From mboxrd@z Thu Jan 1 00:00:00 1970 From: Milo Kim Subject: Re: [PATCH v4 0/4] LP3943 MFD driver for a GPIO expander and a PWM generator Date: Wed, 4 Dec 2013 08:27:44 +0900 Message-ID: <529E68F0.1090904@ti.com> References: <1380082975-6022-1-git-send-email-milo.kim@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1"; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1380082975-6022-1-git-send-email-milo.kim@ti.com> Sender: linux-pwm-owner@vger.kernel.org To: Lee Jones , Samuel Ortiz Cc: Milo Kim , Thierry Reding , linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-pwm@vger.kernel.org, Linus Walleij List-Id: devicetree@vger.kernel.org Hello Guys, Could you check this patchset? Driver documentation was moved from 'Documentation' to 'drivers/mfd/lp3943.c'. Thanks, Milo On 09/25/2013 01:22 PM, Milo Kim wrote: > LP3943 is an integrated device capable of driving 16 output channels. > It can be used for GPIO expander and PWM generators. > LP3493 registers are controlled via the I2C interface. > > This patch-set consists of four parts - MFD, GPIO, PWM and documents. > > Update from v3 to v4: > Move the driver description from the documentation to the MFD driver file. > > Milo Kim (4): > mfd: add LP3943 MFD driver > gpio: add LP3943 I2C GPIO expander driver > pwm: add LP3943 PWM driver > Documentation: add LP3943 DT bindings and document > > .../devicetree/bindings/gpio/gpio-lp3943.txt | 37 +++ > Documentation/devicetree/bindings/mfd/lp3943.txt | 33 ++ > .../devicetree/bindings/pwm/pwm-lp3943.txt | 58 ++++ > drivers/gpio/Kconfig | 8 + > drivers/gpio/Makefile | 1 + > drivers/gpio/gpio-lp3943.c | 242 +++++++++++++++ > drivers/mfd/Kconfig | 11 + > drivers/mfd/Makefile | 1 + > drivers/mfd/lp3943.c | 167 +++++++++++ > drivers/pwm/Kconfig | 10 + > drivers/pwm/Makefile | 1 + > drivers/pwm/pwm-lp3943.c | 314 ++++++++++++++++++++ > include/linux/mfd/lp3943.h | 114 +++++++ > 13 files changed, 997 insertions(+) > create mode 100644 Documentation/devicetree/bindings/gpio/gpio-lp3943.txt > create mode 100644 Documentation/devicetree/bindings/mfd/lp3943.txt > create mode 100644 Documentation/devicetree/bindings/pwm/pwm-lp3943.txt > create mode 100644 drivers/gpio/gpio-lp3943.c > create mode 100644 drivers/mfd/lp3943.c > create mode 100644 drivers/pwm/pwm-lp3943.c > create mode 100644 include/linux/mfd/lp3943.h >