[PATCH] ARM: tegra: add device tree for SHIELD

[PATCH] ARM: tegra: add device tree for SHIELD

[Alexandre Courbot]

Add a device tree for NVIDIA SHIELD. The set of enabled features is
still minimal with no display option (although HDMI should be easy
to get to work) and USB requiring external power.

A default kernel command-line as well as initrd addresses are hardcoded
to match the static values the bootloader is known to use. This allows
booting from an appended DTB without having to alter it at boot time,
since the bootloader has no Device Tree support.

Signed-off-by: Alexandre Courbot <acourbot-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
 arch/arm/boot/dts/Makefile          |    1 +
 arch/arm/boot/dts/tegra114-roth.dts | 1087 +++++++++++++++++++++++++++++++++++
 2 files changed, 1088 insertions(+)
 create mode 100644 arch/arm/boot/dts/tegra114-roth.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 2f1c2184732b..8f00bf0d4128 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -338,6 +338,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
 	tegra30-cardhu-a02.dtb \
 	tegra30-cardhu-a04.dtb \
 	tegra114-dalmore.dtb \
+	tegra114-roth.dtb \
 	tegra124-venice2.dtb
 dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \
 	versatile-pb.dtb
diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts
new file mode 100644
index 000000000000..f66d75d35702
--- /dev/null
+++ b/arch/arm/boot/dts/tegra114-roth.dts
@@ -0,0 +1,1087 @@
+/dts-v1/;
+
+#include "tegra114.dtsi"
+
+/ {
+	model = "NVIDIA SHIELD";
+	compatible = "nvidia,roth", "nvidia,tegra114";
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 console=tty1 gpt fbcon=rotate:1";
+		linux,initrd-start = <0x82000000>;
+		linux,initrd-end = <0x82800000>;
+	};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
+	memory {
+		reg = <0x80000000 0x79600000>;
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			clk1_out_pw4 {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2",
+						"dap1_fs_pn0",
+						"dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5",
+						"dap2_fs_pa2",
+						"dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_din_pp5 {
+				nvidia,pins = "dap4_din_pp5",
+						"dap4_dout_pp6",
+						"dap4_fs_pp4",
+						"dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dvfs_pwm_px0 {
+				nvidia,pins = "dvfs_pwm_px0",
+						"dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0",
+						"ulpi_data0_po1",
+						"ulpi_data1_po2",
+						"ulpi_data2_po3",
+						"ulpi_data3_po4",
+						"ulpi_data4_po5",
+						"ulpi_data5_po6",
+						"ulpi_data6_po7",
+						"ulpi_data7_po0";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1",
+						"ulpi_nxt_py2";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+						"cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0",
+						"pbb0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+						"gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_a16_pj7 {
+				nvidia,pins = "gmi_a16_pj7",
+						"gmi_a19_pk7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_a17_pb0 {
+				nvidia,pins = "gmi_a17_pb0",
+						"gmi_a18_pb1";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad5_pg5 {
+				nvidia,pins = "gmi_ad5_pg5",
+						"gmi_wr_n_pi0";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad6_pg6 {
+				nvidia,pins = "gmi_ad6_pg6",
+						"gmi_ad7_pg7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad12_ph4 {
+				nvidia,pins = "gmi_ad12_ph4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_cs6_n_pi13 {
+				nvidia,pins = "gmi_cs6_n_pi3";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad9_ph1 {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_cs1_n_pj2 {
+				nvidia,pins = "gmi_cs1_n_pj2",
+						"gmi_oe_n_pi1";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_rst_n_pi4 {
+				nvidia,pins = "gmi_rst_n_pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_iordy_pi5 {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1",
+						"sdmmc1_dat0_py7",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat3_pb4",
+						"sdmmc3_cd_n_pv2",
+						"sdmmc3_clk_lb_out_pee4",
+						"sdmmc3_clk_lb_in_pee5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col4_pq4 {
+				nvidia,pins = "kb_col4_pq4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+						"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "blink";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0",
+						"kb_col1_pq1",
+						"kb_col2_pq2",
+						"kb_row0_pr0",
+						"kb_row1_pr1",
+						"kb_row2_pr2",
+						"kb_row8_ps0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row9_ps1 {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+						"pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sys_clk_req_pz5 {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			reset_out_n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+						"gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_cts_n_pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_rts_n_pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1",
+						"uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0",
+						"uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4",
+						"ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
+			};
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en0_pn4 {
+				nvidia,pins = "usb_vbus_en0_pn4";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x6_aud_px6 {
+				nvidia,pins = "gpio_x6_aud_px6";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x1_aud_px1 {
+				nvidia,pins = "gpio_x1_aud_px1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x7_aud_px7 {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_adv_n_pk0 {
+				nvidia,pins = "gmi_adv_n_pk0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_cs0_n_pj0 {
+				nvidia,pins = "gmi_cs0_n_pj0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x4_aud_px4 {
+				nvidia,pins = "gpio_x4_aud_px4",
+						"gpio_x5_aud_px5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x3_aud_px3 {
+				nvidia,pins = "gpio_x3_aud_px3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_w2_aud_pw2 {
+				nvidia,pins = "gpio_w2_aud_pw2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_w3_aud_pw3 {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0",
+						"dap3_din_pp1",
+						"dap3_dout_pp2",
+						"dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3",
+						"pbb5",
+						"pbb6",
+						"pbb7";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc1 {
+				nvidia,pins = "pcc1",
+						"pcc2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad0_pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+						"gmi_ad1_pg1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad10_ph2 {
+				nvidia,pins = "gmi_ad10_ph2",
+						"gmi_ad12_ph4",
+						"gmi_ad15_ph7",
+						"gmi_cs3_n_pk4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad11_ph3 {
+				nvidia,pins = "gmi_ad11_ph3",
+						"gmi_ad13_ph5",
+						"gmi_ad8_ph0",
+						"gmi_clk_pk1",
+						"gmi_cs2_n_pk3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad14_ph6 {
+				nvidia,pins = "gmi_ad14_ph6",
+						"gmi_cs0_n_pj0",
+						"gmi_cs4_n_pk2",
+						"gmi_cs7_n_pi6",
+						"gmi_dqs_p_pj3",
+						"gmi_wp_n_pc7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad2_pg2 {
+				nvidia,pins = "gmi_ad2_pg2",
+						"gmi_ad3_pg3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_wp_n_pv3 {
+				nvidia,pins = "sdmmc1_wp_n_pv3";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col3_pq3 {
+				nvidia,pins = "kb_col3_pq3";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col5_pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col6_pq6 {
+				nvidia,pins = "kb_col6_pq6",
+						"kb_col7_pq7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3",
+						"kb_row4_pr4",
+						"kb_row6_pr6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <36>;
+				nvidia,pull-up-strength = <20>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>;
+			};
+			drive_sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <36>;
+				nvidia,pull-up-strength = <20>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+			drive_gma {
+				nvidia,pins = "drive_gma";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <2>;
+				nvidia,pull-up-strength = <2>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,drive-type = <1>;
+			};
+		};
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		regulator@43 {
+			compatible = "ti,tps51632";
+			reg = <0x43>;
+			regulator-name = "vdd_cpu";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1520000>;
+			regulator-ramp-delay = <6000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		palmas: pmic@58 {
+			compatible = "ti,palmas";
+			reg = <0x58>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+			ti,irq-externally-inverted;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			palmas_gpio: gpio {
+				compatible = "ti,palmas-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			pmic {
+				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
+
+				regulators {
+					smps12 {
+						regulator-name = "vdd-ddr";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1500000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v8: smps3 {
+						regulator-name = "vdd-1v8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps45 {
+						regulator-name = "vdd-soc";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <1400000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps457 {
+						regulator-name = "vdd-soc";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <1400000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps8 {
+						regulator-name = "avdd-pll-1v05";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_2v85_emmc: smps9 {
+						regulator-name = "vdd-2v85-emmc";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+						regulator-always-on;
+					};
+
+					smps10_out1 {
+						regulator-name = "vdd-fan";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_5v0_sys: smps10_out2 {
+						regulator-name = "vdd-5v0-sys";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_2v8_display: ldo2 {
+						regulator-name = "vdd-2v8-display";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					ldo3 {
+						regulator-name = "avdd-1v2";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo4 {
+						regulator-name = "vpp-fuse";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					ldo5 {
+						regulator-name = "avdd-hdmi-pll";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					ldo6 {
+						regulator-name = "vdd-sensor-2v8";
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					ldo8 {
+						regulator-name = "vdd-rtc";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <1100000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,enable-ldo8-tracking;
+					};
+
+					vddio_sdmmc3: ldo9 {
+						regulator-name = "vddio-sdmmc3";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldousb {
+						regulator-name = "avdd-usb-hdmi";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_3v3_sys: regen1 {
+						regulator-name = "rail-3v3";
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					regen2 {
+						regulator-name = "rail-5v0";
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+				};
+			};
+
+			rtc {
+				compatible = "ti,palmas-rtc";
+				interrupt-parent = <&palmas>;
+				interrupts = <8 0>;
+			};
+
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+	};
+
+	/* Wifi */
+	sdhci@78000000 {
+		status = "okay";
+		bus-width = <4>;
+		broken-cd;
+		keep-power-in-suspend;
+		cap-sdio-irq;
+	};
+
+	/* SD card */
+	sdhci@78000400 {
+		status = "okay";
+		bus-width = <4>;
+		vmmc-supply = <&vddio_sdmmc3>;
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+	};
+
+	/* eMMC */
+	sdhci@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		vmmc-supply = <&vdd_1v8>;
+		non-removable;
+	};
+
+	usb@7d000000 {
+		status = "okay";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		nvidia,xcvr-setup = <7>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		dr_mode = "otg";
+	};
+
+	/* SHIELD controller */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		nvidia,xcvr-setup = <7>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&lcd_bl_en>;
+		pwms = <&pwm 1 40000>;
+
+		brightness-levels = <0 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 255>;
+		default-brightness-level = <8>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		lcd_bl_en: regulator@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "lcd_bl_en";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-boot-on;
+		};
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "vdd_lcd_1v8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			vin-supply = <&vdd_1v8>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+			regulator-boot-on;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			regulator-name = "vdd_3v3_ts";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
+			regulator-always-on;
+		};
+
+		regulator@3 {
+			compatible = "regulator-fixed";
+			regulator-name = "vdd_1v8_com";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			vin-supply = <&vdd_1v8>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		regulator@4 {
+			compatible = "regulator-fixed";
+			regulator-name = "vdd_3v3_com";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			vin-supply = <&vdd_3v3_sys>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};
-- 
1.9.0

