From: Nishanth Menon <nm@ti.com>
To: Mike Turquette <mturquette@linaro.org>,
Tero Kristo <t-kristo@ti.com>, Tony Lindgren <tony@atomide.com>,
Kevin Hilman <khilman@linaro.org>
Cc: devicetree@vger.kernel.org, paul@pwsan.com, rnayak@ti.com,
balbi@ti.com, bcousson@baylibre.com,
Olof Johansson <olof@lixom.net>,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCHv13 00/40] ARM: TI SoC clock DT conversion
Date: Fri, 17 Jan 2014 18:02:12 -0600 [thread overview]
Message-ID: <52D9C484.6000404@ti.com> (raw)
In-Reply-To: <20140117205832.4167.95162@quantum>
On 01/17/2014 02:58 PM, Mike Turquette wrote:
> Quoting Tero Kristo (2014-01-17 10:11:06)
>> On 01/17/2014 07:53 PM, Tony Lindgren wrote:
>>> * Kevin Hilman <khilman@linaro.org> [140117 09:48]:
>>>> Mike Turquette <mturquette@linaro.org> writes:
>>>>
>>>> [...]
>>>>
>>>>> I took Tony's advice and fast-forwarded clk-next to -rc7 and applied
>>>>> Tero's series. This includes the AM3517 bits now. I've pushed this
>>>>> branch to clk-next-omap (force update) on my Linaro mirror. Can you do a
>>>>> final sanity test before I merge this into clk-next?
>>
>> I think you accidentally merged wrong branch to clk-next-omap with the
>> latest refresh. This is one is missing the build-fixes now, when it
>> earlier had those in.
>>
>> The correct branch to merge was 3.13-rc7-dt-clks-v13-build-fixes.
>>
>> This also causes the build failure below for omap1.
>
> You are right. I broke the OMAPs. I force updated clk-next-omap (and
> clk-next) with the correct branch this time.
Build tests: omap1_defconfig:
clk-next-6a0cad9: builds fine
clk-next-6a0cad9 + next-20140117: http://slexy.org/view/s2HgtvUtAl
disabling CONFIG_BT, builds fine
Boot tests: clk-next-6a0cad9, clk-next-6a0cad9 + next-20140117 : No
regressions seen
Detailed Boot logs:
clk-next-6a0cad9 omap2plus_defconfig:
1: am335x-evm: Boot PASS: http://slexy.org/raw/s21idEk2IZ
2: am335x-sk: Boot PASS: http://slexy.org/raw/s21Q4w8gWT
3: am3517-evm: Boot PASS: http://slexy.org/raw/s21dT7y2CA
4: am37x-evm: Boot PASS: http://slexy.org/raw/s2VFaOtuDP
5: am43xx-epos: Boot PASS: http://slexy.org/raw/s20L0DBt1d
6: beagleboard-xm: Boot PASS: http://slexy.org/raw/s20gKsdH3A
7: beaglebone-black: Boot PASS: http://slexy.org/raw/s2ZXTJswqY
8: crane: No Image built - Missing platform support?:
9: dra7: Boot PASS: http://slexy.org/raw/s2XZfjQz67
10: ldp: No Image built - Missing platform support?:
11: panda-es: Boot PASS: http://slexy.org/raw/s2ESRQgBbc
12: sdp2430: No Image built - Missing platform support?:
13: sdp3430: Boot PASS: http://slexy.org/raw/s2YsAO3ZPJ
14: sdp4430: Boot PASS: http://slexy.org/raw/s2MxxggHkh
15: uevm: Boot PASS: http://slexy.org/raw/s2wJT0B7wf
TOTAL = 15 boards, Booted Boards = 12, No Boot boards = 3
clk-next-6a0cad9 multi_v7_defconfig:
1: am335x-evm: Boot FAIL: http://slexy.org/raw/s21AXBDbM9
* regulator/mmc missing here
2: am335x-sk: Boot FAIL: http://slexy.org/raw/s21pQPhupJ
* regulator/mmc missing here
3: am3517-evm: Boot PASS: http://slexy.org/raw/s21iM7TEiQ
4: am37x-evm: Boot PASS: http://slexy.org/raw/s2pBD6nplU
5: am43xx-epos: Boot PASS: http://slexy.org/raw/s2X9mnCKhT
6: beagleboard-xm: Boot PASS: http://slexy.org/raw/s21CjzZtZ6
7: beaglebone-black: Boot PASS: http://slexy.org/raw/s2vCfnss8N
8: crane: No Image built - Missing platform support?:
9: dra7: Boot FAIL: http://slexy.org/raw/s21Xn4t22A
* DRA7 not enabled?
10: ldp: No Image built - Missing platform support?:
11: panda-es: Boot PASS: http://slexy.org/raw/s21ZoijL9i
12: sdp2430: No Image built - Missing platform support?:
13: sdp3430: Boot PASS: http://slexy.org/raw/s21rdIfh7S
14: sdp4430: Boot PASS: http://slexy.org/raw/s21HXFj9cw
15: uevm: Boot FAIL: http://slexy.org/raw/s21m26VdbI
* regulator/mmc missing here
TOTAL = 15 boards, Booted Boards = 8, No Boot boards = 7
clk-next-6a0cad9 multi_v7_defconfig+CONFIG_LPAE=y:
1: am335x-evm: Boot FAIL: http://slexy.org/raw/s21GIuprIx
* regulator/mmc missing here
2: am335x-sk: Boot FAIL: http://slexy.org/raw/s20Vy6K9Rg
* regulator/mmc missing here
3: am3517-evm: Boot PASS: http://slexy.org/raw/s20jXaoTYq
4: am37x-evm: Boot PASS: http://slexy.org/raw/s20bk4uHcb
5: am43xx-epos: Boot PASS: http://slexy.org/raw/s2gVGjYMXz
6: beagleboard-xm: Boot PASS: http://slexy.org/raw/s26D0F2N1t
7: beaglebone-black: Boot PASS: http://slexy.org/raw/s2ThmugNzC
8: crane: No Image built - Missing platform support?:
9: dra7: Boot FAIL: http://slexy.org/raw/s21HdQFchd
* DRA7 not enabled?
10: ldp: No Image built - Missing platform support?:
11: panda-es: Boot PASS: http://slexy.org/raw/s2042Y9Pyb
12: sdp2430: No Image built - Missing platform support?:
13: sdp3430: Boot PASS: http://slexy.org/raw/s2NCg8nLki
14: sdp4430: Boot PASS: http://slexy.org/raw/s25GxRkWcj
15: uevm: Boot FAIL: http://slexy.org/raw/s2Q7xBYM3a
* regulator/mmc missing here
TOTAL = 15 boards, Booted Boards = 8, No Boot boards = 7
clk-next-6a0cad9 + next-20140117 omap2plus_defconfig:
1: am335x-evm: Boot PASS: http://slexy.org/raw/s2ll3LdMN2
2: am335x-sk: Boot PASS: http://slexy.org/raw/s2jyAF2Och
3: am3517-evm: Boot PASS: http://slexy.org/raw/s20nPsCcUS
4: am37x-evm: Boot PASS: http://slexy.org/raw/s2Rn7Vqh8x
5: am43xx-epos: Boot PASS: http://slexy.org/raw/s2frIhnu6Y
6: beagleboard-xm: Boot PASS: http://slexy.org/raw/s2GNee8kHF
7: beaglebone-black: Boot PASS: http://slexy.org/raw/s2G7fD4rGD
8: crane: No Image built - Missing platform support?: (pending
merge from Benoit)
9: dra7: Boot PASS: http://slexy.org/raw/s21W2zLl5q
