devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v8 0/4] ohci and ehci-platform clks, phy, be and dt support
@ 2014-01-22 19:32 Hans de Goede
       [not found] ` <1390419177-6481-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
  0 siblings, 1 reply; 6+ messages in thread
From: Hans de Goede @ 2014-01-22 19:32 UTC (permalink / raw)
  To: Alan Stern
  Cc: Florian Fainelli, linux-usb,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree

Hi All,

Although v7 was intended as the final version here is a v8, compared to v7
this contains 2 small fixes to the dt-bindings documentation so that the
examples there match the dt-node naming rules.

Besides that I've also rolled v2 of my patches to also add support for
specifying controller endianness through dt into this set.

Regards,

Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH v8 1/4] ohci-platform: Add support for devicetree instantiation
       [not found] ` <1390419177-6481-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
@ 2014-01-22 19:32   ` Hans de Goede
  2014-01-22 19:32   ` [PATCH v8 2/4] ehci-platform: Add support for clks and phy passed through devicetree Hans de Goede
                     ` (2 subsequent siblings)
  3 siblings, 0 replies; 6+ messages in thread
From: Hans de Goede @ 2014-01-22 19:32 UTC (permalink / raw)
  To: Alan Stern
  Cc: Florian Fainelli, linux-usb,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree,
	Hans de Goede

Add support for ohci-platform instantiation from devicetree, including
optionally getting clks and a phy from devicetree, and enabling / disabling
those on power_on / off.

This should allow using ohci-platform from devicetree in various cases.
Specifically after this commit it can be used for the ohci controller found
on Allwinner sunxi SoCs.

Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Acked-by: Alan Stern <stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org>
---
 Documentation/devicetree/bindings/usb/usb-ohci.txt |  22 +++
 drivers/usb/host/ohci-platform.c                   | 164 ++++++++++++++++++---
 2 files changed, 162 insertions(+), 24 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/usb-ohci.txt

diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt
new file mode 100644
index 0000000..6ba38d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt
@@ -0,0 +1,22 @@
+USB OHCI controllers
+
+Required properties:
+- compatible : "usb-ohci"
+- reg : ohci controller register range (address and length)
+- interrupts : ohci controller interrupt
+
+Optional properties:
+- clocks : a list of phandle + clock specifier pairs
+- phys : phandle + phy specifier pair
+- phy-names : "usb"
+
+Example:
+
+	ohci0: usb@01c14400 {
+		compatible = "allwinner,sun4i-a10-ohci", "usb-ohci";
+		reg = <0x01c14400 0x100>;
+		interrupts = <64>;
+		clocks = <&usb_clk 6>, <&ahb_gates 2>;
+		phys = <&usbphy 1>;
+		phy-names = "usb";
+	};
diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
index f351ff5..b2d0e1e 100644
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -3,6 +3,7 @@
  *
  * Copyright 2007 Michael Buesch <m@bues.ch>
  * Copyright 2011-2012 Hauke Mehrtens <hauke-5/S+JYg5SzeELgA04lAiVw@public.gmane.org>
+ * Copyright 2014 Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
  *
  * Derived from the OCHI-SSB driver
  * Derived from the OHCI-PCI driver
@@ -14,11 +15,14 @@
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
 #include <linux/hrtimer.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/err.h>
+#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/usb/ohci_pdriver.h>
 #include <linux/usb.h>
@@ -27,6 +31,13 @@
 #include "ohci.h"
 
 #define DRIVER_DESC "OHCI generic platform driver"
+#define OHCI_MAX_CLKS 3
+#define hcd_to_ohci_priv(h) ((struct ohci_platform_priv *)hcd_to_ohci(h)->priv)
+
+struct ohci_platform_priv {
+	struct clk *clks[OHCI_MAX_CLKS];
+	struct phy *phy;
+};
 
 static const char hcd_name[] = "ohci-platform";
 
@@ -48,11 +59,67 @@ static int ohci_platform_reset(struct usb_hcd *hcd)
 	return ohci_setup(hcd);
 }
 
+static int ohci_platform_power_on(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
+	int clk, ret;
+
+	for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++) {
+		ret = clk_prepare_enable(priv->clks[clk]);
+		if (ret)
+			goto err_disable_clks;
+	}
+
+	if (priv->phy) {
+		ret = phy_init(priv->phy);
+		if (ret)
+			goto err_disable_clks;
+
+		ret = phy_power_on(priv->phy);
+		if (ret)
+			goto err_exit_phy;
+	}
+
+	return 0;
+
+err_exit_phy:
+	phy_exit(priv->phy);
+err_disable_clks:
+	while (--clk >= 0)
+		clk_disable_unprepare(priv->clks[clk]);
+
+	return ret;
+}
+
+static void ohci_platform_power_off(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
+	int clk;
+
+	if (priv->phy) {
+		phy_power_off(priv->phy);
+		phy_exit(priv->phy);
+	}
+
+	for (clk = OHCI_MAX_CLKS - 1; clk >= 0; clk--)
+		if (priv->clks[clk])
+			clk_disable_unprepare(priv->clks[clk]);
+}
+
 static struct hc_driver __read_mostly ohci_platform_hc_driver;
 
 static const struct ohci_driver_overrides platform_overrides __initconst = {
-	.product_desc =	"Generic Platform OHCI controller",
-	.reset =	ohci_platform_reset,
+	.product_desc =		"Generic Platform OHCI controller",
+	.reset =		ohci_platform_reset,
+	.extra_priv_size =	sizeof(struct ohci_platform_priv),
+};
+
+static struct usb_ohci_pdata ohci_platform_defaults = {
+	.power_on =		ohci_platform_power_on,
+	.power_suspend =	ohci_platform_power_off,
+	.power_off =		ohci_platform_power_off,
 };
 
 static int ohci_platform_probe(struct platform_device *dev)
@@ -60,17 +127,23 @@ static int ohci_platform_probe(struct platform_device *dev)
 	struct usb_hcd *hcd;
 	struct resource *res_mem;
 	struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
-	int irq;
-	int err = -ENOMEM;
-
-	if (!pdata) {
-		WARN_ON(1);
-		return -ENODEV;
-	}
+	struct ohci_platform_priv *priv;
+	int err, irq, clk = 0;
 
 	if (usb_disabled())
 		return -ENODEV;
 
+	/*
+	 * Use reasonable defaults so platforms don't have to provide these
+	 * with DT probing on ARM.
+	 */
+	if (!pdata)
+		pdata = &ohci_platform_defaults;
+
+	err = dma_coerce_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));
+	if (err)
+		return err;
+
 	irq = platform_get_irq(dev, 0);
 	if (irq < 0) {
 		dev_err(&dev->dev, "no irq provided");
@@ -83,17 +156,40 @@ static int ohci_platform_probe(struct platform_device *dev)
 		return -ENXIO;
 	}
 
+	hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev,
+			dev_name(&dev->dev));
+	if (!hcd)
+		return -ENOMEM;
+
+	platform_set_drvdata(dev, hcd);
+	dev->dev.platform_data = pdata;
+	priv = hcd_to_ohci_priv(hcd);
+
+	if (pdata == &ohci_platform_defaults && dev->dev.of_node) {
+		priv->phy = devm_phy_get(&dev->dev, "usb");
+		if (IS_ERR(priv->phy)) {
+			err = PTR_ERR(priv->phy);
+			if (err == -EPROBE_DEFER)
+				goto err_put_hcd;
+			priv->phy = NULL;
+		}
+
+		for (clk = 0; clk < OHCI_MAX_CLKS; clk++) {
+			priv->clks[clk] = of_clk_get(dev->dev.of_node, clk);
+			if (IS_ERR(priv->clks[clk])) {
+				err = PTR_ERR(priv->clks[clk]);
+				if (err == -EPROBE_DEFER)
+					goto err_put_clks;
+				priv->clks[clk] = NULL;
+				break;
+			}
+		}
+	}
+
 	if (pdata->power_on) {
 		err = pdata->power_on(dev);
 		if (err < 0)
-			return err;
-	}
-
-	hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev,
-			dev_name(&dev->dev));
-	if (!hcd) {
-		err = -ENOMEM;
-		goto err_power;
+			goto err_put_clks;
 	}
 
 	hcd->rsrc_start = res_mem->start;
@@ -102,21 +198,25 @@ static int ohci_platform_probe(struct platform_device *dev)
 	hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
 	if (IS_ERR(hcd->regs)) {
 		err = PTR_ERR(hcd->regs);
-		goto err_put_hcd;
+		goto err_power;
 	}
 	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (err)
-		goto err_put_hcd;
-
-	platform_set_drvdata(dev, hcd);
+		goto err_power;
 
 	return err;
 