Re: [PATCH] ARM: tegra: add device tree for SHIELD

[Stephen Warren]

On 02/24/2014 03:26 AM, Alexandre Courbot wrote:
> Add a device tree for NVIDIA SHIELD. The set of enabled features is
> still minimal with no display option (although HDMI should be easy
> to get to work) and USB requiring external power.

You could add a simple-framebuffer node for now, I think?

> diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts

> +	memory {
> +		reg = <0x80000000 0x79600000>;

It might be worth a comment here pointing out that the rest of RAM is
reserved for some carveouts/..., or at least that these values are set
this way in order to match what the bootloader usually passes to
downstream kernels in the command-line?

> +	i2c@7000d000 {

> +		palmas: pmic@58 {
> +			compatible = "ti,palmas";
> +			reg = <0x58>;
> +			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
> +			ti,irq-externally-inverted;

Unfortunately, the patch I sent to document/implement that last property
hasn't yet been ack'd/applied, so I'll hold off applying this until it has.

> +	/* Wifi */
> +	sdhci@78000000 {
> +		status = "okay";
> +		bus-width = <4>;
> +		broken-cd;
> +		keep-power-in-suspend;
> +		cap-sdio-irq;

Is non-removable better than broken-cd, or are they entirely unrelated?

Should we add broken-cd and/or cap-sdio-irq to the SDIO WiFi on other
boards (Springbank, Ventana, Cardhu)?

> +	usb-phy@7d000000 {
> +		status = "okay";
> +		nvidia,xcvr-setup = <7>;
> +		nvidia,xcvr-lsfslew = <2>;
> +		nvidia,xcvr-lsrslew = <2>;
> +		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
> +		dr_mode = "otg";

While opt is probably accurate, we don't actually support otg upstream,
but only host. While the DT is supposed to represent HW rather than
SW/OS details, I've tried to avoid putting otg into the DT, since I'm
not sure that the DT binding for otg is stable, since we can't test it,
whereas host probably is. Still, this is a pretty minor detail, and we
can ignore that if you want ("otg" evidently /works/ fine on Seaboard,
so it's OK if you keep this).
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] ARM: tegra: add device tree for SHIELD

[Alexandre Courbot]

On 02/25/2014 03:53 AM, Stephen Warren wrote:
> On 02/24/2014 03:26 AM, Alexandre Courbot wrote:
>> Add a device tree for NVIDIA SHIELD. The set of enabled features is
>> still minimal with no display option (although HDMI should be easy
>> to get to work) and USB requiring external power.
>
> You could add a simple-framebuffer node for now, I think?