10: ldp: Boot FAIL: http://slexy.org/raw/s21518Tibq
* intermittent failures seen previously as well -> debug pending
11: panda-es: Boot PASS: http://slexy.org/raw/s20WddZMVp
12: sdp2430: Boot PASS: http://slexy.org/raw/s2cVr3BLLi
13: sdp3430: Boot PASS: http://slexy.org/raw/s21h9oDSCv
14: sdp4430: Boot PASS: http://slexy.org/raw/s21PWBCUKn
15: uevm: Boot PASS: http://slexy.org/raw/s2OxDQtC9E
TOTAL = 15 boards, Booted Boards = 13, No Boot boards = 2
clk-next-6a0cad9 + next-20140117 multi_v7_defconfig:
1: am335x-evm: Boot PASS: http://slexy.org/raw/s20MpjXQ71
2: am335x-sk: Boot PASS: http://slexy.org/raw/s2T0vnX8s7
3: am3517-evm: Boot PASS: http://slexy.org/raw/s2hvsW2oVi
4: am37x-evm: Boot PASS: http://slexy.org/raw/s2Li1DqaeQ
5: am43xx-epos: Boot PASS: http://slexy.org/raw/s2MHh0c19C
6: beagleboard-xm: Boot PASS: http://slexy.org/raw/s21RnOxxUk
7: beaglebone-black: Boot PASS: http://slexy.org/raw/s2qaKF0lqp
8: crane: No Image built - Missing platform support?:
9: dra7: Boot FAIL: http://slexy.org/raw/s203u2hQ1m
* DRA7 not enabled?
10: ldp: Boot PASS: http://slexy.org/raw/s2ug8MyzzE
11: panda-es: Boot FAIL: http://slexy.org/raw/s2NVPvwb2I
* known issue (https://patchwork.kernel.org/patch/3084521/)
12: sdp2430: Boot FAIL: v6 platform - wont boot with multi_v7
13: sdp3430: Boot PASS: http://slexy.org/raw/s28vswaDnc
14: sdp4430: Boot PASS: http://slexy.org/raw/s21wk2lqiC
15: uevm: Boot PASS: http://slexy.org/raw/s21soF15Dy
TOTAL = 15 boards, Booted Boards = 11, No Boot boards = 4
clk-next-6a0cad9 + next-20140117 multi_v7_defconfig + CONFIG_LPAE=y:
1: am335x-evm: Boot PASS: http://slexy.org/raw/s21GRhEOj4
2: am335x-sk: Boot PASS: http://slexy.org/raw/s20zcNsD8h
3: am3517-evm: Boot PASS: http://slexy.org/raw/s27U9IfRKR
4: am37x-evm: Boot PASS: http://slexy.org/raw/s2zYyeonec
5: am43xx-epos: Boot PASS: http://slexy.org/raw/s21iCRjTHK
6: beagleboard-xm: Boot PASS: http://slexy.org/raw/s20bPGL3Sz
7: beaglebone-black: Boot PASS: http://slexy.org/raw/s21AhFmkCk
8: crane: No Image built - Missing platform support?:
9: dra7: Boot FAIL: http://slexy.org/raw/s21Qh3sQRu
* DRA7 not enabled?
