From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sergei Shtylyov Subject: Re: [PATCH] of_mdio: fix phy interrupt passing Date: Wed, 19 Feb 2014 23:18:52 +0300 Message-ID: <530511AC.7030907@cogentembedded.com> References: <1392654580-3706-1-git-send-email-ben.dooks@codethink.co.uk> <530249EF.4060803@codethink.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Sender: linux-sh-owner@vger.kernel.org To: Florian Fainelli , Ben Dooks Cc: Grant Likely , linux-kernel , "devicetree@vger.kernel.org" , "linux-kernel@vger.kernel.org" , netdev , Linux-sh list List-Id: devicetree@vger.kernel.org Hello. On 02/17/2014 08:48 PM, Florian Fainelli wrote: >>>> The of_mdiobus_register_phy() is not setting phy->irq this causing >>>> some drivers to incorrectly assume that the PHY does not have an >>>> IRQ associated with it or install an interrupt handler for the >>>> PHY. >>>> Simplify the code setting irq and set the phy->irq at the same >>>> time so that the case if mdio->irq is not NULL is easier to read. >>> The real bug fix, which is not properly explained here, is that >>> irq_of_parse_and_map() should return values > 0 when the interrupt is >>> valid, so this makes me wonder why we are not propagating the return >>> value from irq_of_parse_and_map() in case the call to >>> of_irq_parse_one() does return something non-zero? >> No, the first issue is phy->dev never gets set, which causes the >> issue. The cleanup was added as it seemed easier to put it in with >> this. > Ok, that really needs to be mentioned in the commit message, even > being quite familiar (and possibly dumb too) with the code, I could > not figure this out by reading your patch. Yes, the main issue was that phy->irq wasn't overridden from the value set by phy_device_create(). >> I think phy->irq is already initialised to PHY_POLL and thus there >> is no need to set phy->irq if the irq_of_parse_and_map() fails. > That is correct, the reason why I introduced 7d97637 ("net: of_mdio: > do not overwrite PHY interrupt configuration") was that you are also > allowed to change the irq type before calling into > of_mdiobus_register(), Not really: of_mdiobus_register() init's all of mdio->irq[] with IRQ_POLL, thus wiping out all of the previous initialization, so I don't know what you did achieve with the aforementioned commit. > so we want to preserve other irq values being > set here, such as PHY_IGNORE_INTERRUPT. Your patch does take care of > that since it only overrides the irq in case we could parse it. And it should have stayed that way. The latter change was unnecessary. WBR, Sergei