That would not be useful I'm afraid, since the DSI clocks will be 
switched off in the absence of a dsi DT node in host1x, so you would end 
up with a blank screen. Our best shot at display for the moment would be 
HDMI, but I need to spend some more time on it.

Proper internal panel support would require a panel driver with the 
proper DSI initialization sequences. It is in my pipe.

>> diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts
>
>> +	memory {
>> +		reg = <0x80000000 0x79600000>;
>
> It might be worth a comment here pointing out that the rest of RAM is
> reserved for some carveouts/..., or at least that these values are set
> this way in order to match what the bootloader usually passes to
> downstream kernels in the command-line?

Yes, absolutely right. On a more general note I feel like DTs could gain 
clarity if they had more comments (e.g. for pinmuxing which are a quite 
heavy block otherwise), do you have any objection to this? (I guess not, 
but so far the rule seems to be "no comment in DT" :P )

>
>> +	i2c@7000d000 {
>
>> +		palmas: pmic@58 {
>> +			compatible = "ti,palmas";
>> +			reg = <0x58>;
>> +			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
>> +			ti,irq-externally-inverted;
>
> Unfortunately, the patch I sent to document/implement that last property
> hasn't yet been ack'd/applied, so I'll hold off applying this until it has.

That's fine, I wanted to avoid sending another patch soon after just for 
that particular change.

>
>> +	/* Wifi */
>> +	sdhci@78000000 {
>> +		status = "okay";
>> +		bus-width = <4>;
>> +		broken-cd;
>> +		keep-power-in-suspend;
>> +		cap-sdio-irq;
>
> Is non-removable better than broken-cd, or are they entirely unrelated?

They are unrelated actually. With non-removable the driver expects the 
device to always be there since boot, and does not check for the card to 
be removed/added after boot. broken-cd indicates there is no CD line and 
the device should be polled regularly.

For the Wifi chip, non-removable would be the correct setting 
hardware-wise, but there is a trap: the chip has its reset line asserted 
at boot-time, and you need to set GPIO 229 to de-assert it. Only after 
that will the device be detected on the SDIO bus. Since it lacks a CD 
line, it must be polled, hence the broken-cd property.

This also raises another, redundant problem with DT bindings: AFAIK we 
currently have no way to let the system know the device will only appear 
after a given GPIO is set. It would also be nice to be able to give some 
parameters to the Wifi driver through the DT (like the OOB interrupt). 
Right now the Wifi chip is brought up by exporting the GPIO and writing 
to it from user-space, and the OOB interrupt is not used.

Otherwise, Wifi works great with the brcmfmac driver and NVRAM file 
extracted from Android.

> Should we add broken-cd and/or cap-sdio-irq to the SDIO WiFi on other
> boards (Springbank, Ventana, Cardhu)?

If they don't have the GPIO requirement that SHIELD has, I don't think 
it is necessary. non-removable is probably a better property for 
soldered Wifi chips.

I'm not sure about cap-sdio-irq, it doesn't seem to make a difference 
for SHIELD Wifi.

>
>> +	usb-phy@7d000000 {
>> +		status = "okay";
>> +		nvidia,xcvr-setup = <7>;
>> +		nvidia,xcvr-lsfslew = <2>;
>> +		nvidia,xcvr-lsrslew = <2>;
>> +		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
>> +		dr_mode = "otg";
>
> While opt is probably accurate, we don't actually support otg upstream,
> but only host. While the DT is supposed to represent HW rather than
> SW/OS details, I've tried to avoid putting otg into the DT, since I'm
> not sure that the DT binding for otg is stable, since we can't test it,
> whereas host probably is. Still, this is a pretty minor detail, and we
> can ignore that if you want ("otg" evidently /works/ fine on Seaboard,
> so it's OK if you keep this).

The setting works for me and the binding is documented, so maybe we can 
keep it as-is?

Thanks for the review - v2 will be on the way, as well as Tegra Note 7 
hopefully.

Alex.

Re: [PATCH] ARM: tegra: add device tree for SHIELD

[Arend van Spriel]

On 02/25/2014 03:13 AM, Alexandre Courbot wrote:
>>
>>> +    /* Wifi */
>>> +    sdhci@78000000 {
>>> +        status = "okay";
>>> +        bus-width = <4>;
>>> +        broken-cd;
>>> +        keep-power-in-suspend;
>>> +        cap-sdio-irq;
>>
>> Is non-removable better than broken-cd, or are they entirely unrelated?
> 
> They are unrelated actually. With non-removable the driver expects the
> device to always be there since boot, and does not check for the card to
> be removed/added after boot. broken-cd indicates there is no CD line and
> the device should be polled regularly.
> 
> For the Wifi chip, non-removable would be the correct setting
> hardware-wise, but there is a trap: the chip has its reset line asserted
> at boot-time, and you need to set GPIO 229 to de-assert it. Only after
> that will the device be detected on the SDIO bus. Since it lacks a CD
> line, it must be polled, hence the broken-cd property.
> 
> This also raises another, redundant problem with DT bindings: AFAIK we
> currently have no way to let the system know the device will only appear
> after a given GPIO is set. It would also be nice to be able to give some
> parameters to the Wifi driver through the DT (like the OOB interrupt).
> Right now the Wifi chip is brought up by exporting the GPIO and writing
> to it from user-space, and the OOB interrupt is not used.

Hi Alexandre,

I recently posted a proposal for brcmfmac DT binding [1]. I did receive
some comments, but it would be great if you (and/or others involved) had
a look at it as well and give me some feedback. DT work still needs to
grow on me.

> Otherwise, Wifi works great with the brcmfmac driver and NVRAM file
> extracted from Android.

With in-band interrupts, indeed. The HOST_WAKE signal is the OOB
interrupt which would need to be provided in the device-tree.