-err_put_hcd:
-	usb_put_hcd(hcd);
 err_power:
 	if (pdata->power_off)
 		pdata->power_off(dev);
+err_put_clks:
+	while (--clk >= 0)
+		clk_put(priv->clks[clk]);
+err_put_hcd:
+	if (pdata == &ohci_platform_defaults)
+		dev->dev.platform_data = NULL;
+
+	usb_put_hcd(hcd);
 
 	return err;
 }
@@ -125,13 +225,22 @@ static int ohci_platform_remove(struct platform_device *dev)
 {
 	struct usb_hcd *hcd = platform_get_drvdata(dev);
 	struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
+	struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
+	int clk;
 
 	usb_remove_hcd(hcd);
-	usb_put_hcd(hcd);
 
 	if (pdata->power_off)
 		pdata->power_off(dev);
 
+	for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++)
+		clk_put(priv->clks[clk]);
+
+	usb_put_hcd(hcd);
+
+	if (pdata == &ohci_platform_defaults)
+		dev->dev.platform_data = NULL;
+
 	return 0;
 }
 
@@ -178,6 +287,12 @@ static int ohci_platform_resume(struct device *dev)
 #define ohci_platform_resume	NULL
 #endif /* CONFIG_PM */
 
+static const struct of_device_id ohci_platform_ids[] = {
+	{ .compatible = "usb-ohci", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ohci_platform_ids);
+
 static const struct platform_device_id ohci_platform_table[] = {
 	{ "ohci-platform", 0 },
 	{ }
@@ -198,6 +313,7 @@ static struct platform_driver ohci_platform_driver = {
 		.owner	= THIS_MODULE,
 		.name	= "ohci-platform",
 		.pm	= &ohci_platform_pm_ops,
+		.of_match_table = ohci_platform_ids,
 	}
 };
 
-- 
1.8.5.3

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v8 2/4] ehci-platform: Add support for clks and phy passed through devicetree
       [not found] ` <1390419177-6481-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
  2014-01-22 19:32   ` [PATCH v8 1/4] ohci-platform: Add support for devicetree instantiation Hans de Goede
@ 2014-01-22 19:32   ` Hans de Goede
  2014-01-22 19:32   ` [PATCH v8 3/4] ohci-platform: Add support for controllers with big-endian regs / descriptors Hans de Goede
  2014-01-22 19:32   ` [PATCH v8 4/4] ehci-platform: " Hans de Goede
  3 siblings, 0 replies; 6+ messages in thread
From: Hans de Goede @ 2014-01-22 19:32 UTC (permalink / raw)
  To: Alan Stern
  Cc: Florian Fainelli, linux-usb,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree,
	Hans de Goede

Currently ehci-platform is only used in combination with devicetree when used
with some Via socs. By extending it to (optionally) get clks and a phy from
devicetree, and enabling / disabling those on power_on / off, it can be used
more generically. Specifically after this commit it can be used for the
ehci controller on Allwinner sunxi SoCs.

Since ehci-platform is intended to handle any generic enough non pci ehci
device, add a "usb-ehci" compatibility string.

There already is a usb-ehci device-tree bindings document, update this
with clks and phy bindings info.

Although actually quite generic so far the via,vt8500 compatibilty string
had its own bindings document. Somehow we even ended up with 2 of them. Since
these provide no extra information over the generic usb-ehci documentation,
this patch removes them.

The ehci-ppc-of.c driver also claims the usb-ehci compatibility string,
even though it mostly is ibm,usb-ehci-440epx specific. ehci-platform.c is
not needed on ppc platforms, so add a !PPC_OF dependency to it to avoid
2 drivers claiming the same compatibility string getting build on ppc.

Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Acked-by: Alan Stern <stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org>
---
 Documentation/devicetree/bindings/usb/usb-ehci.txt |  25 +++-
 .../devicetree/bindings/usb/via,vt8500-ehci.txt    |  15 ---
 .../devicetree/bindings/usb/vt8500-ehci.txt        |  12 --
 drivers/usb/host/Kconfig                           |   1 +
 drivers/usb/host/ehci-platform.c                   | 149 +++++++++++++++++----
 5 files changed, 142 insertions(+), 60 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt
 delete mode 100644 Documentation/devicetree/bindings/usb/vt8500-ehci.txt

diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt
index fa18612..2c1aeeb 100644
--- a/Documentation/devicetree/bindings/usb/usb-ehci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt
@@ -7,13 +7,14 @@ Required properties:
     (debug-port or other) can be also specified here, but only after
     definition of standard EHCI registers.
   - interrupts : one EHCI interrupt should be described here.
-If device registers are implemented in big endian mode, the device
-node should have "big-endian-regs" property.
-If controller implementation operates with big endian descriptors,
-"big-endian-desc" property should be specified.
-If both big endian registers and descriptors are used by the controller
-implementation, "big-endian" property can be specified instead of having
-both "big-endian-regs" and "big-endian-desc".
+
+Optional properties:
+ - big-endian-regs : boolean, set this for hcds with big-endian registers
+ - big-endian-desc : boolean, set this for hcds with big-endian descriptors
+ - big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
+ - clocks : a list of phandle + clock specifier pairs
+ - phys : phandle + phy specifier pair
+ - phy-names : "usb"
 
 Example (Sequoia 440EPx):
     ehci@e0000300 {
@@ -23,3 +24,13 @@ Example (Sequoia 440EPx):
 	   reg = <0 e0000300 90 0 e0000390 70>;
 	   big-endian;
    };
+
+Example (Allwinner sun4i A10 SoC):
+   ehci0: usb@01c14000 {
+	   compatible = "allwinner,sun4i-a10-ehci", "usb-ehci";
+	   reg = <0x01c14000 0x100>;
+	   interrupts = <39>;
+	   clocks = <&ahb_gates 1>;
+	   phys = <&usbphy 1>;
+	   phy-names = "usb";
+   };
diff --git a/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt b/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt
deleted file mode 100644
index 17b3ad1..0000000
--- a/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt
+++ /dev/null
@@ -1,15 +0,0 @@
-VIA/Wondermedia VT8500 EHCI Controller
------------------------------------------------------
-
-Required properties:
-- compatible : "via,vt8500-ehci"
-- reg : Should contain 1 register ranges(address and length)
-- interrupts : ehci controller interrupt
-
-Example:
-
-	ehci@d8007900 {
-		compatible = "via,vt8500-ehci";
-		reg = <0xd8007900 0x200>;
-		interrupts = <43>;
-	};
diff --git a/Documentation/devicetree/bindings/usb/vt8500-ehci.txt b/Documentation/devicetree/bindings/usb/vt8500-ehci.txt
deleted file mode 100644
index 5fb8fd6..0000000
--- a/Documentation/devicetree/bindings/usb/vt8500-ehci.txt
+++ /dev/null
@@ -1,12 +0,0 @@
-VIA VT8500 and Wondermedia WM8xxx SoC USB controllers.
-
-Required properties:
- - compatible: Should be "via,vt8500-ehci" or "wm,prizm-ehci".
- - reg: Address range of the ehci registers. size should be 0x200
- - interrupts: Should contain the ehci interrupt.
-
-usb: ehci@D8007100 {
-	compatible = "wm,prizm-ehci", "usb-ehci";
-	reg = <0xD8007100 0x200>;
-	interrupts = <1>;
-};
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index a9707da..e28cbe0 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -255,6 +255,7 @@ config USB_EHCI_ATH79
 
 config USB_EHCI_HCD_PLATFORM
 	tristate "Generic EHCI driver for a platform device"
+	depends on !PPC_OF
 	default n
 	---help---
 	  Adds an EHCI host driver for a generic platform device, which
diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index 7f30b71..d8aebc0 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -3,6 +3,7 @@
  *
  * Copyright 2007 Steven Brown <sbrown-aLUkz7fEuXBWk0Htik3J/w@public.gmane.org>
  * Copyright 2010-2012 Hauke Mehrtens <hauke-5/S+JYg5SzeELgA04lAiVw@public.gmane.org>
+ * Copyright 2014 Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
  *
  * Derived from the ohci-ssb driver
  * Copyright 2007 Michael Buesch <m@bues.ch>
@@ -18,6 +19,7 @@
  *
  * Licensed under the GNU/GPL. See COPYING for details.
  */
+#include <linux/clk.h>
 #include <linux/dma-mapping.h>
 #include <linux/err.h>
 #include <linux/kernel.h>
@@ -25,6 +27,7 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
@@ -33,6 +36,13 @@
 #include "ehci.h"
 
 #define DRIVER_DESC "EHCI generic platform driver"
+#define EHCI_MAX_CLKS 3
+#define hcd_to_ehci_priv(h) ((struct ehci_platform_priv *)hcd_to_ehci(h)->priv)
+
+struct ehci_platform_priv {
+	struct clk *clks[EHCI_MAX_CLKS];
+	struct phy *phy;
+};
 
 static const char hcd_name[] = "ehci-platform";
 
@@ -64,38 +74,90 @@ static int ehci_platform_reset(struct usb_hcd *hcd)
 	return 0;
 }
 
+static int ehci_platform_power_on(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
+	int clk, ret;
+
+	for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++) {
+		ret = clk_prepare_enable(priv->clks[clk]);
+		if (ret)
+			goto err_disable_clks;
+	}
+
+	if (priv->phy) {
+		ret = phy_init(priv->phy);
+		if (ret)
+			goto err_disable_clks;
+
+		ret = phy_power_on(priv->phy);
+		if (ret)
+			goto err_exit_phy;
+	}
+
+	return 0;
+
+err_exit_phy:
+	phy_exit(priv->phy);
+err_disable_clks:
+	while (--clk >= 0)
+		clk_disable_unprepare(priv->clks[clk]);
+
+	return ret;
+}
+
+static void ehci_platform_power_off(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
+	int clk;
+
+	if (priv->phy) {
+		phy_power_off(priv->phy);
+		phy_exit(priv->phy);
+	}
+
+	for (clk = EHCI_MAX_CLKS - 1; clk >= 0; clk--)
+		if (priv->clks[clk])
+			clk_disable_unprepare(priv->clks[clk]);
+}
+
 static struct hc_driver __read_mostly ehci_platform_hc_driver;
 
 static const struct ehci_driver_overrides platform_overrides __initconst = {
-	.reset =	ehci_platform_reset,
+	.reset =		ehci_platform_reset,
+	.extra_priv_size =	sizeof(struct ehci_platform_priv),
 };
 
-static struct usb_ehci_pdata ehci_platform_defaults;
+static struct usb_ehci_pdata ehci_platform_defaults = {
+	.power_on =		ehci_platform_power_on,
+	.power_suspend =	ehci_platform_power_off,
+	.power_off =		ehci_platform_power_off,
+};
 
 static int ehci_platform_probe(struct platform_device *dev)
 {
 	struct usb_hcd *hcd;
 	struct resource *res_mem;
-	struct usb_ehci_pdata *pdata;
-	int irq;
-	int err;
+	struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
+	struct ehci_platform_priv *priv;
+	int err, irq, clk = 0;
 
 	if (usb_disabled())
 		return -ENODEV;
 
 	/*
-	 * use reasonable defaults so platforms don't have to provide these.
-	 * with DT probing on ARM, none of these are set.
+	 * Use reasonable defaults so platforms don't have to provide these
+	 * with DT probing on ARM.
 	 */
-	if (!dev_get_platdata(&dev->dev))
-		dev->dev.platform_data = &ehci_platform_defaults;
+	if (!pdata)
+		pdata = &ehci_platform_defaults;
 
 	err = dma_coerce_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));
 	if (err)
 		return err;
 
-	pdata = dev_get_platdata(&dev->dev);
-
 	irq = platform_get_irq(dev, 0);
 	if (irq < 0) {
 		dev_err(&dev->dev, "no irq provided");
@@ -107,17 +169,40 @@ static int ehci_platform_probe(struct platform_device *dev)
 		return -ENXIO;
 	}
 
