Re: [PATCH v4 2/3] ata: ahci_platform: Manage SATA PHY

[Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>]

On 09-01-2014 14:56, Roger Quadros wrote:

> From: Balaji T K <balajitk@ti.com>

> Some platforms have a PHY hooked up to the
> SATA controller. The PHY needs to be initialized
> and powered up for SATA to work. We do that
> using the PHY framework.

> [Roger Q] Cleaned up.

> CC: Tejun Heo <tj@kernel.org>
> Signed-off-by: Balaji T K <balajitk@ti.com>
> Signed-off-by: Roger Quadros <rogerq@ti.com>
[...]

> diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
> index d5ced13..b476642 100644
> --- a/drivers/ata/ahci_platform.c
> +++ b/drivers/ata/ahci_platform.c
> @@ -142,6 +142,39 @@ static int ahci_probe(struct platform_device *pdev)
>   		}
>   	}
>
> +	hpriv->phy = devm_phy_get(dev, "sata-phy");
> +	if (IS_ERR(hpriv->phy)) {
> +		rc = PTR_ERR(hpriv->phy);
> +		switch (rc) {
> +		case -ENODEV:
> +		case -ENOSYS:
> +			/* continue normally */
> +			hpriv->phy = NULL;
> +			break;
> +
> +		case -EPROBE_DEFER:
> +			goto disable_unprepare_clk;
> +			break;

    Well, well, *break* after *goto*? :-)

> +
> +		default:
> +			dev_err(dev, "couldn't get sata-phy\n");
> +			goto disable_unprepare_clk;
> +			break;

    Again?

WBR, Sergei