From: Nishanth Menon <nm@ti.com>
To: Tero Kristo <t-kristo@ti.com>,
linux-omap@vger.kernel.org, paul@pwsan.com, tony@atomide.com,
rnayak@ti.com, bcousson@baylibre.com, mturquette@linaro.org
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: Re: [PATCHv13 00/40] ARM: TI SoC clock DT conversion
Date: Thu, 9 Jan 2014 15:22:03 -0600 [thread overview]
Message-ID: <52CF12FB.6000602@ti.com> (raw)
In-Reply-To: <1389276051-1326-1-git-send-email-t-kristo@ti.com>
On 01/09/2014 08:00 AM, Tero Kristo wrote:
> Hi,
>
> So, bad luck number release for this, as v12 wasn't sufficient still.
>
> Changes compared to previous version:
> - Dropped any changes to generic clock drivers, as it seems impossible
> to agree anything in short term, this means the patch set shrank in
> size from 49 patches to 40 (first 9 patches were dropped).
> - Copy pasted implementation for clk-divider and clk-mux from drivers/clk
> to drivers/clk/ti, and made the modifications needed to the TI version
> of the clock drivers only (based on discussions with Mike, this is fine)
> - Changed name of clk_ll_ops to ti_clk_ll_ops so that this doesn't conflict
> with any generic implementation we might have at some point, migrating
> this to the generic version should be easy enough also.
> - Fixed trace_clk_div_div_ck for omap4, this node was broken in previous
> versions and resulted into an orphan clock node
> - Fixed compile problem for omap5 only build reported by Felipe
> - Fixed a couple of sparse warnings
> - changed the mach-omap2/clock.c to use readl_relaxed / writel_relaxed
> instead of __raw_readl / __raw_writel
>
> Testing done:
> - omap3-beagle: boot / suspend-resume (RET) / suspend-resume (OFF)
> - omap4-panda-es: boot / suspend-resume (RET)
> - omap5-uevm: boot
> - am335x-bone: boot
> - dra7-evm: boot
>
> Maintainer friendly branches also available:
>
> tree: https://github.com/t-kristo/linux-pm.git
>
> clk driver only (Mike): clk-next-dt-clks-v13
> DTS data only (Benoit): dts_for_3.14-dt-clks-v13
> full-branch (Tony/Paul): 3.13-rc7-dt-clks-v13
>
> -Tero
>
Maintainer branches conflicts (using 3.13-rc7-dt-clks-v13):
=============================
Conflict resolution during rebase to maintainer's -14 branches:
1. (trivial) Against mike's clk-next dbdf6ff Merge branch
'clk-next-unregister' into clk-next
Could not apply 2edf7ad... CLK: TI: add DT alias clock registration
mechanism
conflict drivers/clk/Makefile (trivial fix)
2. (manual, but changes are easy) Against Tony's omap-for-v3.14/be
fc6ca98 ARM: OMAP: debug-leds: raw read and write endian fix
ARM: OMAP2+: clock: use driver API instead of direct memory read/write
conflicts with be changes on Tony's be branch.
commit 80f304dd2360cf5d50953c4eb4e902536f6a1263
ARM: OMAP2+: raw read and write endian fix
Conflict:
arch/arm/mach-omap2/clkt_clksel.c
arch/arm/mach-omap2/clkt_dpll.c
arch/arm/mach-omap2/clkt_iclk.c
arch/arm/mach-omap2/clock.c
arch/arm/mach-omap2/clock36xx.c
arch/arm/mach-omap2/dpll3xxx.c
arch/arm/mach-omap2/dpll44xx.c
Both change raw_readls -> should now be just clk api instead which
already does readl_relaxed etc.. If Tony feels like, then we should
probably post a branch based on 'be' branch for easy merge.
3. I could not detect any merge conflict against Benoit's queued up
series (but maybe he has'nt pushed everything to remote tree)..
Patch verification report:
==========================
Report: http://pastebin.mozilla.org/3976492
* sparse warning added in [PATCH 06/40] CLK: ti: add support for ti
divider-clock, [PATCH 10/40] clk: ti: add support for basic mux clock
+drivers/clk/ti/divider.c: warning: context imbalance in
'ti_clk_divider_set_rate' - different lock contexts for basic block
+drivers/clk/ti/mux.c: warning: context imbalance in
'ti_clk_mux_set_parent' - different lock contexts for basic block
* checkpatch warning [PATCH 16/40] CLK: TI: add am33xx clock init
file, [PATCH 18/40] CLK: TI: add omap3 clock init file
WARNING: static const char * array should probably be static const
char * const
Boot reports:
=============
- previous orphan clocks seem solved.
