From mboxrd@z Thu Jan 1 00:00:00 1970 From: Roger Quadros Subject: Re: [PATCH 5/5] doc: Add "ti,am437x-dwc3" comaptible for dwc3 glue Date: Thu, 6 Mar 2014 10:55:12 +0200 Message-ID: <531837F0.607@ti.com> References: <1393854834-23810-1-git-send-email-george.cherian@ti.com> <1393854834-23810-6-git-send-email-george.cherian@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1393854834-23810-6-git-send-email-george.cherian@ti.com> Sender: linux-kernel-owner@vger.kernel.org To: George Cherian , linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org, devicetree@vger.kernel.org Cc: anatol.pomozov@gmail.com, gregkh@linuxfoundation.org, balbi@ti.com, kishon@ti.com, rob@landley.net, galak@codeaurora.org, ijc+devicetree@hellion.org.uk, mark.rutland@arm.com, pawel.moll@arm.com, robh+dt@kernel.org, bcousson@baylibre.com, tony@atomide.com List-Id: devicetree@vger.kernel.org On 03/03/2014 03:53 PM, George Cherian wrote: > Add the compatible "ti,am437x-dwc3" for dwc3 glue driver. > > Signed-off-by: George Cherian > --- > Documentation/devicetree/bindings/usb/omap-usb.txt | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) The patch order could be the rearranged so that this appears before the am437x bindings are used. cheers, -roger > > diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt > index c495135..1d38569 100644 > --- a/Documentation/devicetree/bindings/usb/omap-usb.txt > +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt > @@ -44,7 +44,9 @@ Board specific device node entry > }; > > OMAP DWC3 GLUE > - - compatible : Should be "ti,dwc3" > + - compatible : Should be > + * "ti,dwc3" for OMAP5 and DRA7 > + * "ti,am437x-dwc3" for AM437x > - ti,hwmods : Should be "usb_otg_ss" > - reg : Address and length of the register set for the device. > - interrupts : The irq number of this device that is used to interrupt the >