support on hi3xxx platform How to test: cat proc/interrupts echo 0 > /sys/devices/system/cpu/cpuX/online cat proc/interrupts echo 1 > /sys/devices/system/cpu/cpuX/online Signed-off-by: Zhangfei Gao <zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> Tested-by: Zhang Mingjun <zhang.mingjun-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> Signed-off-by: Haojian Zhuang <haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> --- arch/arm/mach-hi3xxx/Makefile | 1 + arch/arm/mach-hi3xxx/core.h | 4 + arch/arm/mach-hi3xxx/hotplug.c | 200 +++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-hi3xxx/platsmp.c | 5 ++ 4 files changed, 210 insertions(+) create mode 100644 arch/arm/mach-hi3xxx/hotplug.c diff --git a/arch/arm/mach-hi3xxx/Makefile b/arch/arm/mach-hi3xxx/Makefile index 7a869a7..c9919e8 100644 --- a/arch/arm/mach-hi3xxx/Makefile +++ b/arch/arm/mach-hi3xxx/Makefile @@ -4,3 +4,4 @@ obj-y += hi3xxx.o obj-$(CONFIG_SMP) += platsmp.o +obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-hi3xxx/core.h b/arch/arm/mach-hi3xxx/core.h index 226f020..af23ec2 100644 --- a/arch/arm/mach-hi3xxx/core.h +++ b/arch/arm/mach-hi3xxx/core.h @@ -8,4 +8,8 @@ extern int hi3xxx_get_cpu_jump(int cpu); extern void secondary_startup(void); extern struct smp_operations hi3xxx_smp_ops; +extern void hi3xxx_cpu_die(unsigned int cpu); +extern int hi3xxx_cpu_kill(unsigned int cpu); +extern void hi3xxx_set_cpu(int cpu, bool enable); + #endif diff --git a/arch/arm/mach-hi3xxx/hotplug.c b/arch/arm/mach-hi3xxx/hotplug.c new file mode 100644 index 0000000..5dc949e --- /dev/null +++ b/arch/arm/mach-hi3xxx/hotplug.c @@ -0,0 +1,200 @@ +/* + * Copyright (c) 2013 Linaro Ltd. + * Copyright (c) 2013 Hisilicon Limited. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ + +#include <linux/cpu.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <asm/cacheflush.h> +#include <asm/smp_plat.h> +#include "core.h" + +/* Sysctrl registers in Hi3620 SoC */ +#define SCISOEN 0xc0 +#define SCISODIS 0xc4 +#define SCPERPWREN 0xd0 +#define SCPERPWRDIS 0xd4 +#define SCCPUCOREEN 0xf4 +#define SCCPUCOREDIS 0xf8 +#define SCPERCTRL0 0x200 +#define SCCPURSTEN 0x410 +#define SCCPURSTDIS 0x414 + +/* + * bit definition in SCISOEN/SCPERPWREN/... + * + * CPU2_ISO_CTRL (1 << 5) + * CPU3_ISO_CTRL (1 << 6) + * ... + */ +#define CPU2_ISO_CTRL (1 << 5) + +/* + * bit definition in SCPERCTRL0 + * + * CPU0_WFI_MASK_CFG (1 << 28) + * CPU1_WFI_MASK_CFG (1 << 29) + * ... + */ +#define CPU0_WFI_MASK_CFG (1 << 28) + +/* + * bit definition in SCCPURSTEN/... + * + * CPU0_SRST_REQ_EN (1 << 0) + * CPU1_SRST_REQ_EN (1 << 1) + * ... + */ +#define CPU0_HPM_SRST_REQ_EN (1 << 22) +#define CPU0_DBG_SRST_REQ_EN (1 << 12) +#define CPU0_NEON_SRST_REQ_EN (1 << 4) +#define CPU0_SRST_REQ_EN (1 << 0) + +enum { + HI3620_CTRL, + ERROR_CTRL, +}; + +static void __iomem *ctrl_base = NULL; +static int id; + +static void set_cpu_hi3620(int