10: ldp: Boot PASS: http://slexy.org/raw/s21fvBfBgs
11: panda-es: Boot FAIL: http://slexy.org/raw/s20RsgVUZJ
* known issue (https://patchwork.kernel.org/patch/3084521/)
12: sdp2430: Boot FAIL: v6 platform - wont boot with multi_v7
13: sdp3430: Boot PASS: http://slexy.org/raw/s20rhjjBwe
14: sdp4430: Boot PASS: http://slexy.org/raw/s2My0UfNPm
15: uevm: Boot PASS: http://slexy.org/raw/s21aqF6eMN
TOTAL = 15 boards, Booted Boards = 11, No Boot boards = 4
--
Regards,
Nishanth Menon
next prev parent reply other threads:[~2014-01-18 0:02 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-09 14:00 [PATCHv13 00/40] ARM: TI SoC clock DT conversion Tero Kristo
2014-01-09 14:00 ` [PATCHv13 01/40] CLK: TI: add DT alias clock registration mechanism Tero Kristo
2014-01-09 14:00 ` [PATCHv13 02/40] CLK: ti: add init support for clock IP blocks Tero Kristo
2014-01-09 14:00 ` [PATCHv13 03/40] CLK: TI: Add DPLL clock support Tero Kristo
2014-01-09 14:00 ` [PATCHv13 04/40] CLK: TI: add autoidle support Tero Kristo
2014-01-09 14:00 ` [PATCHv13 05/40] clk: ti: add composite clock support Tero Kristo
2014-01-09 14:00 ` [PATCHv13 06/40] CLK: ti: add support for ti divider-clock Tero Kristo
2014-01-09 14:00 ` [PATCHv13 07/40] clk: ti: add support for TI fixed factor clock Tero Kristo
2014-01-09 14:00 ` [PATCHv13 09/40] CLK: TI: add support for clockdomain binding Tero Kristo
2014-01-09 14:00 ` [PATCHv13 10/40] clk: ti: add support for basic mux clock Tero Kristo
2014-01-09 14:00 ` [PATCHv13 11/40] CLK: TI: add omap4 clock init file Tero Kristo
2014-01-09 14:00 ` [PATCHv13 12/40] CLK: TI: add omap5 " Tero Kristo
[not found] ` <1389276051-1326-1-git-send-email-t-kristo-l0cyMroinI0@public.gmane.org>
2014-01-09 14:00 ` [PATCHv13 08/40] CLK: TI: add support for gate clock Tero Kristo
2014-01-09 14:00 ` [PATCHv13 13/40] CLK: TI: omap5: Initialize USB_DPLL at boot Tero Kristo
2014-01-09 14:00 ` [PATCHv13 14/40] CLK: TI: DRA7: Add APLL support Tero Kristo
2014-01-09 14:00 ` [PATCHv13 17/40] CLK: TI: add interface clock support for OMAP3 Tero Kristo
2014-01-09 14:00 ` [PATCHv13 19/40] CLK: TI: add am43xx clock init file Tero Kristo
2014-01-09 14:00 ` [PATCHv13 21/40] ARM: dts: omap5 clock data Tero Kristo
2014-01-09 14:00 ` [PATCHv13 26/40] ARM: dts: am33xx " Tero Kristo
2014-01-09 14:00 ` [PATCHv13 27/40] ARM: dts: omap3 " Tero Kristo
2014-01-20 18:00 ` Sebastian Reichel
2014-01-21 7:42 ` Tero Kristo
2014-01-21 14:37 ` [PATCH] ARM: dts: omap3 clocks: simplify ssi aliases Sebastian Reichel
2014-02-13 22:49 ` Tony Lindgren
2014-02-14 1:25 ` Sebastian Reichel
2014-02-14 13:47 ` Tero Kristo
2014-02-28 22:03 ` Tony Lindgren
2014-01-09 14:00 ` [PATCHv13 28/40] ARM: dts: AM35xx: use DT clock data Tero Kristo
2014-01-09 14:00 ` [PATCHv13 29/40] ARM: dts: am43xx " Tero Kristo
2014-01-09 14:00 ` [PATCHv13 30/40] ARM: OMAP2+: clock: add support for indexed memmaps Tero Kristo
2014-01-09 14:00 ` [PATCHv13 33/40] ARM: OMAP3: hwmod: initialize clkdm from clkdm_name Tero Kristo
2014-01-09 14:00 ` [PATCHv13 35/40] ARM: OMAP2+: io: use new clock init API Tero Kristo
2014-01-09 14:00 ` [PATCHv13 36/40] ARM: OMAP4: remove old clock data and link in new clock init code Tero Kristo