- All available platforms seem to boot fine and no regression could be
seen on initial view
OMAP2430:
1. SDP2430
before: http://pastebin.mozilla.org/3976359
after: http://pastebin.mozilla.org/3976467
AM335x:
2. am335x-evm
before: http://pastebin.mozilla.org/3976284
after: http://pastebin.mozilla.org/3976374
3. am335x-sk
before: http://pastebin.mozilla.org/3976295
after: http://pastebin.mozilla.org/3976375
4. BeagleBone Black:
before: http://pastebin.mozilla.org/3976321
after: http://pastebin.mozilla.org/3976441
AM3517:
5. am3517-evm
before: http://pastebin.mozilla.org/3976297
after: http://pastebin.mozilla.org/3976397
6. craneboard
before: http://pastebin.mozilla.org/3976322
after: http://pastebin.mozilla.org/3976452
OMAP3430:
7. ldp
before: http://pastebin.mozilla.org/3976356
after: http://pastebin.mozilla.org/3976455
8. sdp3430
before: http://pastebin.mozilla.org/3976360
after: http://pastebin.mozilla.org/3976468
OMAP3630/DM3730:
9. am37x-evm
before: http://pastebin.mozilla.org/3976300
after: http://pastebin.mozilla.org/3976398
10. beagle-XM
before: http://pastebin.mozilla.org/3976319
after: http://pastebin.mozilla.org/3976440
OMAP4430:
11. SDP4430
before: http://pastebin.mozilla.org/3976361
after: http://pastebin.mozilla.org/3976470
OMAP4460:
12. PandaBoard-ES
before: http://pastebin.mozilla.org/3976358
after: http://pastebin.mozilla.org/3976456
OMAP5432:
13. OMAP5uEVM
before: http://pastebin.mozilla.org/3976362 (no boot)
after: http://pastebin.mozilla.org/3976471 (boot)
DRA7:
14. dra7evm
before: http://pastebin.mozilla.org/3976354 (no boot)
after: http://pastebin.mozilla.org/3976453 (boot)
AM437x:
15. am43xx-epos + out-of-tree patches for engineering samples
before: http://pastebin.mozilla.org/3976306 (no boot)
after: http://pastebin.mozilla.org/3976399 (boot)
--
Regards,
Nishanth Menon
next prev parent reply other threads:[~2014-01-09 21:22 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-09 14:00 [PATCHv13 00/40] ARM: TI SoC clock DT conversion Tero Kristo
2014-01-09 14:00 ` [PATCHv13 01/40] CLK: TI: add DT alias clock registration mechanism Tero Kristo
2014-01-09 14:00 ` [PATCHv13 02/40] CLK: ti: add init support for clock IP blocks Tero Kristo
2014-01-09 14:00 ` [PATCHv13 03/40] CLK: TI: Add DPLL clock support Tero Kristo
2014-01-09 14:00 ` [PATCHv13 04/40] CLK: TI: add autoidle support Tero Kristo
2014-01-09 14:00 ` [PATCHv13 05/40] clk: ti: add composite clock support Tero Kristo
2014-01-09 14:00 ` [PATCHv13 06/40] CLK: ti: add support for ti divider-clock Tero Kristo
2014-01-09 14:00 ` [PATCHv13 07/40] clk: ti: add support for TI fixed factor clock Tero Kristo
2014-01-09 14:00 ` [PATCHv13 09/40] CLK: TI: add support for clockdomain binding Tero Kristo
2014-01-09 14:00 ` [PATCHv13 10/40] clk: ti: add support for basic mux clock Tero Kristo
2014-01-09 14:00 ` [PATCHv13 11/40] CLK: TI: add omap4 clock init file Tero Kristo
2014-01-09 14:00 ` [PATCHv13 12/40] CLK: TI: add omap5 " Tero Kristo
2014-01-09 14:00 ` [PATCHv13 15/40] CLK: TI: add dra7 " Tero Kristo
2014-01-09 14:00 ` [PATCHv13 16/40] CLK: TI: add am33xx " Tero Kristo
2014-01-09 14:00 ` [PATCHv13 18/40] CLK: TI: add omap3 " Tero Kristo
2014-01-09 14:00 ` [PATCHv13 20/40] ARM: dts: omap4 clock data Tero Kristo
2014-01-09 14:00 ` [PATCHv13 22/40] ARM: dts: dra7 " Tero Kristo
2014-01-09 14:00 ` [PATCHv13 23/40] ARM: dts: clk: Add apll related clocks Tero Kristo
2014-01-09 14:00 ` [PATCHv13 24/40] ARM: dts: DRA7: Change apll_pcie_m2_ck to fixed factor clock Tero Kristo
2014-01-09 14:00 ` [PATCHv13 25/40] ARM: dts: DRA7: Add PCIe related clock nodes Tero Kristo
[not found] ` <1389276051-1326-1-git-send-email-t-kristo-l0cyMroinI0@public.gmane.org>
2014-01-09 14:00 ` [PATCHv13 08/40] CLK: TI: add support for gate clock Tero Kristo