+	hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev,
+			     dev_name(&dev->dev));
+	if (!hcd)
+		return -ENOMEM;
+
+	platform_set_drvdata(dev, hcd);
+	dev->dev.platform_data = pdata;
+	priv = hcd_to_ehci_priv(hcd);
+
+	if (pdata == &ehci_platform_defaults && dev->dev.of_node) {
+		priv->phy = devm_phy_get(&dev->dev, "usb");
+		if (IS_ERR(priv->phy)) {
+			err = PTR_ERR(priv->phy);
+			if (err == -EPROBE_DEFER)
+				goto err_put_hcd;
+			priv->phy = NULL;
+		}
+
+		for (clk = 0; clk < EHCI_MAX_CLKS; clk++) {
+			priv->clks[clk] = of_clk_get(dev->dev.of_node, clk);
+			if (IS_ERR(priv->clks[clk])) {
+				err = PTR_ERR(priv->clks[clk]);
+				if (err == -EPROBE_DEFER)
+					goto err_put_clks;
+				priv->clks[clk] = NULL;
+				break;
+			}
+		}
+	}
+
 	if (pdata->power_on) {
 		err = pdata->power_on(dev);
 		if (err < 0)
-			return err;
-	}
-
-	hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev,
-			     dev_name(&dev->dev));
-	if (!hcd) {
-		err = -ENOMEM;
-		goto err_power;
+			goto err_put_clks;
 	}
 
 	hcd->rsrc_start = res_mem->start;
@@ -126,21 +211,25 @@ static int ehci_platform_probe(struct platform_device *dev)
 	hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
 	if (IS_ERR(hcd->regs)) {
 		err = PTR_ERR(hcd->regs);
-		goto err_put_hcd;
+		goto err_power;
 	}
 	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (err)
-		goto err_put_hcd;
-
-	platform_set_drvdata(dev, hcd);
+		goto err_power;
 
 	return err;
 
-err_put_hcd:
-	usb_put_hcd(hcd);
 err_power:
 	if (pdata->power_off)
 		pdata->power_off(dev);
+err_put_clks:
+	while (--clk >= 0)
+		clk_put(priv->clks[clk]);
+err_put_hcd:
+	if (pdata == &ehci_platform_defaults)
+		dev->dev.platform_data = NULL;
+
+	usb_put_hcd(hcd);
 
 	return err;
 }
@@ -149,13 +238,19 @@ static int ehci_platform_remove(struct platform_device *dev)
 {
 	struct usb_hcd *hcd = platform_get_drvdata(dev);
 	struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
+	struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
+	int clk;
 
 	usb_remove_hcd(hcd);
-	usb_put_hcd(hcd);
 
 	if (pdata->power_off)
 		pdata->power_off(dev);
 
+	for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++)
+		clk_put(priv->clks[clk]);
+
+	usb_put_hcd(hcd);
+
 	if (pdata == &ehci_platform_defaults)
 		dev->dev.platform_data = NULL;
 
@@ -206,8 +301,10 @@ static int ehci_platform_resume(struct device *dev)
 static const struct of_device_id vt8500_ehci_ids[] = {
 	{ .compatible = "via,vt8500-ehci", },
 	{ .compatible = "wm,prizm-ehci", },
+	{ .compatible = "usb-ehci", },
 	{}
 };
+MODULE_DEVICE_TABLE(of, vt8500_ehci_ids);
 
 static const struct platform_device_id ehci_platform_table[] = {
 	{ "ehci-platform", 0 },
-- 
1.8.5.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v8 3/4] ohci-platform: Add support for controllers with big-endian regs / descriptors
       [not found] ` <1390419177-6481-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
  2014-01-22 19:32   ` [PATCH v8 1/4] ohci-platform: Add support for devicetree instantiation Hans de Goede
  2014-01-22 19:32   ` [PATCH v8 2/4] ehci-platform: Add support for clks and phy passed through devicetree Hans de Goede
@ 2014-01-22 19:32   ` Hans de Goede
       [not found]     ` <1390419177-6481-4-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
  2014-01-22 19:32   ` [PATCH v8 4/4] ehci-platform: " Hans de Goede
  3 siblings, 1 reply; 6+ messages in thread
From: Hans de Goede @ 2014-01-22 19:32 UTC (permalink / raw)
  To: Alan Stern
  Cc: Florian Fainelli, linux-usb,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree,
	Hans de Goede

Note this commit uses the same devicetree booleans for this as the ones
already existing in the usb-ehci bindings, see:
Documentation/devicetree/bindings/usb/usb-ehci.txt

Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
 Documentation/devicetree/bindings/usb/usb-ohci.txt |  3 +++
 drivers/usb/host/ohci-platform.c                   | 27 ++++++++++++++++++++++
 2 files changed, 30 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt
index 6ba38d9..6933b0c 100644
--- a/Documentation/devicetree/bindings/usb/usb-ohci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt
@@ -6,6 +6,9 @@ Required properties:
 - interrupts : ohci controller interrupt
 
