From mboxrd@z Thu Jan 1 00:00:00 1970 From: zhangfei Subject: Re: [PATCH 1/3] mmc: dw_mmc: use slot-gpio to handle cd pin Date: Wed, 15 Jan 2014 09:09:09 +0800 Message-ID: <52D5DFB5.7@linaro.org> References: <1389278112-7099-1-git-send-email-zhangfei.gao@linaro.org> <1389278112-7099-2-git-send-email-zhangfei.gao@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Sender: linux-mmc-owner@vger.kernel.org To: Olof Johansson , Kevin Hilman Cc: Chris Ball , Arnd Bergmann , Mike Turquette , Rob Herring , Jaehoon Chung , Seungwon Jeon , Kumar Gala , Haojian Zhuang , "linux-mmc@vger.kernel.org" , linux-arm-kernel , Patch Tracking , "devicetree@vger.kernel.org" , Tomasz Figa List-Id: devicetree@vger.kernel.org On 01/15/2014 01:23 AM, Olof Johansson wrote: > On Tue, Jan 14, 2014 at 7:58 AM, Kevin Hilman wrote: >> On Thu, Jan 9, 2014 at 6:35 AM, Zhangfei Gao wrote: >>> Suggested by Jaehoon: Use slot-gpio to handle cd-gpio >>> Add function dw_mci_of_get_cd_gpio to check "cd-gpios" from dts. >>> mmc_gpio_request_cd and mmc_gpio_get_cd are used to handle cd pin >>> >>> Signed-off-by: Zhangfei Gao >>> Acked-by: Jaehoon Chung >> >> The Samsung Arndale board started failing boot from MMC root tests >> starting with next-20140113 and I bisected it down to this patch. >> Reverting this patch on top of next-20140114 gets Arndale booting >> again from MMC. Is there some supporting DT data that's missing for >> Arndale? > > Rather, it looks like this patch changes behaviour and no longer uses > dw_mci_get_cd() to find out if there's a card attached -- it switches > to rely only on GPIO (see the last chunk in the patch). That seems > broken? > Oops, Change using dw_mci_get_cd set flag DW_MMC_CARD_PRESENT. And dw_mci_get_cd is called from mmc_rescan, a litter later than dw_mci_probe. Is that too late? Thanks