2014-01-09 14:00 ` [PATCHv13 13/40] CLK: TI: omap5: Initialize USB_DPLL at boot Tero Kristo
2014-01-09 14:00 ` [PATCHv13 14/40] CLK: TI: DRA7: Add APLL support Tero Kristo
2014-01-09 14:00 ` [PATCHv13 17/40] CLK: TI: add interface clock support for OMAP3 Tero Kristo
2014-01-09 14:00 ` [PATCHv13 19/40] CLK: TI: add am43xx clock init file Tero Kristo
2014-01-09 14:00 ` [PATCHv13 21/40] ARM: dts: omap5 clock data Tero Kristo
2014-01-09 14:00 ` [PATCHv13 26/40] ARM: dts: am33xx " Tero Kristo
2014-01-09 14:00 ` [PATCHv13 27/40] ARM: dts: omap3 " Tero Kristo
2014-01-20 18:00 ` Sebastian Reichel
2014-01-21 7:42 ` Tero Kristo
2014-01-21 14:37 ` [PATCH] ARM: dts: omap3 clocks: simplify ssi aliases Sebastian Reichel
2014-02-13 22:49 ` Tony Lindgren
2014-02-14 1:25 ` Sebastian Reichel
2014-02-14 13:47 ` Tero Kristo
2014-02-28 22:03 ` Tony Lindgren
2014-01-09 14:00 ` [PATCHv13 28/40] ARM: dts: AM35xx: use DT clock data Tero Kristo
2014-01-09 14:00 ` [PATCHv13 29/40] ARM: dts: am43xx " Tero Kristo
2014-01-09 14:00 ` [PATCHv13 30/40] ARM: OMAP2+: clock: add support for indexed memmaps Tero Kristo
2014-01-09 14:00 ` [PATCHv13 33/40] ARM: OMAP3: hwmod: initialize clkdm from clkdm_name Tero Kristo
2014-01-09 14:00 ` [PATCHv13 35/40] ARM: OMAP2+: io: use new clock init API Tero Kristo
2014-01-09 14:00 ` [PATCHv13 36/40] ARM: OMAP4: remove old clock data and link in new clock init code Tero Kristo
2014-01-09 14:00 ` [PATCHv13 37/40] ARM: OMAP: DRA7: Enable clock init Tero Kristo
2014-01-09 14:00 ` [PATCHv13 38/40] ARM: AM43xx: " Tero Kristo
2014-01-09 14:00 ` [PATCHv13 39/40] ARM: AM33xx: remove old clock data and link in new clock init code Tero Kristo
2014-01-09 14:00 ` [PATCHv13 40/40] ARM: OMAP3: use DT clock init if DT data is available Tero Kristo
2014-01-09 22:23 ` [PATCHv13 00/40] ARM: TI SoC clock DT conversion Mike Turquette
2014-01-10 18:53 ` Tony Lindgren
2014-01-11 9:54 ` Tero Kristo
2014-01-12 0:36 ` Tony Lindgren
2014-01-09 14:00 ` [PATCHv13 31/40] ARM: OMAP2+: clock: use driver API instead of direct memory read/write Tero Kristo
2014-01-09 14:00 ` [PATCHv13 32/40] ARM: OMAP: hwmod: fix an incorrect clk type cast with _get_clkdm Tero Kristo
2014-01-09 14:00 ` [PATCHv13 34/40] ARM: OMAP2+: PRM: add support for initializing PRCM clock modules from DT Tero Kristo
2014-01-09 17:22 ` [PATCHv13 00/40] ARM: TI SoC clock DT conversion Felipe Balbi
2014-01-09 18:40 ` Felipe Balbi
2014-01-09 18:43 ` Felipe Balbi
2014-01-09 21:22 ` Nishanth Menon [this message]
2014-01-09 23:15 ` Felipe Balbi
2014-01-10 9:52 ` Tero Kristo
2014-01-10 16:13 ` Felipe Balbi
2014-01-10 16:30 ` Tero Kristo
2014-01-10 18:51 ` Tony Lindgren
2014-01-14 12:41 ` Tero Kristo
2014-01-14 20:36 ` Felipe Balbi
2014-01-15 2:04 ` Felipe Balbi
2014-01-15 3:16 ` Mike Turquette
2014-01-15 3:50 ` Mike Turquette
2014-01-15 13:41 ` Tero Kristo
2014-01-15 15:59 ` Nishanth Menon
2014-01-15 17:13 ` Tony Lindgren
2014-01-15 19:23 ` Mike Turquette
2014-01-15 19:35 ` Tony Lindgren
2014-01-16 21:39 ` Mike Turquette
2014-01-16 23:05 ` Nishanth Menon
2014-01-17 17:46 ` Kevin Hilman
2014-01-17 17:53 ` Tony Lindgren
2014-01-17 18:11 ` Tero Kristo
2014-01-17 20:58 ` Mike Turquette
2014-01-18 0:02 ` Nishanth Menon
2014-01-18 0:12 ` Olof Johansson
2014-01-18 0:19 ` Nishanth Menon
2014-01-18 0:23 ` Olof Johansson
2014-01-18 1:20 ` Nishanth Menon
2014-01-18 18:11 ` Sebastian Reichel
2014-01-20 17:36 ` Nishanth Menon
2014-01-18 18:07 ` Tony Lindgren
2014-01-17 20:02 ` Nishanth Menon
2014-01-11 16:35 ` Joachim Eastwood
2014-01-13 15:49 ` Tero Kristo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52CF12FB.6000602@ti.com \
--to=nm@ti.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=paul@pwsan.com \
--cc=rnayak@ti.com \
--cc=t-kristo@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).