 Optional properties:
+- big-endian-regs : boolean, set this for hcds with big-endian registers
+- big-endian-desc : boolean, set this for hcds with big-endian descriptors
+- big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
 - clocks : a list of phandle + clock specifier pairs
 - phys : phandle + phy specifier pair
 - phy-names : "usb"
diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
index b2d0e1e..71e9d8e 100644
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -128,6 +128,7 @@ static int ohci_platform_probe(struct platform_device *dev)
 	struct resource *res_mem;
 	struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
 	struct ohci_platform_priv *priv;
+	struct ohci_hcd *ohci;
 	int err, irq, clk = 0;
 
 	if (usb_disabled())
@@ -164,8 +165,34 @@ static int ohci_platform_probe(struct platform_device *dev)
 	platform_set_drvdata(dev, hcd);
 	dev->dev.platform_data = pdata;
 	priv = hcd_to_ohci_priv(hcd);
+	ohci = hcd_to_ohci(hcd);
 
 	if (pdata == &ohci_platform_defaults && dev->dev.of_node) {
+		if (of_property_read_bool(dev->dev.of_node, "big-endian-regs"))
+			ohci->flags |= OHCI_QUIRK_BE_MMIO;
+
+		if (of_property_read_bool(dev->dev.of_node, "big-endian-desc"))
+			ohci->flags |= OHCI_QUIRK_BE_DESC;
+
+		if (of_property_read_bool(dev->dev.of_node, "big-endian"))
+			ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC;
+
+#ifndef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
+		if (ohci->flags & OHCI_QUIRK_BE_MMIO) {
+			dev_err(&dev->dev,
+				"Error big-endian-regs not compiled in\n");
+			err = -EINVAL;
+			goto err_put_hcd;
+		}
+#endif
+#ifndef CONFIG_USB_OHCI_BIG_ENDIAN_DESC
+		if (ohci->flags & OHCI_QUIRK_BE_DESC) {
+			dev_err(&dev->dev,
+				"Error big-endian-desc not compiled in\n");
+			err = -EINVAL;
+			goto err_put_hcd;
+		}
+#endif
 		priv->phy = devm_phy_get(&dev->dev, "usb");
 		if (IS_ERR(priv->phy)) {
 			err = PTR_ERR(priv->phy);
-- 
1.8.5.3

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v8 4/4] ehci-platform: Add support for controllers with big-endian regs / descriptors
       [not found] ` <1390419177-6481-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
                     ` (2 preceding siblings ...)
  2014-01-22 19:32   ` [PATCH v8 3/4] ohci-platform: Add support for controllers with big-endian regs / descriptors Hans de Goede
@ 2014-01-22 19:32   ` Hans de Goede
  3 siblings, 0 replies; 6+ messages in thread
From: Hans de Goede @ 2014-01-22 19:32 UTC (permalink / raw)
  To: Alan Stern
  Cc: Florian Fainelli, linux-usb,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree,
	Hans de Goede

This uses the already documented devicetree booleans for this, see:
Documentation/devicetree/bindings/usb/usb-ehci.txt

Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
 drivers/usb/host/ehci-platform.c | 33 +++++++++++++++++++++++++++++++--
 1 file changed, 31 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index d8aebc0..5888abb 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -55,8 +55,10 @@ static int ehci_platform_reset(struct usb_hcd *hcd)
 
 	hcd->has_tt = pdata->has_tt;
 	ehci->has_synopsys_hc_bug = pdata->has_synopsys_hc_bug;
-	ehci->big_endian_desc = pdata->big_endian_desc;
-	ehci->big_endian_mmio = pdata->big_endian_mmio;
+	if (pdata->big_endian_desc)
+		ehci->big_endian_desc = 1;
+	if (pdata->big_endian_mmio)
+		ehci->big_endian_mmio = 1;
 
 	if (pdata->pre_setup) {
 		retval = pdata->pre_setup(hcd);
@@ -142,6 +144,7 @@ static int ehci_platform_probe(struct platform_device *dev)
 	struct resource *res_mem;
 	struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
 	struct ehci_platform_priv *priv;
+	struct ehci_hcd *ehci;
 	int err, irq, clk = 0;
 
