From mboxrd@z Thu Jan 1 00:00:00 1970 From: Josh Wu Subject: Re: [PATCH v2 3/3] [media] atmel-isi: add primary DT support Date: Mon, 31 Mar 2014 17:05:13 +0800 Message-ID: <53392FC9.9070706@atmel.com> References: <1395744087-5753-1-git-send-email-josh.wu@atmel.com> <1395744320-15025-1-git-send-email-josh.wu@atmel.com> Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1"; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Sender: linux-media-owner@vger.kernel.org To: Guennadi Liakhovetski Cc: Linux Media Mailing List , m.chehab@samsung.com, nicolas.ferre@atmel.com, linux-arm-kernel@lists.infradead.org, grant.likely@linaro.org, galak@codeaurora.org, rob@landley.net, mark.rutland@arm.com, robh+dt@kernel.org, ijc+devicetree@hellion.org.uk, pawel.moll@arm.com, devicetree@vger.kernel.org, Laurent Pinchart , Ben Dooks List-Id: devicetree@vger.kernel.org Dear Guennadi On 3/31/2014 5:20 AM, Guennadi Liakhovetski wrote: > Hi Josh, > > Please correct me if I'm wrong, but I don't see how this is going to work > without the central part - building asynchronous V4L2 data structures from > the DT, something that your earlier patch Here you mean Bryan Wu not me, right? ;-) Bryan write the patch "[v2] media: soc-camera: OF cameras" in: https://patchwork.linuxtv.org/patch/22288/. And I saw Ben Dooks already sent out his patch to support soc-camera OF now (https://patchwork.linuxtv.org/patch/23304/) which is simpler than Bryan's. > "media: soc-camera: OF cameras" > was doing, but which you stopped developing after a discussion with Ben > (added to Cc). And yes, atmel-isi dt patch should not work without above SoC-Camera of support patch. But as the atmel-isi dt binding document and port node can be finalized. So I think this patch is ready for the mainline. BTW: I will test Ben's patch with atmel-isi. thanks and best regards, Josh Wu > > Thanks > Guennadi > > On Tue, 25 Mar 2014, Josh Wu wrote: > >> This patch add the DT support for Atmel ISI driver. >> It use the same v4l2 DT interface that defined in video-interfaces.txt. >> >> Signed-off-by: Josh Wu >> Cc: devicetree@vger.kernel.org >> --- >> v1 --> v2: >> refine the binding document. >> add port node description. >> removed the optional property. >> >> .../devicetree/bindings/media/atmel-isi.txt | 50 ++++++++++++++++++++ >> drivers/media/platform/soc_camera/atmel-isi.c | 31 +++++++++++- >> 2 files changed, 79 insertions(+), 2 deletions(-) >> create mode 100644 Documentation/devicetree/bindings/media/atmel-isi.txt >> >> diff --git a/Documentation/devicetree/bindings/media/atmel-isi.txt b/Documentation/devicetree/bindings/media/atmel-isi.txt >> new file mode 100644 >> index 0000000..11c98ee >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/media/atmel-isi.txt >> @@ -0,0 +1,50 @@ >> +Atmel Image Sensor Interface (ISI) SoC Camera Subsystem >> +---------------------------------------------- >> + >> +Required properties: >> +- compatible: must be "atmel,at91sam9g45-isi" >> +- reg: physical base address and length of the registers set for the device; >> +- interrupts: should contain IRQ line for the ISI; >> +- clocks: list of clock specifiers, corresponding to entries in >> + the clock-names property; >> +- clock-names: must contain "isi_clk", which is the isi peripherial clock. >> + >> +ISI supports a single port node with parallel bus. It should contain one >> +'port' child node with child 'endpoint' node. Please refer to the bindings >> +defined in Documentation/devicetree/bindings/media/video-interfaces.txt. >> + >> +Example: >> + isi: isi@f0034000 { >> + compatible = "atmel,at91sam9g45-isi"; >> + reg = <0xf0034000 0x4000>; >> + interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>; >> + >> + clocks = <&isi_clk>; >> + clock-names = "isi_clk"; >> + >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_isi>; >> + >> + port { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + isi_0: endpoint { >> + remote-endpoint = <&ov2640_0>; >> + }; >> + }; >> + }; >> + >> + i2c1: i2c@f0018000 { >> + ov2640: camera@0x30 { >> + compatible = "omnivision,ov2640"; >> + reg = <0x30>; >> + >> + port { >> + ov2640_0: endpoint { >> + remote-endpoint = <&isi_0>; >> + bus-width = <8>; >> + }; >> + }; >> + }; >> + }; >> diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c >> index f4add0a..d6a1f7b 100644 >> --- a/drivers/media/platform/soc_camera/atmel-isi.c >> +++ b/drivers/media/platform/soc_camera/atmel-isi.c >> @@ -19,6 +19,7 @@ >> #include >> #include >> #include >> +#include >> #include >> #include >> >> @@ -33,6 +34,7 @@ >> #define VID_LIMIT_BYTES (16 * 1024 * 1024) >> #define MIN_FRAME_RATE 15 >> #define FRAME_INTERVAL_MILLI_SEC (1000 / MIN_FRAME_RATE) >> +#define ISI_DEFAULT_MCLK_FREQ 25000000 >> >> /* Frame buffer descriptor */ >> struct fbd { >> @@ -885,6 +887,20 @@ static int atmel_isi_remove(struct platform_device *pdev) >> return 0; >> } >> >> +static int atmel_isi_probe_dt(struct atmel_isi *isi, >> + struct platform_device *pdev) >> +{ >> + struct device_node *node = pdev->dev.of_node; >> + >> + /* Default settings for ISI */ >> + isi->pdata.full_mode = 1; >> + isi->pdata.mck_hz = ISI_DEFAULT_MCLK_FREQ; >> + isi->pdata.frate = ISI_CFG1_FRATE_CAPTURE_ALL; >> + isi->pdata.data_width_flags = ISI_DATAWIDTH_8 | ISI_DATAWIDTH_10; >> + >> + return 0; >> +} >> + >> static int atmel_isi_probe(struct platform_device *pdev) >> { >> unsigned int irq; >> @@ -896,7 +912,7 @@ static int atmel_isi_probe(struct platform_device *pdev) >> struct isi_platform_data *pdata; >> >> pdata = dev->platform_data; >> - if (!pdata || !pdata->data_width_flags) { >> + if ((!pdata || !pdata->data_width_flags) && !pdev->dev.of_node) { >> dev_err(&pdev->dev, >> "No config available for Atmel ISI\n"); >> return -EINVAL; >> @@ -912,7 +928,11 @@ static int atmel_isi_probe(struct platform_device *pdev) >> if (IS_ERR(isi->pclk)) >> return PTR_ERR(isi->pclk); >> >> - memcpy(&isi->pdata, pdata, sizeof(struct isi_platform_data)); >> + if (pdata) >> + memcpy(&isi->pdata, pdata, sizeof(struct isi_platform_data)); >> + else /* dt probe */ >> + atmel_isi_probe_dt(isi, pdev); >> + >> isi->active = NULL; >> spin_lock_init(&isi->lock); >> INIT_LIST_HEAD(&isi->video_buffer_list); >> @@ -1014,11 +1034,18 @@ err_alloc_ctx: >> return ret; >> } >> >> +static const struct of_device_id atmel_isi_of_match[] = { >> + { .compatible = "atmel,at91sam9g45-isi" }, >> + { } >> +}; >> +MODULE_DEVICE_TABLE(of, atmel_isi_of_match); >> + >> static struct platform_driver atmel_isi_driver = { >> .remove = atmel_isi_remove, >> .driver = { >> .name = "atmel_isi", >> .owner = THIS_MODULE, >> + .of_match_table = atmel_isi_of_match, >> }, >> }; >> >> -- >> 1.7.9.5 >> > --- > Guennadi Liakhovetski, Ph.D. > Freelance Open-Source Software Developer > http://www.open-technology.de/