Re: [PATCH v2 2/3] usb: chipidea: msm: Add device tree support

[Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>]

Hello.

On 02/19/2014 12:34 AM, Courtney Cavin wrote:

>>>>> From: "Ivan T. Ivanov" <iivanov@mm-sol.com>

>>>>> Allows controller to be specified via device tree.
>>>>> Pass PHY phandle specified in DT to core driver.

>>>>> Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
>>>>> ---
>>>>>     drivers/usb/chipidea/ci_hdrc_msm.c |   23 ++++++++++++++++++++++-
>>>>>     1 file changed, 22 insertions(+), 1 deletion(-)

>>>>       You also need to describe the binding you're creating in
>>>> Documentation/devicetree/bindings/usb/<file>.txt.

>>> Did you check "[PATCH v2 1/3]"?

>>      Did you send it to 'linux-usb'? I just didn't get the patch.
>> (Typically, the bindings are described in the same patch the DT support is
>> added to the driver bu YMMV, of course.)

> Although I would personally agree that this is the most logical method,
> it would appear that the DT guys disagree with us [1].  Lately, they

    Thank you for the reference.

> seem to have either given up or are otherwise preoccupied, so perhaps
> you can still slip a few patches by them. ;)

    Yeah, I was at last able to get my Ethernet driver bindings applied. :-)

> -Courtney

> [1] https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/submitting-patches.txt

WBR, Sergei