From: Roger Quadros <rogerq@ti.com>
To: kishon@ti.comg, tony@atomide.com, balbi@ti.com
Cc: devicetree@vger.kernel.org, george.cherian@ti.com,
balajitk@ti.com, linux-ide@vger.kernel.org,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
hdegoede@redhat.com, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 00/13] ARM: OMAP: SATA support for OMAP5 & DRA7
Date: Thu, 6 Mar 2014 16:27:56 +0200 [thread overview]
Message-ID: <531885EC.50706@ti.com> (raw)
In-Reply-To: <1394115785-28301-1-git-send-email-rogerq@ti.com>
On 03/06/2014 04:22 PM, Roger Quadros wrote:
> Hi,
>
> This series adds SATA support for OMAP5 uevm and DRA7-evm boards.
>
> - Cleans up the ti-pipe3 PHY driver
> - Adds SATA DPLL support to ti-pipe3 PHY driver
> - Adds SATA nodes to hwmod and SoC DT data
>
> Patches are based on 3.14-rc4 with balbi/next, linux-phy/next and
> omap-for-v3.15/dt merged on top..
>
> To test SATA you will also need [1].
>
> [1] - http://article.gmane.org/gmane.comp.hardware.netbook.arm.sunxi/7285
>
> Changelog:
>
> v2
> - use 'depends on' instead of 'select' OCP2SCP bus driver.
> - Changed DT bindings for dra7-usb2 and am437-usb2 phy.
>
> cheers,
> -roger
>
> ---
> Balaji T K (2):
> ARM: dts: omap5: add sata node
> ARM: dts: dra7: add OCP2SCP3 and SATA nodes
>
> Keshava Munegowda (1):
> ARM: OMAP5: hwmod: Add ocp2scp3 and sata hwmods
>
> Kishon Vijay Abraham I (1):
> phy: rename struct omap_control_usb to struct omap_control_phy
>
> Nikhil Devshatwar (1):
> ARM: DRA7: hwmod: Add ocp2scp3 and sata hwmods
>
> Roger Quadros (8):
> phy: omap-control: Update DT binding information
> phy: omap-control: update dra7 and am437 usb2 bindings
> phy: ti-pipe3: cleanup clock handling
> phy: ti-pipe3: Add SATA DPLL support
> phy: ti-pipe3: Don't get 'wkupclk' and 'refclk' for SATA PHY
> phy: ti-pipe3: streamline PHY operations
> phy: ti-pipe3: Fix suspend/resume and module reload
> phy: omap: Depend on OMAP_OCP2SCP bus driver
>
> Documentation/devicetree/bindings/phy/ti-phy.txt | 40 ++-
> Documentation/devicetree/bindings/usb/omap-usb.txt | 24 --
> arch/arm/boot/dts/dra7.dtsi | 39 +++
> arch/arm/boot/dts/omap5.dtsi | 47 ++-
> arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 73 +++++
> arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 31 +-
> drivers/phy/Kconfig | 16 +-
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-omap-control.c | 320 +++++++++++++++++++++
> drivers/phy/phy-omap-usb2.c | 8 +-
> drivers/phy/phy-ti-pipe3.c | 269 ++++++++++-------
> drivers/usb/musb/omap2430.c | 2 +-
> drivers/usb/phy/Kconfig | 10 -
> drivers/usb/phy/Makefile | 1 -
> drivers/usb/phy/phy-omap-control.c | 319 --------------------
> include/linux/phy/omap_control_phy.h | 89 ++++++
> include/linux/usb/omap_control_usb.h | 89 ------
> 17 files changed, 815 insertions(+), 563 deletions(-)
> create mode 100644 drivers/phy/phy-omap-control.c
> delete mode 100644 drivers/usb/phy/phy-omap-control.c
> create mode 100644 include/linux/phy/omap_control_phy.h
> delete mode 100644 include/linux/usb/omap_control_usb.h
>
oops. forgot to add -M :(.
I'll resend just the 1st patch since it contains the file rename.
updated diffstat is below.
Documentation/devicetree/bindings/phy/ti-phy.txt | 40 ++-
Documentation/devicetree/bindings/usb/omap-usb.txt | 24 --
arch/arm/boot/dts/dra7.dtsi | 39 +++
arch/arm/boot/dts/omap5.dtsi | 47 +++-
arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 73 ++++++
arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 31 ++-
drivers/phy/Kconfig | 16 +-
drivers/phy/Makefile | 1 +
drivers/{usb => }/phy/phy-omap-control.c | 169 ++++++-------
drivers/phy/phy-omap-usb2.c | 8 +-
drivers/phy/phy-ti-pipe3.c | 269 +++++++++++++--------
drivers/usb/musb/omap2430.c | 2 +-
drivers/usb/phy/Kconfig | 10 -
drivers/usb/phy/Makefile | 1 -
.../omap_control_usb.h => phy/omap_control_phy.h} | 36 +--
15 files changed, 509 insertions(+), 257 deletions(-)
rename drivers/{usb => }/phy/phy-omap-control.c (53%)
rename include/linux/{usb/omap_control_usb.h => phy/omap_control_phy.h} (68%)
cheers,
-roger
next prev parent reply other threads:[~2014-03-06 14:27 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-06 14:22 [PATCH v2 00/13] ARM: OMAP: SATA support for OMAP5 & DRA7 Roger Quadros
2014-03-06 14:22 ` [PATCH v2 01/13] phy: rename struct omap_control_usb to struct omap_control_phy Roger Quadros
2014-03-06 14:22 ` [PATCH v2 02/13] phy: omap-control: Update DT binding information Roger Quadros
2014-03-06 14:22 ` [PATCH v2 03/13] phy: omap-control: update dra7 and am437 usb2 bindings Roger Quadros
2014-03-06 14:22 ` [PATCH v2 04/13] phy: ti-pipe3: cleanup clock handling Roger Quadros
2014-03-06 14:22 ` [PATCH v2 05/13] phy: ti-pipe3: Add SATA DPLL support Roger Quadros
2014-03-06 14:22 ` [PATCH v2 06/13] phy: ti-pipe3: Don't get 'wkupclk' and 'refclk' for SATA PHY Roger Quadros
2014-03-06 14:22 ` [PATCH v2 07/13] phy: ti-pipe3: streamline PHY operations Roger Quadros
2014-03-06 14:23 ` [PATCH v2 08/13] phy: ti-pipe3: Fix suspend/resume and module reload Roger Quadros
2014-03-06 14:23 ` [PATCH v2 09/13] phy: omap: Depend on OMAP_OCP2SCP bus driver Roger Quadros
2014-03-06 14:23 ` [PATCH v2 10/13] ARM: OMAP5: hwmod: Add ocp2scp3 and sata hwmods Roger Quadros
2014-03-06 14:23 ` [PATCH v2 11/13] ARM: dts: omap5: add sata node Roger Quadros
2014-03-06 14:23 ` [PATCH v2 12/13] ARM: DRA7: hwmod: Add ocp2scp3 and sata hwmods Roger Quadros
2014-03-06 14:23 ` [PATCH v2 13/13] ARM: dts: dra7: add OCP2SCP3 and SATA nodes Roger Quadros
2014-03-06 14:27 ` Roger Quadros [this message]
2014-03-06 14:30 ` [PATCH v2 01/13][RESEND] phy: rename struct omap_control_usb to struct omap_control_phy Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=531885EC.50706@ti.com \
--to=rogerq@ti.com \
--cc=balajitk@ti.com \
--cc=balbi@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=george.cherian@ti.com \
--cc=hdegoede@redhat.com \
--cc=kishon@ti.comg \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).