Re: [PATCH v3 4/5] regulator: max14577: Add regulator driver for Maxim 14577

[Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>]

Hi,

On Friday, November 22, 2013 09:46:11 AM Krzysztof Kozlowski wrote:

[...]

> +static int max14577_regulator_probe(struct platform_device *pdev)
> +{
> +	struct max14577 *max14577 = dev_get_drvdata(pdev->dev.parent);
> +	struct max14577_platform_data *pdata = dev_get_platdata(max14577->dev);
> +	int i, size;
> +	struct regulator_config config = {};
> +	struct regulator_dev **regulators;
> +
> +	if (!pdata) {
> +		/* Parent must provide pdata */
> +		dev_err(&pdev->dev, "No MFD driver platform data found.\n");
> +		return -ENODEV;
> +	}
> +
> +	if (max14577->dev->of_node) {
> +		int ret = max14577_regulator_dt_parse_pdata(pdev, pdata);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	size = sizeof(struct regulator_dev *) * ARRAY_SIZE(supported_regulators);
> +	regulators = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
> +	if (!regulators) {
> +		dev_err(&pdev->dev, "Cannot allocate memory for regulators\n");
> +		return -ENOMEM;
> +	}
> +
> +	config.dev = &pdev->dev;
> +	config.regmap = max14577->regmap;
> +
> +	for (i = 0; i < ARRAY_SIZE(supported_regulators); i++) {
> +		/*
> +		 * Index of supported_regulators[] is also the id and must
> +		 * match index of pdata->regulators[].
> +		 */
> +		config.init_data = pdata->regulators[i].initdata;
> +		config.of_node = pdata->regulators[i].of_node;
> +
> +		regulators[i] = devm_regulator_register(&pdev->dev,
> +				&supported_regulators[i], &config);
> +		if (IS_ERR(regulators[i])) {
> +			int ret = PTR_ERR(regulators[i]);

This can be cleaned up further.  The code just needs a single "struct
regulator_dev *regulator" (which can be declared inside "for" loop)
instead of an array.

> +			dev_err(&pdev->dev,
> +					"Regulator init failed for ID %d with error: %d\n",
> +					i, ret);
> +			return ret;
> +		}
> +	}
> +
> +	return 0;
> +}

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics