From: Daniel Lezcano <daniel.lezcano-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: Linus Walleij
<linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Thomas Gleixner <tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH 2/2] clksrc: delete nomadik MTU non-DT boot path
Date: Tue, 19 Nov 2013 23:44:17 +0100 [thread overview]
Message-ID: <528BE9C1.8000409@linaro.org> (raw)
In-Reply-To: <1384896499-9428-1-git-send-email-linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
On 11/19/2013 10:28 PM, Linus Walleij wrote:
> Both platforms using the MTU (Nomadik and Ux500) have now been
> converted to use device tree exclusively, thus let us delete
> this platform data header and make this driver a fully
> self-contained DT-only driver.
>
> Cc: Daniel Lezcano <daniel.lezcano-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Cc: Thomas Gleixner <tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
> Cc: Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Signed-off-by: Linus Walleij <linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Acked-by: Daniel Lezcano <daniel.lezcano-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
A sidenote: there is a comment in arch/arm/mach-ux500/timer.c
"/* TODO: Once MTU has been DT:ed place code above into else. */"
but I did not see any changes related to this TODO.
> ---
> Daniel/tglx: seeking an ACK from either of you guys to take this
> in the ux500-devicetree branch where the last user is deleted.
> ---
> drivers/clocksource/nomadik-mtu.c | 23 +++++-----------------
> .../linux/platform_data/clocksource-nomadik-mtu.h | 9 ---------
> 2 files changed, 5 insertions(+), 27 deletions(-)
> delete mode 100644 include/linux/platform_data/clocksource-nomadik-mtu.h
>
> diff --git a/drivers/clocksource/nomadik-mtu.c b/drivers/clocksource/nomadik-mtu.c
> index ed7b73b508e0..f00b5c9ce8b6 100644
> --- a/drivers/clocksource/nomadik-mtu.c
> +++ b/drivers/clocksource/nomadik-mtu.c
> @@ -20,7 +20,6 @@
> #include <linux/jiffies.h>
> #include <linux/delay.h>
> #include <linux/err.h>
> -#include <linux/platform_data/clocksource-nomadik-mtu.h>
> #include <linux/sched_clock.h>
> #include <asm/mach/time.h>
>
> @@ -103,7 +102,7 @@ static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev)
> return 0;
> }
>
> -void nmdk_clkevt_reset(void)
> +static void nmdk_clkevt_reset(void)
> {
> if (clkevt_periodic) {
> /* Timer: configure load and background-load, and fire it up */
> @@ -144,7 +143,7 @@ static void nmdk_clkevt_mode(enum clock_event_mode mode,
> }
> }
>
> -void nmdk_clksrc_reset(void)
> +static void nmdk_clksrc_reset(void)
> {
> /* Disable */
> writel(0, mtu_base + MTU_CR(0));
> @@ -192,8 +191,8 @@ static struct irqaction nmdk_timer_irq = {
> .dev_id = &nmdk_clkevt,
> };
>
> -static void __init __nmdk_timer_init(void __iomem *base, int irq,
> - struct clk *pclk, struct clk *clk)
> +static void __init nmdk_timer_init(void __iomem *base, int irq,
> + struct clk *pclk, struct clk *clk)
> {
> unsigned long rate;
>
> @@ -245,18 +244,6 @@ static void __init __nmdk_timer_init(void __iomem *base, int irq,
> register_current_timer_delay(&mtu_delay_timer);
> }
>
> -void __init nmdk_timer_init(void __iomem *base, int irq)
> -{
> - struct clk *clk0, *pclk0;
> -
> - pclk0 = clk_get_sys("mtu0", "apb_pclk");
> - BUG_ON(IS_ERR(pclk0));
> - clk0 = clk_get_sys("mtu0", NULL);
> - BUG_ON(IS_ERR(clk0));
> -
> - __nmdk_timer_init(base, irq, pclk0, clk0);
> -}
> -
> static void __init nmdk_timer_of_init(struct device_node *node)
> {
> struct clk *pclk;
> @@ -280,7 +267,7 @@ static void __init nmdk_timer_of_init(struct device_node *node)
> if (irq <= 0)
> panic("Can't parse IRQ");
>
> - __nmdk_timer_init(base, irq, pclk, clk);
> + nmdk_timer_init(base, irq, pclk, clk);
> }
> CLOCKSOURCE_OF_DECLARE(nomadik_mtu, "st,nomadik-mtu",
> nmdk_timer_of_init);
> diff --git a/include/linux/platform_data/clocksource-nomadik-mtu.h b/include/linux/platform_data/clocksource-nomadik-mtu.h
> deleted file mode 100644
> index 80088973b734..000000000000
> --- a/include/linux/platform_data/clocksource-nomadik-mtu.h
> +++ /dev/null
> @@ -1,9 +0,0 @@
> -#ifndef __PLAT_MTU_H
> -#define __PLAT_MTU_H
> -
> -void nmdk_timer_init(void __iomem *base, int irq);
> -void nmdk_clkevt_reset(void);
> -void nmdk_clksrc_reset(void);
> -
> -#endif /* __PLAT_MTU_H */
> -
>
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2013-11-19 22:44 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-19 21:28 [PATCH 2/2] clksrc: delete nomadik MTU non-DT boot path Linus Walleij
[not found] ` <1384896499-9428-1-git-send-email-linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2013-11-19 22:44 ` Daniel Lezcano [this message]
[not found] ` <528BE9C1.8000409-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2013-11-20 8:52 ` Lee Jones
2013-11-20 8:59 ` Daniel Lezcano
[not found] ` <528C79E5.2020209-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2013-11-20 9:01 ` Linus Walleij
[not found] ` <CACRpkdbZeHDj_jgcJ7QH_+mwQqP6ZaKqGNjP6j37txAeq2DnsQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-11-20 9:03 ` Daniel Lezcano
2013-11-20 8:56 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=528BE9C1.8000409@linaro.org \
--to=daniel.lezcano-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).