From mboxrd@z Thu Jan 1 00:00:00 1970 From: Santosh Shilimkar Subject: Re: [PATCH v3 0/4] ARM: keystone: enable gpio support Date: Mon, 10 Feb 2014 10:53:42 -0500 Message-ID: <52F8F606.3020107@ti.com> References: <1392050481-19086-1-git-send-email-grygorii.strashko@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1392050481-19086-1-git-send-email-grygorii.strashko-l0cyMroinI0@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Grygorii Strashko , Rob Herring Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, ivan.khoronzhuk-l0cyMroinI0@public.gmane.org, Grant Likely , Mark Rutland List-Id: devicetree@vger.kernel.org On Monday 10 February 2014 11:41 AM, Grygorii Strashko wrote: > This series adds Keystone GPIO IP definition in DT and enable GPIO support in > Keystone configuration file. > > Also, it enables LEDs support for Keystone 2 K2H EVM as specified in board > schematic. For more information see: > - http://www.advantech.com/Support/TI-EVM/EVMK2HX.aspx > > Changes in v3: > - rebased on top 3.14 + "[PATCH v2] arm: dts: keystone: add watchdog entry" > http://www.spinics.net/lists/devicetree/msg20211.html > > [v1-v2] http://www.spinics.net/lists/arm-kernel/msg294655.html > > Grygorii Strashko (4): > ARM: dts: keystone: add gpio device entry > ARM: dts: keystone-evm: add leds supports > ARM: keystone_defconfig: enable gpio support > ARM: keystone_defconfig: enable led support > Thanks for reposting the patchset Grygorii. I will take them for the 3.15. Would be good to get the blessing from DT folks on first two patches. Regards, Santosh -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html