From mboxrd@z Thu Jan  1 00:00:00 1970
From: George Cherian <george.cherian@ti.com>
Subject: Re: [PATCH v2 4/5] ARM: dts: am437x-gp-evm: Enable USB
Date: Fri, 7 Mar 2014 16:01:08 +0530
Message-ID: <53199FEC.4020009@ti.com>
References: <1394183758-3821-1-git-send-email-george.cherian@ti.com> <1394183758-3821-5-git-send-email-george.cherian@ti.com> <53199E88.8000800@ti.com>
Mime-Version: 1.0
Content-Type: text/plain; charset="ISO-8859-1"; format=flowed
Content-Transfer-Encoding: 7bit
Return-path: <linux-doc-owner@vger.kernel.org>
In-Reply-To: <53199E88.8000800@ti.com>
Sender: linux-doc-owner@vger.kernel.org
To: Roger Quadros <rogerq@ti.com>, linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org, devicetree@vger.kernel.org, linux-omap@vger.kernel.org
Cc: balbi@ti.com, kishon@ti.com, rob@landley.net, galak@codeaurora.org, ijc+devicetree@hellion.org.uk, mark.rutland@arm.com, pawel.moll@arm.com, robh+dt@kernel.org, tony@atomide.com, anatol.pomozov@gmail.com, bcousson@baylibre.com
List-Id: devicetree@vger.kernel.org

On 3/7/2014 3:55 PM, Roger Quadros wrote:
> Hi George,
>
> On 03/07/2014 11:15 AM, George Cherian wrote:
>> Enable
>> 	- ocp2scp
>> 	- USB PHY control module
>> 	- USB PHY
>> 	- dwc3_omap
>> 	- USB
>> for am437x-gp-evm
>>
>> Signed-off-by: George Cherian <george.cherian@ti.com>
>> ---
>>   arch/arm/boot/dts/am437x-gp-evm.dts | 28 ++++++++++++++++++++++++++++
>>   1 file changed, 28 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
>> index 4eb72b8..1d516a7 100644
>> --- a/arch/arm/boot/dts/am437x-gp-evm.dts
>> +++ b/arch/arm/boot/dts/am437x-gp-evm.dts
>> @@ -98,3 +98,31 @@
>>   &gpio4 {
>>   	status = "okay";
>>   };
>> +
>> +
>> +&usb2_phy1 {
>> +	status = "okay";
>> +};
>> +
>> +&dwc3_1 {
>> +	status = "okay";
>> +};
> Do you need to explicitly enable dwc3_1 nand dwc3_2?

Ahhh... Fixed only in am4372.dtsi
Same with patch 5, I will resend the series fixing it.

>
>> +
>> +&usb1 {
>> +	dr_mode = "peripheral";
>> +	status = "okay";
>> +};
>> +
>> +
>> +&usb2_phy2 {
>> +	status = "okay";
>> +};
>> +
>> +&dwc3_2 {
>> +	status = "okay";
>> +};
>> +
>> +&usb2 {
>> +	dr_mode = "host";
>> +	status = "okay";
>> +};
>>
> cheers,
> -roger


-- 
-George