cpu, bool enable) +{ + u32 val = 0; + + if (enable) { + /* MTCMOS set */ + if ((cpu == 2) || (cpu == 3)) + writel_relaxed(CPU2_ISO_CTRL << (cpu - 2), + ctrl_base + SCPERPWREN); + udelay(100); + + /* Enable core */ + writel_relaxed(0x01 << cpu, ctrl_base + SCCPUCOREEN); + + /* unreset */ + val = CPU0_DBG_SRST_REQ_EN | CPU0_NEON_SRST_REQ_EN + | CPU0_SRST_REQ_EN; + writel_relaxed(val << cpu, ctrl_base + SCCPURSTDIS); + /* reset */ + val |= CPU0_HPM_SRST_REQ_EN; + writel_relaxed(val << cpu, ctrl_base + SCCPURSTEN); + + /* ISO disable */ + if ((cpu == 2) || (cpu == 3)) + writel_relaxed(CPU2_ISO_CTRL << (cpu - 2), + ctrl_base + SCISODIS); + udelay(1); + + /* WFI Mask */ + val = readl_relaxed(ctrl_base + SCPERCTRL0); + val &= ~(CPU0_WFI_MASK_CFG << cpu); + writel_relaxed(val, ctrl_base + SCPERCTRL0); + + /* Unreset */ + val = CPU0_DBG_SRST_REQ_EN | CPU0_NEON_SRST_REQ_EN + | CPU0_SRST_REQ_EN | CPU0_HPM_SRST_REQ_EN; + writel_relaxed(val << cpu, ctrl_base + SCCPURSTDIS); + } else { + /* wfi mask */ + val = readl_relaxed(ctrl_base + SCPERCTRL0); + val |= (CPU0_WFI_MASK_CFG << cpu); + writel_relaxed(val, ctrl_base + SCPERCTRL0); + + /* disable core*/ + writel_relaxed(0x01 << cpu, ctrl_base + SCCPUCOREDIS); + + if ((cpu == 2) || (cpu == 3)) { + /* iso enable */ + writel_relaxed(CPU2_ISO_CTRL << (cpu - 2), + ctrl_base + SCISOEN); + udelay(1); + } + + /* reset */ + val = CPU0_DBG_SRST_REQ_EN | CPU0_NEON_SRST_REQ_EN + | CPU0_SRST_REQ_EN | CPU0_HPM_SRST_REQ_EN; + writel_relaxed(val << cpu, ctrl_base + SCCPURSTEN); + + if ((cpu == 2) || (cpu == 3)) { + /* MTCMOS unset */ + writel_relaxed(CPU2_ISO_CTRL << (cpu - 2), + ctrl_base + SCPERPWRDIS); + udelay(100); + } + } +} + +static int hi3xxx_hotplug_init(void) +{ + struct device_node *node; + + node = of_find_compatible_node(NULL, NULL, "hisilicon,sysctrl"); + if (node) { + ctrl_base = of_iomap(node, 0); + id = HI3620_CTRL; + return 0; + } + id = ERROR_CTRL; + return -ENOENT; +} + +void hi3xxx_set_cpu(int cpu, bool enable) +{ + if (!ctrl_base) { + if (hi3xxx_hotplug_init() < 0) + return; + } + + if (id == HI3620_CTRL) + set_cpu_hi3620(cpu, enable); +} + +static inline void cpu_enter_lowpower(void) +{ + unsigned int v; + + flush_cache_all(); + + /* + * Turn off coherency and L1 D-cache + */ + asm volatile( + " mrc p15, 0, %0, c1, c0, 1\n" + " bic %0, %0, #0x40\n" + " mcr p15, 0, %0, c1, c0, 1\n" + " mrc p15, 0, %0, c1, c0, 0\n" + " bic %0, %0, #0x04\n" + " mcr p15, 0, %0, c1, c0, 0\n" + : "=&r" (v) + : "r" (0) + : "cc"); +} + +void hi3xxx_cpu_die(unsigned int cpu) +{ + cpu_enter_lowpower(); + hi3xxx_set_cpu_jump(cpu, phys_to_virt(0)); + cpu_do_idle(); + + /* We should have never returned from idle */ + panic("cpu %d unexpectedly exit from shutdown\n", cpu); +} + +int hi3xxx_cpu_kill(unsigned int cpu) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(50); + + while (hi3xxx_get_cpu_jump(cpu)) + if (time_after(jiffies, timeout)) + return 