From mboxrd@z Thu Jan 1 00:00:00 1970 From: Balaji T K Subject: Re: [PATCH v7 5/7] ARM: dts: add pbias dt node Date: Tue, 7 Jan 2014 17:53:43 +0530 Message-ID: <52CBF1CF.4040706@ti.com> References: <1387560955-6547-1-git-send-email-balajitk@ti.com> <1387560955-6547-6-git-send-email-balajitk@ti.com> <20140106181928.GK24664@e106331-lin.cambridge.arm.com> <52CBD467.6060909@ti.com> <20140107105738.GA4180@e106331-lin.cambridge.arm.com> Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1"; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20140107105738.GA4180@e106331-lin.cambridge.arm.com> Sender: linux-mmc-owner@vger.kernel.org To: Mark Rutland Cc: "linux-omap@vger.kernel.org" , "bcousson@baylibre.com" , "devicetree@vger.kernel.org" , "linux-mmc@vger.kernel.org" , "cjb@laptop.org" , "broonie@kernel.org" , "tony@atomide.com" List-Id: devicetree@vger.kernel.org On Tuesday 07 January 2014 04:27 PM, Mark Rutland wrote: > On Tue, Jan 07, 2014 at 10:18:15AM +0000, Balaji T K wrote: >> On Monday 06 January 2014 11:49 PM, Mark Rutland wrote: >>> On Fri, Dec 20, 2013 at 05:35:53PM +0000, Balaji T K wrote: >>>> Add pbias regulator node as a child of system control >>>> module - syscon. >>>> >>>> Signed-off-by: Balaji T K >>>> --- >>>> arch/arm/boot/dts/dra7.dtsi | 18 ++++++++++++++++++ >>>> arch/arm/boot/dts/omap2430.dtsi | 18 ++++++++++++++++++ >>>> arch/arm/boot/dts/omap3.dtsi | 18 ++++++++++++++++++ >>>> arch/arm/boot/dts/omap4.dtsi | 18 ++++++++++++++++++ >>>> arch/arm/boot/dts/omap5.dtsi | 18 ++++++++++++++++++ >>>> 5 files changed, 90 insertions(+), 0 deletions(-) >>>> >>>> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi >>>> index d0df4c4..4e68df1 100644 >>>> --- a/arch/arm/boot/dts/dra7.dtsi >>>> +++ b/arch/arm/boot/dts/dra7.dtsi >>>> @@ -110,6 +110,23 @@ >>>> ti,hwmods = "counter_32k"; >>>> }; >>>> >>>> + dra7_ctrl_general: tisyscon@4a002e00 { >>>> + compatible = "ti,control-syscon", "syscon", "simple-bus"; >>> >>> Please, don't use simple-bus like that. The components below this node >>> depend on it. It is _NOT_ a simple bus. Make the ti,control-syscon >>> driver probe it's children. >> >> Hi Mark, >> >> Actually ti,control-syscon driver does not exist, so I can remove it, >> and simple-bus is needed for child creation. > > This still shows up as a syscon node, with a reg property, and syscon is > not an extension of simple-bus. > > There are properties in the parent node that children depend on, and > that makes me wary of describing it as a simple bus. I'd expect to be > able to move child nodes out of a simple-bus if ranges provided an > idmap, and I can't do that here. > Hi Mark, Not sure if I am understanding here, can you please add more info. > Thanks, > Mark. > >> >>> >>>> + reg = <0x4a002e00 0x7c>; >>>> + #address-cells = <1>; >>>> + #size-cells = <1>; >>>> + ranges; >>>> + pbias_regulator: pbias_regulator { >>>> + compatible = "ti,pbias-omap"; >>>> + reg = <0 0x4>; >>>> + pbias_mmc_reg: pbias_mmc_omap5 { >>>> + regulator-name = "pbias_mmc_omap5"; >>>> + regulator-min-microvolt = <1800000>; >>>> + regulator-max-microvolt = <3000000>; >>>> + }; >>>> + }; >>>> + }; >>>> + >>> >>> Thanks, >>> Mark. >>> >>