2014-01-09 14:00 ` [PATCHv13 37/40] ARM: OMAP: DRA7: Enable clock init Tero Kristo
2014-01-09 14:00 ` [PATCHv13 38/40] ARM: AM43xx: " Tero Kristo
2014-01-09 14:00 ` [PATCHv13 39/40] ARM: AM33xx: remove old clock data and link in new clock init code Tero Kristo
2014-01-09 14:00 ` [PATCHv13 40/40] ARM: OMAP3: use DT clock init if DT data is available Tero Kristo
2014-01-09 22:23 ` [PATCHv13 00/40] ARM: TI SoC clock DT conversion Mike Turquette
2014-01-10 18:53 ` Tony Lindgren
2014-01-11 9:54 ` Tero Kristo
2014-01-12 0:36 ` Tony Lindgren
2014-01-09 14:00 ` [PATCHv13 15/40] CLK: TI: add dra7 clock init file Tero Kristo
2014-01-09 14:00 ` [PATCHv13 16/40] CLK: TI: add am33xx " Tero Kristo
2014-01-09 14:00 ` [PATCHv13 18/40] CLK: TI: add omap3 " Tero Kristo
2014-01-09 14:00 ` [PATCHv13 20/40] ARM: dts: omap4 clock data Tero Kristo
2014-01-09 14:00 ` [PATCHv13 22/40] ARM: dts: dra7 " Tero Kristo
2014-01-09 14:00 ` [PATCHv13 23/40] ARM: dts: clk: Add apll related clocks Tero Kristo
2014-01-09 14:00 ` [PATCHv13 24/40] ARM: dts: DRA7: Change apll_pcie_m2_ck to fixed factor clock Tero Kristo
2014-01-09 14:00 ` [PATCHv13 25/40] ARM: dts: DRA7: Add PCIe related clock nodes Tero Kristo
2014-01-09 14:00 ` [PATCHv13 31/40] ARM: OMAP2+: clock: use driver API instead of direct memory read/write Tero Kristo
2014-01-09 14:00 ` [PATCHv13 32/40] ARM: OMAP: hwmod: fix an incorrect clk type cast with _get_clkdm Tero Kristo
2014-01-09 14:00 ` [PATCHv13 34/40] ARM: OMAP2+: PRM: add support for initializing PRCM clock modules from DT Tero Kristo
2014-01-09 17:22 ` [PATCHv13 00/40] ARM: TI SoC clock DT conversion Felipe Balbi
2014-01-09 18:40 ` Felipe Balbi
2014-01-09 18:43 ` Felipe Balbi
2014-01-09 21:22 ` Nishanth Menon
2014-01-09 23:15 ` Felipe Balbi
2014-01-10 9:52 ` Tero Kristo
2014-01-10 16:13 ` Felipe Balbi
2014-01-10 16:30 ` Tero Kristo
2014-01-10 18:51 ` Tony Lindgren
2014-01-14 12:41 ` Tero Kristo
2014-01-14 20:36 ` Felipe Balbi
2014-01-15 2:04 ` Felipe Balbi
2014-01-15 3:16 ` Mike Turquette
2014-01-15 3:50 ` Mike Turquette
2014-01-15 13:41 ` Tero Kristo
2014-01-15 15:59 ` Nishanth Menon
2014-01-15 17:13 ` Tony Lindgren
2014-01-15 19:23 ` Mike Turquette
2014-01-15 19:35 ` Tony Lindgren
2014-01-16 21:39 ` Mike Turquette
2014-01-16 23:05 ` Nishanth Menon
2014-01-17 17:46 ` Kevin Hilman
2014-01-17 17:53 ` Tony Lindgren
2014-01-17 18:11 ` Tero Kristo
2014-01-17 20:58 ` Mike Turquette
2014-01-18 0:02 ` Nishanth Menon [this message]
2014-01-18 0:12 ` Olof Johansson
2014-01-18 0:19 ` Nishanth Menon
2014-01-18 0:23 ` Olof Johansson
2014-01-18 1:20 ` Nishanth Menon
2014-01-18 18:11 ` Sebastian Reichel
2014-01-20 17:36 ` Nishanth Menon
2014-01-18 18:07 ` Tony Lindgren
2014-01-17 20:02 ` Nishanth Menon
2014-01-11 16:35 ` Joachim Eastwood
2014-01-13 15:49 ` Tero Kristo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52D9C484.6000404@ti.com \
--to=nm@ti.com \
--cc=balbi@ti.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=khilman@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=olof@lixom.net \
--cc=paul@pwsan.com \
--cc=rnayak@ti.com \
--cc=t-kristo@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).