Regards,
Arend

[1] http://mid.gmane.org/1392059868-8782-1-git-send-email-arend-dY08KVG/lbpWk0Htik3J/w@public.gmane.org

Re: [PATCH] ARM: tegra: add device tree for SHIELD

[Stephen Warren]

On 02/24/2014 07:13 PM, Alexandre Courbot wrote:
> On 02/25/2014 03:53 AM, Stephen Warren wrote:
>> On 02/24/2014 03:26 AM, Alexandre Courbot wrote:
>>> Add a device tree for NVIDIA SHIELD. The set of enabled features is
>>> still minimal with no display option (although HDMI should be easy
>>> to get to work) and USB requiring external power.

>>> diff --git a/arch/arm/boot/dts/tegra114-roth.dts
>>> b/arch/arm/boot/dts/tegra114-roth.dts
>>
>>> +    memory {
>>> +        reg = <0x80000000 0x79600000>;
>>
>> It might be worth a comment here pointing out that the rest of RAM is
>> reserved for some carveouts/..., or at least that these values are set
>> this way in order to match what the bootloader usually passes to
>> downstream kernels in the command-line?
> 
> Yes, absolutely right. On a more general note I feel like DTs could gain
> clarity if they had more comments (e.g. for pinmuxing which are a quite
> heavy block otherwise), do you have any objection to this? (I guess not,
> but so far the rule seems to be "no comment in DT" :P )

I have no objection in particular. Specifically for pinmux, the values
seem pretty obvious, so I'm not sure what extra the comment could
convey, but I'll take a look at any proposed patch:-)

>>> +    /* Wifi */
>>> +    sdhci@78000000 {
>>> +        status = "okay";
>>> +        bus-width = <4>;
>>> +        broken-cd;
>>> +        keep-power-in-suspend;
>>> +        cap-sdio-irq;
>>
>> Is non-removable better than broken-cd, or are they entirely unrelated?
> 
> They are unrelated actually. With non-removable the driver expects the
> device to always be there since boot, and does not check for the card to
> be removed/added after boot. broken-cd indicates there is no CD line and
> the device should be polled regularly.

It doesn't sound like that's what we want either; we should know exactly
when the device is added/removed, based on when the relevant
clocks/supplies/... are turned on/off.

> For the Wifi chip, non-removable would be the correct setting
> hardware-wise, but there is a trap: the chip has its reset line asserted
> at boot-time, and you need to set GPIO 229 to de-assert it. Only after
> that will the device be detected on the SDIO bus. Since it lacks a CD
> line, it must be polled, hence the broken-cd property.

How does that GPIO get manipulated right now? I assume you must be
manually configuring it via sysfs after boot or something? If so,
perhaps it's best to just leave out the WiFi node until it works
automatically.

> This also raises another, redundant problem with DT bindings: AFAIK we
> currently have no way to let the system know the device will only appear
> after a given GPIO is set. It would also be nice to be able to give some
> parameters to the Wifi driver through the DT (like the OOB interrupt).
> Right now the Wifi chip is brought up by exporting the GPIO and writing
> to it from user-space, and the OOB interrupt is not used.

There was a thread on this topic on LAKML recently. I didn't really
follow it, so I don't know if there was a useful resolution. I think it
was "mmc: add support for power-on sequencing through DT", although
there may have been other related threads. It was possibly tangentially
related to power-sequences-in-DT...

...
> I'm not sure about cap-sdio-irq, it doesn't seem to make a difference
> for SHIELD Wifi.

I'd tend to leave it out then.

Re: [PATCH] ARM: tegra: add device tree for SHIELD

[Alexandre Courbot]

On 02/25/2014 06:52 PM, Arend van Spriel wrote:
> On 02/25/2014 03:13 AM, Alexandre Courbot wrote:
>>>
>>>> +    /* Wifi */
>>>> +    sdhci@78000000 {
>>>> +        status = "okay";
>>>> +        bus-width = <4>;
>>>> +        broken-cd;
>>>> +        keep-power-in-suspend;
>>>> +        cap-sdio-irq;
>>>
>>> Is non-removable better than broken-cd, or are they entirely unrelated?
>>
>> They are unrelated actually. With non-removable the driver expects the
>> device to always be there since boot, and does not check for the card to
>> be removed/added after boot. broken-cd indicates there is no CD line and
>> the device should be polled regularly.
>>
>> For the Wifi chip, non-removable would be the correct setting
>> hardware-wise, but there is a trap: the chip has its reset line asserted
>> at boot-time, and you need to set GPIO 229 to de-assert it. Only after
>> that will the device be detected on the SDIO bus. Since it lacks a CD
>> line, it must be polled, hence the broken-cd property.
>>
>> This also raises another, redundant problem with DT bindings: AFAIK we
>> currently have no way to let the system know the device will only appear
>> after a given GPIO is set. It would also be nice to be able to give some
>> parameters to the Wifi driver through the DT (like the OOB interrupt).
>> Right now the Wifi chip is brought up by exporting the GPIO and writing
>> to it from user-space, and the OOB interrupt is not used.
>
> Hi Alexandre,
>
> I recently posted a proposal for brcmfmac DT binding [1]. I did receive
> some comments, but it would be great if you (and/or others involved) had
> a look at it as well and give me some feedback. DT work still needs to
> grow on me.

Hi Arend, (and thanks again for all the help with getting the chip to work!)

Great, I'm not subscribed to the devicetree list and so have missed this 
thread, but I'm glad to see it.

I don't think I have much to add to the comments you already received 
there. I'd need it to reference the 32K clock (which I currently 
force-enable manually), the OOB interrupt, and the reset pin as a GPIO 
(as for SHIELD the device needs to be put out of reset using an 
active-low GPIO before anything can happen). That last property could be 
optional as I suspect most designs won't use it.

Getting the device out of reset should be done before the bus probes the 
non-removable device, so I wonder how this would fit wrt. the DT 
power-on sequencing series by Olof. Something tells me this could rather 
be a property of the bus, but physically speaking the pin is connected 
to the wifi chip, so... Maybe we could get the platform driver to ask 
the bus to probe again after enabling power/getting the device out of reset?