0; + hi3xxx_set_cpu(cpu, false); + return 1; +} diff --git a/arch/arm/mach-hi3xxx/platsmp.c b/arch/arm/mach-hi3xxx/platsmp.c index a4d04c0..4357758 100644 --- a/arch/arm/mach-hi3xxx/platsmp.c +++ b/arch/arm/mach-hi3xxx/platsmp.c @@ -73,6 +73,7 @@ static void __init hi3xxx_smp_prepare_cpus(unsigned int max_cpus) static int hi3xxx_boot_secondary(unsigned int cpu, struct task_struct *idle) { + hi3xxx_set_cpu(cpu, true); hi3xxx_set_cpu_jump(cpu, secondary_startup); arch_send_wakeup_ipi_mask(cpumask_of(cpu)); return 0; @@ -81,4 +82,8 @@ static int hi3xxx_boot_secondary(unsigned int cpu, struct task_struct *idle) struct smp_operations hi3xxx_smp_ops __initdata = { .smp_prepare_cpus = hi3xxx_smp_prepare_cpus, .smp_boot_secondary = hi3xxx_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = hi3xxx_cpu_die, + .cpu_kill = hi3xxx_cpu_kill, +#endif }; -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 17+ messages in thread
end of thread, other threads:[~2013-11-25 4:57 UTC | newest]
Thread overview: 17+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-11-07 8:41 [PATCH v11 0/6] enable hi3xxx SoC Haojian Zhuang
[not found] ` <1383813691-31587-1-git-send-email-haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2013-11-07 8:41 ` [PATCH v11 1/6] ARM: hi3xxx: add board support with device tree Haojian Zhuang
[not found] ` <1383813691-31587-2-git-send-email-haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2013-11-07 9:50 ` Dinh Nguyen
[not found] ` <527B6266.9020107-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-11-12 8:42 ` Haojian Zhuang
2013-11-07 8:41 ` [PATCH v11 2/6] ARM: dts: enable hi4511 " Haojian Zhuang
2013-11-07 8:41 ` [PATCH v11 3/6] ARM: config: enable hi3xxx in multi_v7_defconfig Haojian Zhuang
2013-11-07 8:41 ` [PATCH v11 4/6] ARM: config: add defconfig for Hi3xxx Haojian Zhuang
2013-11-07 8:41 ` [PATCH v11 5/6] ARM: hi3xxx: add smp support Haojian Zhuang
[not found] ` <1383813691-31587-6-git-send-email-haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2013-11-07 10:30 ` Dinh Nguyen
[not found] ` <527B6BCA.2010606-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-11-12 8:49 ` Haojian Zhuang
[not found] ` <CAD6h2NRTc42YAKr6zLdMpiYbpBLatA9HNpZeFa3pZZpvJXBuCg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-11-12 23:00 ` Kevin Hilman
[not found] ` <87txfhmdi3.fsf-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2013-11-12 23:39 ` Haojian Zhuang
2013-11-25 4:00 ` Olof Johansson
[not found] ` <CAOesGMiL_Ev647aVTDnwLVM7b_uOA3Qwd6TUXaOTC5b9H2w02w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-11-25 4:57 ` Haojian Zhuang
2013-11-12 22:53 ` Kevin Hilman
[not found] ` <8738n1nses.fsf-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2013-11-12 23:40 ` Haojian Zhuang
2013-11-07 8:41 ` [PATCH v11 6/6] ARM: hi3xxx: add hotplug support Haojian Zhuang
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).