Re: [PATCH v4 07/18] watchdog: orion: Handle IRQ

[Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>]

On 01/22/2014 03:05 PM, Ezequiel Garcia wrote:
> DT-enabled where an irqchip driver for the brigde interrupt controller is
> available can handle the watchdog IRQ properly. Therefore, we request
> the interruption and add a dummy handler that merely calls panic().
>
> This is done in order to have an initial 'ack' of the interruption,
> which clears the watchdog state.
>
> Furthermore, since some platforms don't have such IRQ, this commit
> makes the interruption specification optional.
>
> Signed-off-by: Ezequiel Garcia <ezequiel.garcia-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
> ---
>   .../devicetree/bindings/watchdog/marvel.txt        |  2 ++
>   drivers/watchdog/orion_wdt.c                       | 24 +++++++++++++++++++++-
>   2 files changed, 25 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/watchdog/marvel.txt b/Documentation/devicetree/bindings/watchdog/marvel.txt
> index 5dc8d30..0731fbd 100644
> --- a/Documentation/devicetree/bindings/watchdog/marvel.txt
> +++ b/Documentation/devicetree/bindings/watchdog/marvel.txt
> @@ -7,6 +7,7 @@ Required Properties:
>
>   Optional properties:
>
> +- interrupts	: Contains the IRQ for watchdog expiration
>   - timeout-sec	: Contains the watchdog timeout in seconds
>
>   Example:
> @@ -14,6 +15,7 @@ Example:
>   	wdt@20300 {
>   		compatible = "marvell,orion-wdt";
>   		reg = <0x20300 0x28>;
> +		interrupts = <3>;
>   		timeout-sec = <10>;
>   		status = "okay";
>   	};
> diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c
> index 2dbeee9..f5e7b17 100644
> --- a/drivers/watchdog/orion_wdt.c
> +++ b/drivers/watchdog/orion_wdt.c
> @@ -19,6 +19,7 @@
>   #include <linux/platform_device.h>
>   #include <linux/watchdog.h>
>   #include <linux/init.h>
> +#include <linux/interrupt.h>
>   #include <linux/io.h>
>   #include <linux/clk.h>
>   #include <linux/err.h>
> @@ -109,10 +110,16 @@ static struct watchdog_device orion_wdt = {
>   	.min_timeout = 1,
>   };
>
> +static irqreturn_t orion_wdt_irq(int irq, void *devid)
> +{
> +	panic("Watchdog Timeout");
> +	return IRQ_HANDLED;
> +}
> +
>   static int orion_wdt_probe(struct platform_device *pdev)
>   {
>   	struct resource *res;
> -	int ret;
> +	int ret, irq;
>
>   	clk = devm_clk_get(&pdev->dev, NULL);
>   	if (IS_ERR(clk)) {
> @@ -145,6 +152,21 @@ static int orion_wdt_probe(struct platform_device *pdev)
>   	/* Let's make sure the watchdog is fully stopped */
>   	orion_wdt_stop(&orion_wdt);
>
> +	/* It's important to request the IRQ once the watchdog is disabled */

s/once/only after/

> +	irq = platform_get_irq(pdev, 0);
> +	if (irq >= 0) {
> +		/*
> +		 * Not all supported platforms specify an interruption for the

s/interruption/interrupt pin/ (or interrupt)

Nitpicks, so

Reviewed-by: Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html