Re: [PATCH] ARM: tegra: add device tree for SHIELD

[Alexandre Courbot]

On 02/26/2014 07:38 AM, Stephen Warren wrote:
> On 02/24/2014 07:13 PM, Alexandre Courbot wrote:
>> On 02/25/2014 03:53 AM, Stephen Warren wrote:
>>> On 02/24/2014 03:26 AM, Alexandre Courbot wrote:
>>>> Add a device tree for NVIDIA SHIELD. The set of enabled features is
>>>> still minimal with no display option (although HDMI should be easy
>>>> to get to work) and USB requiring external power.
>
>>>> diff --git a/arch/arm/boot/dts/tegra114-roth.dts
>>>> b/arch/arm/boot/dts/tegra114-roth.dts
>>>
>>>> +    memory {
>>>> +        reg = <0x80000000 0x79600000>;
>>>
>>> It might be worth a comment here pointing out that the rest of RAM is
>>> reserved for some carveouts/..., or at least that these values are set
>>> this way in order to match what the bootloader usually passes to
>>> downstream kernels in the command-line?
>>
>> Yes, absolutely right. On a more general note I feel like DTs could gain
>> clarity if they had more comments (e.g. for pinmuxing which are a quite
>> heavy block otherwise), do you have any objection to this? (I guess not,
>> but so far the rule seems to be "no comment in DT" :P )
>
> I have no objection in particular. Specifically for pinmux, the values
> seem pretty obvious, so I'm not sure what extra the comment could
> convey, but I'll take a look at any proposed patch:-)

It would just make grouping of related pins according more visible than 
having to look at the "nvidia,function" property currently does - just a 
little added comfort.

>>>> +    /* Wifi */
>>>> +    sdhci@78000000 {
>>>> +        status = "okay";
>>>> +        bus-width = <4>;
>>>> +        broken-cd;
>>>> +        keep-power-in-suspend;
>>>> +        cap-sdio-irq;
>>>
>>> Is non-removable better than broken-cd, or are they entirely unrelated?
>>
>> They are unrelated actually. With non-removable the driver expects the
>> device to always be there since boot, and does not check for the card to
>> be removed/added after boot. broken-cd indicates there is no CD line and
>> the device should be polled regularly.
>
> It doesn't sound like that's what we want either; we should know exactly
> when the device is added/removed, based on when the relevant
> clocks/supplies/... are turned on/off.

Yes, I guess this will require a proper DT binding like what Arend proposed.

>> For the Wifi chip, non-removable would be the correct setting
>> hardware-wise, but there is a trap: the chip has its reset line asserted
>> at boot-time, and you need to set GPIO 229 to de-assert it. Only after
>> that will the device be detected on the SDIO bus. Since it lacks a CD
>> line, it must be polled, hence the broken-cd property.
>
> How does that GPIO get manipulated right now? I assume you must be
> manually configuring it via sysfs after boot or something? If so,
> perhaps it's best to just leave out the WiFi node until it works
> automatically.

The GPIO needs to be set from user-space, yes. But if we leave the Wifi 
node out, I'm concerned that wireless will not be usable at all, 
wouldn't it?

>> This also raises another, redundant problem with DT bindings: AFAIK we
>> currently have no way to let the system know the device will only appear
>> after a given GPIO is set. It would also be nice to be able to give some
>> parameters to the Wifi driver through the DT (like the OOB interrupt).
>> Right now the Wifi chip is brought up by exporting the GPIO and writing
>> to it from user-space, and the OOB interrupt is not used.
>
> There was a thread on this topic on LAKML recently. I didn't really
> follow it, so I don't know if there was a useful resolution. I think it
> was "mmc: add support for power-on sequencing through DT", although
> there may have been other related threads. It was possibly tangentially
> related to power-sequences-in-DT...
>
> ...
>> I'm not sure about cap-sdio-irq, it doesn't seem to make a difference
>> for SHIELD Wifi.
>
> I'd tend to leave it out then.

I will check whether it helps with the latency issues I have noticed and 
remove it if it doesn't.

Thanks,
Alex.

Re: [PATCH] ARM: tegra: add device tree for SHIELD

[Stephen Warren]

On 02/25/2014 09:58 PM, Alexandre Courbot wrote:
> On 02/26/2014 07:38 AM, Stephen Warren wrote:
>> On 02/24/2014 07:13 PM, Alexandre Courbot wrote:
>>> On 02/25/2014 03:53 AM, Stephen Warren wrote:
>>>> On 02/24/2014 03:26 AM, Alexandre Courbot wrote:
>>>>> Add a device tree for NVIDIA SHIELD. The set of enabled features is
>>>>> still minimal with no display option (although HDMI should be easy
>>>>> to get to work) and USB requiring external power.
...
>>> For the Wifi chip, non-removable would be the correct setting
>>> hardware-wise, but there is a trap: the chip has its reset line asserted
>>> at boot-time, and you need to set GPIO 229 to de-assert it. Only after
>>> that will the device be detected on the SDIO bus. Since it lacks a CD
>>> line, it must be polled, hence the broken-cd property.
>>
>> How does that GPIO get manipulated right now? I assume you must be
>> manually configuring it via sysfs after boot or something? If so,
>> perhaps it's best to just leave out the WiFi node until it works
>> automatically.
> 
> The GPIO needs to be set from user-space, yes. But if we leave the Wifi
> node out, I'm concerned that wireless will not be usable at all,
> wouldn't it?

True, but if we have no representation of the device in DT that works
without manually enabling clocks and/or GPIOs, it's not a
complete/accurate representation of the HW, so it doesn't make sense to
add it to DT. Yes, I admit that sucks.

Re: [PATCH] ARM: tegra: add device tree for SHIELD

[Alexandre Courbot]

On 02/26/2014 02:02 PM, Stephen Warren wrote:
> On 02/25/2014 09:58 PM, Alexandre Courbot wrote:
>> On 02/26/2014 07:38 AM, Stephen Warren wrote:
>>> On 02/24/2014 07:13 PM, Alexandre Courbot wrote:
>>>> On 02/25/2014 03:53 AM, Stephen Warren wrote:
>>>>> On 02/24/2014 03:26 AM, Alexandre Courbot wrote:
>>>>>> Add a device tree for NVIDIA SHIELD. The set of enabled features is
>>>>>> still minimal with no display option (although HDMI should be easy
>>>>>> to get to work) and USB requiring external power.
> ...
>>>> For the Wifi chip, non-removable would be the correct setting
>>>> hardware-wise, but there is a trap: the chip has its reset line asserted
>>>> at boot-time, and you need to set GPIO 229 to de-assert it. Only after
>>>> that will the device be detected on the SDIO bus. Since it lacks a CD
>>>> line, it must be polled, hence the broken-cd property.
>>>
>>> How does that GPIO get manipulated right now? I assume you must be
>>> manually configuring it via sysfs after boot or something? If so,
>>> perhaps it's best to just leave out the WiFi node until it works
>>> automatically.
>>
>> The GPIO needs to be set from user-space, yes. But if we leave the Wifi
>> node out, I'm concerned that wireless will not be usable at all,
>> wouldn't it?
>
> True, but if we have no representation of the device in DT that works
> without manually enabling clocks and/or GPIOs, it's not a
> complete/accurate representation of the HW, so it doesn't make sense to
> add it to DT. Yes, I admit that sucks.