 	if (usb_disabled())
@@ -177,8 +180,34 @@ static int ehci_platform_probe(struct platform_device *dev)
 	platform_set_drvdata(dev, hcd);
 	dev->dev.platform_data = pdata;
 	priv = hcd_to_ehci_priv(hcd);
+	ehci = hcd_to_ehci(hcd);
 
 	if (pdata == &ehci_platform_defaults && dev->dev.of_node) {
+		if (of_property_read_bool(dev->dev.of_node, "big-endian-regs"))
+			ehci->big_endian_mmio = 1;
+
+		if (of_property_read_bool(dev->dev.of_node, "big-endian-desc"))
+			ehci->big_endian_desc = 1;
+
+		if (of_property_read_bool(dev->dev.of_node, "big-endian"))
+			ehci->big_endian_mmio = ehci->big_endian_desc = 1;
+
+#ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
+		if (ehci->big_endian_mmio) {
+			dev_err(&dev->dev,
+				"Error big-endian-regs not compiled in\n");
+			err = -EINVAL;
+			goto err_put_hcd;
+		}
+#endif
+#ifndef CONFIG_USB_EHCI_BIG_ENDIAN_DESC
+		if (ehci->big_endian_desc) {
+			dev_err(&dev->dev,
+				"Error big-endian-desc not compiled in\n");
+			err = -EINVAL;
+			goto err_put_hcd;
+		}
+#endif
 		priv->phy = devm_phy_get(&dev->dev, "usb");
 		if (IS_ERR(priv->phy)) {
 			err = PTR_ERR(priv->phy);
-- 
1.8.5.3

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 6+ messages in thread

* Re: [PATCH v8 3/4] ohci-platform: Add support for controllers with big-endian regs / descriptors
       [not found]     ` <1390419177-6481-4-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
@ 2014-01-22 20:46       ` Sergei Shtylyov
  0 siblings, 0 replies; 6+ messages in thread
From: Sergei Shtylyov @ 2014-01-22 20:46 UTC (permalink / raw)
  To: Hans de Goede, Alan Stern
  Cc: Florian Fainelli, linux-usb,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, devicetree

Hello.

On 01/22/2014 10:32 PM, Hans de Goede wrote:

> Note this commit uses the same devicetree booleans for this as the ones
> already existing in the usb-ehci bindings, see:
> Documentation/devicetree/bindings/usb/usb-ehci.txt

> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
[...]

> diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
> index b2d0e1e..71e9d8e 100644
> --- a/drivers/usb/host/ohci-platform.c
> +++ b/drivers/usb/host/ohci-platform.c
[...]
> @@ -164,8 +165,34 @@ static int ohci_platform_probe(struct platform_device *dev)
[...]
> +#ifndef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
> +		if (ohci->flags & OHCI_QUIRK_BE_MMIO) {
> +			dev_err(&dev->dev,
> +				"Error big-endian-regs not compiled in\n");
> +			err = -EINVAL;
> +			goto err_put_hcd;
> +		}
> +#endif
> +#ifndef CONFIG_USB_OHCI_BIG_ENDIAN_DESC
> +		if (ohci->flags & OHCI_QUIRK_BE_DESC) {
> +			dev_err(&dev->dev,
> +				"Error big-endian-desc not compiled in\n");

    Small grammar nits (sorry): some punctuation like comma or semicolon 
wouldn't hurt after "Error" word here and above. The same for ehci-platfrom.c. 
Also, "support" word wouldn't hurt after the property names in the same message.

WBR, Sergei


--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2014-01-22 20:46 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-01-22 19:32 [PATCH v8 0/4] ohci and ehci-platform clks, phy, be and dt support Hans de Goede
     [not found] ` <1390419177-6481-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-01-22 19:32   ` [PATCH v8 1/4] ohci-platform: Add support for devicetree instantiation Hans de Goede
2014-01-22 19:32   ` [PATCH v8 2/4] ehci-platform: Add support for clks and phy passed through devicetree Hans de Goede
2014-01-22 19:32   ` [PATCH v8 3/4] ohci-platform: Add support for controllers with big-endian regs / descriptors Hans de Goede
     [not found]     ` <1390419177-6481-4-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-01-22 20:46       ` Sergei Shtylyov
2014-01-22 19:32   ` [PATCH v8 4/4] ehci-platform: " Hans de Goede

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).