devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: Thomas Gleixner <tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>
Cc: Maxime Ripard
	<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Subject: Re: [PATCH 1/3] irqchip: sun4i: Don't mask + unmask for the non oneshot case
Date: Fri, 14 Mar 2014 19:42:00 +0100	[thread overview]
Message-ID: <53234D78.5050901@redhat.com> (raw)
In-Reply-To: <alpine.DEB.2.02.1403141228290.18573-3cz04HxQygjZikZi3RtOZ1XZhhPuCNm+@public.gmane.org>

Hi,

On 03/14/2014 12:35 PM, Thomas Gleixner wrote:
> On Thu, 13 Mar 2014, Hans de Goede wrote:
> 
>> Since sun4i and sun5i are single core SOCs there is no need to mask non
>> oneshot IRQs, to achieve this we use handle_fasteoi_irq with a dummy eoi.
> 
> This is slightly wrong :)
> 
> Even on a SMP system there is no need to mask the interrupt when the
> controller works like that sunxi one. If the controller is not broken
> beyond repair then it does not deliver the same interrupt to a
> different cpu. Such a thing would always deliver it to all cores and
> those would race to grab the spinlock and mask it. I've seen such
> horror, but don't ask how that performs.
> 
> The reason why you can spare the mask/unmask dance is that the
> controller does not require any action and clears the interrupt when
> the level goes back to inactive. That happens when the device handler
> acks it at the device level.
> 
> Now there might be the case when the device reactivates the interrupt
> before the RETI. But that does not matter as we run the primary
> interrupt handlers with interrupts disabled.

Ok, I'm going to wait a bit to see if Maxime has anything to say
to this second series, and then I'll do a v2 with the commit msg
fixed.

Regards,

Hans


> 
> Thanks,
> 
> 	tglx
>  
>> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
>> ---
>>  drivers/irqchip/irq-sun4i.c | 11 ++++++++++-
>>  1 file changed, 10 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/irqchip/irq-sun4i.c b/drivers/irqchip/irq-sun4i.c
>> index a0ed1ea..0a71990 100644
>> --- a/drivers/irqchip/irq-sun4i.c
>> +++ b/drivers/irqchip/irq-sun4i.c
>> @@ -74,8 +74,17 @@ static void sun4i_irq_unmask(struct irq_data *irqd)
>>  	       sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(reg));
>>  }
>>  
>> +/*
>> + * Since sun4i and sun5i are single core SOCs there is no need to mask non
>> + * oneshot IRQs, to achieve this we use handle_fasteoi_irq with a dummy eoi.
>> + */
>> +static void sun4i_irq_dummy_eoi(struct irq_data *irqd)
>> +{
>> +}
>> +
>>  static struct irq_chip sun4i_irq_chip = {
>>  	.name		= "sun4i_irq",
>> +	.irq_eoi	= sun4i_irq_dummy_eoi,
>>  	.irq_mask	= sun4i_irq_mask,
>>  	.irq_unmask	= sun4i_irq_unmask,
>>  };
>> @@ -97,7 +106,7 @@ static int sun4i_irq_map(struct irq_domain *d, unsigned int virq,
>>  					 handle_fasteoi_irq);
>>  	else
>>  		irq_set_chip_and_handler(virq, &sun4i_irq_chip,
>> -					 handle_level_irq);
>> +					 handle_fasteoi_irq);
>>  
>>  	set_irq_flags(virq, IRQF_VALID | IRQF_PROBE);
>>  
>> -- 
>> 1.9.0
>>
>>

  parent reply	other threads:[~2014-03-14 18:42 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-13 19:49 [PATCH 0/3] irqchip: sun4i: various cleanups Hans de Goede
     [not found] ` <1394740202-1952-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-03-13 19:50   ` [PATCH 1/3] irqchip: sun4i: Don't mask + unmask for the non oneshot case Hans de Goede
     [not found]     ` <1394740202-1952-2-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-03-14 11:35       ` Thomas Gleixner
     [not found]         ` <alpine.DEB.2.02.1403141228290.18573-3cz04HxQygjZikZi3RtOZ1XZhhPuCNm+@public.gmane.org>
2014-03-14 18:42           ` Hans de Goede [this message]
2014-03-13 19:50   ` [PATCH 2/3] irqchip: sun4i: Simplify irq mapping Hans de Goede
     [not found]     ` <1394740202-1952-3-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-03-17 11:10       ` Maxime Ripard
2014-03-13 19:50   ` [PATCH 3/3] irqchip: sun4i: simplify sun4i_irq_ack Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=53234D78.5050901@redhat.com \
    --to=hdegoede-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
    --cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
    --cc=tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).