Well, I can always enable it in my out-of-tree branch until we can push 
the complete binding in mainline, so I'm ok with taking it out of this 
patch for now.

Re: [PATCH] ARM: tegra: add device tree for SHIELD

[Arend van Spriel]

On 02/26/2014 05:52 AM, Alexandre Courbot wrote:
> On 02/25/2014 06:52 PM, Arend van Spriel wrote:
>> On 02/25/2014 03:13 AM, Alexandre Courbot wrote:
>>>>
>>>>> +    /* Wifi */
>>>>> +    sdhci@78000000 {
>>>>> +        status = "okay";
>>>>> +        bus-width = <4>;
>>>>> +        broken-cd;
>>>>> +        keep-power-in-suspend;
>>>>> +        cap-sdio-irq;
>>>>
>>>> Is non-removable better than broken-cd, or are they entirely unrelated?
>>>
>>> They are unrelated actually. With non-removable the driver expects the
>>> device to always be there since boot, and does not check for the card to
>>> be removed/added after boot. broken-cd indicates there is no CD line and
>>> the device should be polled regularly.
>>>
>>> For the Wifi chip, non-removable would be the correct setting
>>> hardware-wise, but there is a trap: the chip has its reset line asserted
>>> at boot-time, and you need to set GPIO 229 to de-assert it. Only after
>>> that will the device be detected on the SDIO bus. Since it lacks a CD
>>> line, it must be polled, hence the broken-cd property.
>>>
>>> This also raises another, redundant problem with DT bindings: AFAIK we
>>> currently have no way to let the system know the device will only appear
>>> after a given GPIO is set. It would also be nice to be able to give some
>>> parameters to the Wifi driver through the DT (like the OOB interrupt).
>>> Right now the Wifi chip is brought up by exporting the GPIO and writing
>>> to it from user-space, and the OOB interrupt is not used.
>>
>> Hi Alexandre,
>>
>> I recently posted a proposal for brcmfmac DT binding [1]. I did receive
>> some comments, but it would be great if you (and/or others involved) had
>> a look at it as well and give me some feedback. DT work still needs to
>> grow on me.
> 
> Hi Arend, (and thanks again for all the help with getting the chip to
> work!)
> 
> Great, I'm not subscribed to the devicetree list and so have missed this
> thread, but I'm glad to see it.
> 
> I don't think I have much to add to the comments you already received
> there. I'd need it to reference the 32K clock (which I currently
> force-enable manually), the OOB interrupt, and the reset pin as a GPIO
> (as for SHIELD the device needs to be put out of reset using an
> active-low GPIO before anything can happen). That last property could be
> optional as I suspect most designs won't use it.
> 
> Getting the device out of reset should be done before the bus probes the
> non-removable device, so I wonder how this would fit wrt. the DT
> power-on sequencing series by Olof. Something tells me this could rather
> be a property of the bus, but physically speaking the pin is connected
> to the wifi chip, so... Maybe we could get the platform driver to ask
> the bus to probe again after enabling power/getting the device out of
> reset?

Actually, brcmfmac provides a platform driver and a sdio driver. At the
end of the platform probe it registers the sdio driver, which will
trigger the bus to probe again. I am not sure how that would relate to
the DT power-on sequencing you mentioned.

Regards,
Arend

[PATCH] ARM: tegra: add device tree for SHIELD

[Alexandre Courbot]

Add a device tree for NVIDIA SHIELD. The set of enabled features is
still minimal with no display option and USB requiring external power.

