From mboxrd@z Thu Jan 1 00:00:00 1970 From: Roger Quadros Subject: Re: [PATCH v4 0/5] USB Host support for OMAP5 uEVM (for 3.14) Date: Thu, 9 Jan 2014 16:38:04 +0530 Message-ID: <52CE8314.2000000@ti.com> References: <1389161742-10533-1-git-send-email-rogerq@ti.com> <52CE824D.2090905@virtualopensystems.com> Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <52CE824D.2090905-lrHrjnjw1UfHK3s98zE1ajGjJy/sRE9J@public.gmane.org> Sender: linux-usb-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Michele Paolino Cc: linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org Hi Michele, Did you enable CONFIG_USB_EHCI_HCD_OMAP in the kernel config? It is not enabled by default in omap2plus_defconfig. cheers, -roger On 01/09/2014 04:34 PM, Michele Paolino wrote: > Hello Roger, > > I'm testing your patch on an OMAP5430 EVM board. The ethernet is not working in my case. The kernel I'm using is (Tero Kristo's repo - branch 3.13-rc7-dt-clks-v13). Is there something that I'm missing? > > Here below you can find more info about my configuration: > > boot error messages: > eth0: ERROR while getting interface flags: No such device > SIOCSIFADDR: No such device > eth0: ERROR while getting interface flags: No such device > SIOCADDRT: Network is unreachable > > root@OMAP5:~# /usr/lib/klibc/bin/ipconfig eth0 > ipconfig: eth0: SIOCGIFINDEX: No such device > /usr/lib/klibc/bin/ipconfig: no devices to configure > > root@OMAP5:~# uname -a > Linux OMAP5 3.13.0-rc7-g2a4526d-dirty #0 SMP Wed Jan 8 10:41:48 CET 2014x > > root@OMAP5:~# dmesg | grep eth > [ 1.661434] usbcore: registered new interface driver cdc_ether > > Regards, > > > On 08/01/2014 07:15, Roger Quadros wrote: >> Hi Benoit & Tony, >> >> This patchset brings up USB Host ports and Ethernet port on >> the OMAP5 uEVM board. >> >> It depends on the TI Clock DT conversion patches [1] and is based >> on 3.13-rc7 >> >> [1] - http://article.gmane.org/gmane.linux.ports.arm.kernel/289895 >> >> Changelog: >> >> v4: >> - Updated DT binding document for clock binding >> >> v3: >> - Rebased on top of 3.13-rc7 >> >> cheers, >> -roger >> >> Roger Quadros (5): >> mfd: omap-usb-host: Update DT clock binding information >> ARM: dts: OMAP5: Add 60MHz clock reference to USB Host module >> ARM: dts: omap4-panda: Provide USB PHY clock >> ARM: dts: omap5-uevm: Provide USB PHY clock >> ARM: OMAP2+: Remove legacy_init_ehci_clk() >> >> Documentation/devicetree/bindings/mfd/omap-usb-host.txt | 4 ++++ >> arch/arm/boot/dts/omap4-panda-common.dtsi | 8 ++------ >> arch/arm/boot/dts/omap5-uevm.dts | 8 ++------ >> arch/arm/boot/dts/omap5.dtsi | 2 ++ >> arch/arm/mach-omap2/pdata-quirks.c | 16 ---------------- >> 5 files changed, 10 insertions(+), 28 deletions(-) >> > > > -- > *Michele Paolino*, Virtualization R&D Engineer > Virtual Open Systems > /Open Source KVM Virtualization Developments/ > /Multicore Systems Virtualization Porting Services/ > Web/:/ www.virtualopensystems. com > > -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html