A default kernel command-line as well as initrd addresses are hardcoded
to match the static values the bootloader is known to use. This allows
booting from an appended DTB without having to alter it at boot time,
since the bootloader has no Device Tree support.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
---
 arch/arm/boot/dts/Makefile          |    1 +
 arch/arm/boot/dts/tegra114-roth.dts | 1069 +++++++++++++++++++++++++++++++++++
 2 files changed, 1070 insertions(+)
 create mode 100644 arch/arm/boot/dts/tegra114-roth.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index c98f343b47ca..27ca6fd664d0 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -356,6 +356,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
 	tegra30-cardhu-a02.dtb \
 	tegra30-cardhu-a04.dtb \
 	tegra114-dalmore.dtb \
+	tegra114-roth.dtb \
 	tegra124-venice2.dtb
 dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \
 	versatile-pb.dtb
diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts
new file mode 100644
index 000000000000..bb19abeb956a
--- /dev/null
+++ b/arch/arm/boot/dts/tegra114-roth.dts
@@ -0,0 +1,1069 @@
+/dts-v1/;
+
+#include "tegra114.dtsi"
+
+/ {
+	model = "NVIDIA SHIELD";
+	compatible = "nvidia,roth", "nvidia,tegra114";
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 console=tty1 gpt cma=128M fbcon=rotate:1";
+		linux,initrd-start = <0x82000000>;
+		linux,initrd-end = <0x82800000>;
+	};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <2>;
+			tlm,version-minor = <8>;
+		};
+	};
+
+	memory {
+		/* memory >= 0x79600000 is reserved for firmware usage */
+		reg = <0x80000000 0x79600000>;
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			clk1_out_pw4 {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap1_din_pn1 {
+				nvidia,pins = "dap1_din_pn1";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_dout_pn2 {
+				nvidia,pins = "dap1_dout_pn2",
+						"dap1_fs_pn0",
+						"dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_din_pa4 {
+				nvidia,pins = "dap2_din_pa4";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_dout_pa5 {
+				nvidia,pins = "dap2_dout_pa5",
+						"dap2_fs_pa2",
+						"dap2_sclk_pa3";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap4_din_pp5 {
+				nvidia,pins = "dap4_din_pp5",
+						"dap4_dout_pp6",
+						"dap4_fs_pp4",
+						"dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dvfs_pwm_px0 {
+				nvidia,pins = "dvfs_pwm_px0",
+						"dvfs_clk_px2";
+				nvidia,function = "cldvfs";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0",
+						"ulpi_data0_po1",
+						"ulpi_data1_po2",
+						"ulpi_data2_po3",
+						"ulpi_data3_po4",
+						"ulpi_data4_po5",
+						"ulpi_data5_po6",
+						"ulpi_data6_po7",
+						"ulpi_data7_po0";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_dir_py1 {
+				nvidia,pins = "ulpi_dir_py1",
+						"ulpi_nxt_py2";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+						"cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0",
+						"pbb0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+						"gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_a16_pj7 {
+				nvidia,pins = "gmi_a16_pj7",
+						"gmi_a19_pk7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_a17_pb0 {
+				nvidia,pins = "gmi_a17_pb0",
+						"gmi_a18_pb1";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad5_pg5 {
+				nvidia,pins = "gmi_ad5_pg5",
+						"gmi_wr_n_pi0";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad6_pg6 {
+				nvidia,pins = "gmi_ad6_pg6",
+						"gmi_ad7_pg7";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad12_ph4 {
+				nvidia,pins = "gmi_ad12_ph4";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_cs6_n_pi13 {
+				nvidia,pins = "gmi_cs6_n_pi3";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad9_ph1 {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_cs1_n_pj2 {
+				nvidia,pins = "gmi_cs1_n_pj2",
+						"gmi_oe_n_pi1";
+				nvidia,function = "soc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_rst_n_pi4 {
+				nvidia,pins = "gmi_rst_n_pi4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_iordy_pi5 {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_cmd_pz1 {
+				nvidia,pins = "sdmmc1_cmd_pz1",
+						"sdmmc1_dat0_py7",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat3_py4";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat3_pb4",
+						"sdmmc3_cd_n_pv2",
+						"sdmmc3_clk_lb_out_pee4",
+						"sdmmc3_clk_lb_in_pee5";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col4_pq4 {
+				nvidia,pins = "kb_col4_pq4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+						"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "blink";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0",
+						"kb_col1_pq1",
+						"kb_col2_pq2",
+						"kb_row0_pr0",
+						"kb_row1_pr1",
+						"kb_row2_pr2",
+						"kb_row8_ps0";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row10_ps2 {
+				nvidia,pins = "kb_row10_ps2";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row9_ps1 {
+				nvidia,pins = "kb_row9_ps1";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+						"pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			sys_clk_req_pz5 {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			core_pwr_req {
+				nvidia,pins = "core_pwr_req";
+				nvidia,function = "pwron";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			cpu_pwr_req {
+				nvidia,pins = "cpu_pwr_req";
+				nvidia,function = "cpu";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_int_n {
+				nvidia,pins = "pwr_int_n";
+				nvidia,function = "pmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			reset_out_n {
+				nvidia,pins = "reset_out_n";
+				nvidia,function = "reset_out_n";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+						"gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_cts_n_pj5 {
+				nvidia,pins = "uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_rts_n_pj6 {
+				nvidia,pins = "uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2";
+				nvidia,function = "irda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1",
+						"uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0",
+						"uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4",
+						"ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
+			};
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+			};
+			usb_vbus_en0_pn4 {
+				nvidia,pins = "usb_vbus_en0_pn4";
+				nvidia,function = "usb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,lock = <TEGRA_PIN_DISABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x6_aud_px6 {
+				nvidia,pins = "gpio_x6_aud_px6";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x1_aud_px1 {
+				nvidia,pins = "gpio_x1_aud_px1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x7_aud_px7 {
+				nvidia,pins = "gpio_x7_aud_px7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_adv_n_pk0 {
+				nvidia,pins = "gmi_adv_n_pk0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_cs0_n_pj0 {
+				nvidia,pins = "gmi_cs0_n_pj0";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gpio_x4_aud_px4 {
+				nvidia,pins = "gpio_x4_aud_px4",
+						"gpio_x5_aud_px5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_x3_aud_px3 {
+				nvidia,pins = "gpio_x3_aud_px3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_w2_aud_pw2 {
+				nvidia,pins = "gpio_w2_aud_pw2";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gpio_w3_aud_pw3 {
+				nvidia,pins = "gpio_w3_aud_pw3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0",
+						"dap3_din_pp1",
+						"dap3_dout_pp2",
+						"dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv1 {
+				nvidia,pins = "pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3",
+						"pbb5",
+						"pbb6",
+						"pbb7";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pcc1 {
+				nvidia,pins = "pcc1",
+						"pcc2";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad0_pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+						"gmi_ad1_pg1";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad10_ph2 {
+				nvidia,pins = "gmi_ad10_ph2",
+						"gmi_ad12_ph4",
+						"gmi_ad15_ph7",
+						"gmi_cs3_n_pk4";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad11_ph3 {
+				nvidia,pins = "gmi_ad11_ph3",
+						"gmi_ad13_ph5",
+						"gmi_ad8_ph0",
+						"gmi_clk_pk1",
+						"gmi_cs2_n_pk3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad14_ph6 {
+				nvidia,pins = "gmi_ad14_ph6",
+						"gmi_cs0_n_pj0",
+						"gmi_cs4_n_pk2",
+						"gmi_cs7_n_pi6",
+						"gmi_dqs_p_pj3",
+						"gmi_wp_n_pc7";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad2_pg2 {
+				nvidia,pins = "gmi_ad2_pg2",
+						"gmi_ad3_pg3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_wp_n_pv3 {
+				nvidia,pins = "sdmmc1_wp_n_pv3";
+				nvidia,function = "spi4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col3_pq3 {
+				nvidia,pins = "kb_col3_pq3";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col5_pq5 {
+				nvidia,pins = "kb_col5_pq5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col6_pq6 {
+				nvidia,pins = "kb_col6_pq6",
+						"kb_col7_pq7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3",
+						"kb_row4_pr4",
+						"kb_row6_pr6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu2 {
+				nvidia,pins = "pu2";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <36>;
+				nvidia,pull-up-strength = <20>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>;
+			};
+			drive_sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <36>;
+				nvidia,pull-up-strength = <20>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+			drive_gma {
+				nvidia,pins = "drive_gma";
+				nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <2>;
+				nvidia,pull-up-strength = <2>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,drive-type = <1>;
+			};
+		};
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		regulator@43 {
+			compatible = "ti,tps51632";
+			reg = <0x43>;
+			regulator-name = "vdd-cpu";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1520000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		palmas: pmic@58 {
+			compatible = "ti,palmas";
+			reg = <0x58>;
+			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+			ti,irq-externally-inverted;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,system-power-controller;
+
+			palmas_gpio: gpio {
+				compatible = "ti,palmas-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			pmic {
+				compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
+
+				regulators {
+					smps12 {
+						regulator-name = "vdd-ddr";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1500000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v8: smps3 {
+						regulator-name = "vdd-1v8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps457 {
+						regulator-name = "vdd-soc";
+						regulator-min-microvolt = <900000>;
+						regulator-max-microvolt = <1400000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					smps8 {
+						regulator-name = "avdd-pll-1v05";
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_2v85_emmc: smps9 {
+						regulator-name = "vdd-2v85-emmc";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+						regulator-always-on;
+					};
+
+					smps10_out1 {
+						regulator-name = "vdd-fan";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_5v0_sys: smps10_out2 {
+						regulator-name = "vdd-5v0-sys";
+						regulator-min-microvolt = <5000000>;
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_2v8_display: ldo2 {
+						regulator-name = "vdd-2v8-display";
+						regulator-min-microvolt = <2800000>;
+						regulator-max-microvolt = <2800000>;
+					};
+
+					ldo3 {
+						regulator-name = "avdd-1v2";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo4 {
+						regulator-name = "vpp-fuse";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					ldo5 {
+						regulator-name = "avdd-hdmi-pll";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					ldo6 {
+						regulator-name = "vdd-sensor-2v8";
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					ldo8 {
+						regulator-name = "vdd-rtc";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <1100000>;
+						regulator-always-on;
+						regulator-boot-on;
+						ti,enable-ldo8-tracking;
+					};
+
+					vddio_sdmmc3: ldo9 {
+						regulator-name = "vddio-sdmmc3";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldousb {
+						regulator-name = "avdd-usb-hdmi";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_3v3_sys: regen1 {
+						regulator-name = "rail-3v3";
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					regen2 {
+						regulator-name = "rail-5v0";
+						regulator-max-microvolt = <5000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+				};
+			};
+
+			rtc {
+				compatible = "ti,palmas-rtc";
+				interrupt-parent = <&palmas>;
+				interrupts = <8 0>;
+			};
+
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+	};
+
+	/* SD card */
+	sdhci@78000400 {
+		status = "okay";
+		bus-width = <4>;
+		vmmc-supply = <&vddio_sdmmc3>;
+		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+	};
+
+	/* eMMC */
+	sdhci@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		vmmc-supply = <&vdd_1v8>;
+		non-removable;
+	};
+
+	usb@7d000000 {
+		status = "okay";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		nvidia,xcvr-setup = <7>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		dr_mode = "otg";
+	};
+
+	/* SHIELD controller */
+	usb@7d008000 {
+		status = "okay";
+	};
+
+	usb-phy@7d008000 {
+		status = "okay";
+		nvidia,xcvr-setup = <7>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		power-supply = <&lcd_bl_en>;
+		pwms = <&pwm 1 40000>;
+
+		brightness-levels = <0 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 255>;
+		default-brightness-level = <8>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk32k_in: clock {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		lcd_bl_en: regulator@0 {
+			compatible = "regulator-fixed";
+			regulator-name = "lcd_bl_en";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-boot-on;
+		};
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "vdd_lcd_1v8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			vin-supply = <&vdd_1v8>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+			regulator-boot-on;
+		};
+
+		regulator@2 {
+			compatible = "regulator-fixed";
+			regulator-name = "vdd_3v3_ts";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
+			regulator-always-on;
+		};
+
+		regulator@3 {
+			compatible = "regulator-fixed";
+			regulator-name = "vdd_1v8_com";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			vin-supply = <&vdd_1v8>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		regulator@4 {
+			compatible = "regulator-fixed";
+			regulator-name = "vdd_3v3_com";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			vin-supply = <&vdd_3v3_sys>;
+			enable-active-high;
+			gpio = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+	};
+};
-- 
1.9.0

Re: [PATCH] ARM: tegra: add device tree for SHIELD

[Alexandre Courbot]

On 03/03/2014 12:49 PM, Alexandre Courbot wrote:
> Add a device tree for NVIDIA SHIELD. The set of enabled features is
> still minimal with no display option and USB requiring external power.
>
> A default kernel command-line as well as initrd addresses are hardcoded
> to match the static values the bootloader is known to use. This allows
> booting from an appended DTB without having to alter it at boot time,
> since the bootloader has no Device Tree support.
>
> Signed-off-by: Alexandre Courbot <acourbot-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> ---

Forgot to specify this is a v2, apologies for the inconvenience.

Changes since v1:
- Comment on the memory range
- Removed nodes for currently unsupported hardware (i.e. wifi)

Re: [PATCH] ARM: tegra: add device tree for SHIELD

[Stephen Warren]

On 03/02/2014 08:49 PM, Alexandre Courbot wrote:
> Add a device tree for NVIDIA SHIELD. The set of enabled features is
> still minimal with no display option and USB requiring external power.
> 
> A default kernel command-line as well as initrd addresses are hardcoded
> to match the static values the bootloader is known to use. This allows
> booting from an appended DTB without having to alter it at boot time,
> since the bootloader has no Device Tree support.

This and the TN7 patch look fine. Hopefully I'll apply them soon,
pending the ti,irq-externally-inverted discussion.

> +	/* SD card */

Oh, that's all you meant by wanting to add comments? I guess I just
recognize SD-vs-eMMC by the bus width, but adding the comments is a good
idea.

Re: [PATCH] ARM: tegra: add device tree for SHIELD

[Alexandre Courbot]

On 03/04/2014 02:00 AM, Stephen Warren wrote:
> On 03/02/2014 08:49 PM, Alexandre Courbot wrote:
>> Add a device tree for NVIDIA SHIELD. The set of enabled features is
>> still minimal with no display option and USB requiring external power.
>>
>> A default kernel command-line as well as initrd addresses are hardcoded
>> to match the static values the bootloader is known to use. This allows
>> booting from an appended DTB without having to alter it at boot time,
>> since the bootloader has no Device Tree support.
>
> This and the TN7 patch look fine. Hopefully I'll apply them soon,
> pending the ti,irq-externally-inverted discussion.

Great, thanks! That means only small hacks remain in my out-of-tree 
branch. Will make it easier to enable the remaining features (panel, 
Wifi, audio, etc.) from now on.

>
>> +	/* SD card */
>
> Oh, that's all you meant by wanting to add comments? I guess I just
> recognize SD-vs-eMMC by the bus width, but adding the comments is a good
> idea.

Haha no, I actually meant to add small descriptive comments in front of 
each pinmux group, but thinking twice it doesn't seem to bring as much 
readability as I initially thought,

Thanks,
Alex.