[PATCH v2 4/6] v4l: vsp1: Add DT support

[PATCH v2 4/6] v4l: vsp1: Add DT support

[Laurent Pinchart]

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>
---
 .../devicetree/bindings/media/renesas,vsp1.txt     | 43 ++++++++++++++++++
 drivers/media/platform/vsp1/vsp1_drv.c             | 52 ++++++++++++++++++----
 2 files changed, 87 insertions(+), 8 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/media/renesas,vsp1.txt

Hi,

This is the last call for DT bindings review, with a small change to the
bindings compared to v1. If I don't get any reply I'll assume that those
(pretty simple) bindings are perfect :-)

Changes since v1:

- Drop the clock-names property, as the VSP1 uses a single clock

diff --git a/Documentation/devicetree/bindings/media/renesas,vsp1.txt b/Documentation/devicetree/bindings/media/renesas,vsp1.txt
new file mode 100644
index 0000000..45c1d3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/renesas,vsp1.txt
@@ -0,0 +1,43 @@
+* Renesas VSP1 Video Processing Engine
+
+The VSP1 is a video processing engine that supports up-/down-scaling, alpha
+blending, color space conversion and various other image processing features.
+It can be found in the Renesas R-Car second generation SoCs.
+
+Required properties:
+
+  - compatible: Must contain "renesas,vsp1"
+
+  - reg: Base address and length of the registers block for the VSP1.
+  - interrupt-parent, interrupts: Specifier for the VSP1 interrupt.
+  - clocks: A phandle + clock-specifier pair for the VSP1 functional clock.
+
+  - renesas,#rpf: Number of Read Pixel Formatter (RPF) modules in the VSP1.
+  - renesas,#uds: Number of Up Down Scaler (UDS) modules in the VSP1.
+  - renesas,#wpf: Number of Write Pixel Formatter (WPF) modules in the VSP1.
+
+
+Optional properties:
+
+  - renesas,has-lif: Boolean, indicates that the LCD Interface (LIF) module is
+    available.
+  - renesas,has-lut: Boolean, indicates that the Look Up Table (LUT) module is
+    available.
+  - renesas,has-sru: Boolean, indicates that the Super Resolution Unit (SRU)
+    module is available.
+
+
+Example: R8A7790 (R-Car H2) VSP1-S node
+
+	vsp1@fe928000 {
+		compatible = "renesas,vsp1";
+		reg = <0 0xfe928000 0 0x8000>;
+		interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>;
+
+		renesas,has-lut;
+		renesas,has-sru;
+		renesas,#rpf = <5>;
+		renesas,#uds = <3>;
+		renesas,#wpf = <4>;
+	};
diff --git a/drivers/media/platform/vsp1/vsp1_drv.c b/drivers/media/platform/vsp1/vsp1_drv.c
index 28e1de3..644650f 100644
--- a/drivers/media/platform/vsp1/vsp1_drv.c
+++ b/drivers/media/platform/vsp1/vsp1_drv.c
@@ -16,6 +16,7 @@
 #include <linux/device.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/videodev2.h>
 
@@ -431,34 +432,59 @@ static const struct dev_pm_ops vsp1_pm_ops = {
  * Platform Driver
  */
 
-static struct vsp1_platform_data *
-vsp1_get_platform_data(struct platform_device *pdev)
+static int vsp1_validate_platform_data(struct platform_device *pdev,
+				       struct vsp1_platform_data *pdata)
 {
-	struct vsp1_platform_data *pdata = pdev->dev.platform_data;
-
 	if (pdata == NULL) {
 		dev_err(&pdev->dev, "missing platform data\n");
-		return NULL;
+		return -EINVAL;
 	}
 
 	if (pdata->rpf_count <= 0 || pdata->rpf_count > VPS1_MAX_RPF) {
 		dev_err(&pdev->dev, "invalid number of RPF (%u)\n",
 			pdata->rpf_count);
-		return NULL;
+		return -EINVAL;
 	}
 
 	if (pdata->uds_count <= 0 || pdata->uds_count > VPS1_MAX_UDS) {
 		dev_err(&pdev->dev, "invalid number of UDS (%u)\n",
 			pdata->uds_count);
-		return NULL;
+		return -EINVAL;
 	}
 
 	if (pdata->wpf_count <= 0 || pdata->wpf_count > VPS1_MAX_WPF) {
 		dev_err(&pdev->dev, "invalid number of WPF (%u)\n",
 			pdata->wpf_count);
-		return NULL;
+		return -EINVAL;
 	}
 
+	return 0;
+}
+
+static struct vsp1_platform_data *
+vsp1_get_platform_data(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct vsp1_platform_data *pdata;
+
+	if (!IS_ENABLED(CONFIG_OF) || np == NULL)
+		return pdev->dev.platform_data;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (pdata == NULL)
+		return NULL;
+
+	if (of_property_read_bool(np, "renesas,has-lif"))
+		pdata->features |= VSP1_HAS_LIF;
+	if (of_property_read_bool(np, "renesas,has-lut"))
+		pdata->features |= VSP1_HAS_LUT;
+	if (of_property_read_bool(np, "renesas,has-sru"))
+		pdata->features |= VSP1_HAS_SRU;
+
+	of_property_read_u32(np, "renesas,#rpf", &pdata->rpf_count);
+	of_property_read_u32(np, "renesas,#uds", &pdata->uds_count);
+	of_property_read_u32(np, "renesas,#wpf", &pdata->wpf_count);
+
 	return pdata;
 }
 
@@ -481,6 +507,10 @@ static int vsp1_probe(struct platform_device *pdev)
 	if (vsp1->pdata == NULL)
 		return -ENODEV;
 
+	ret = vsp1_validate_platform_data(pdev, vsp1->pdata);
+	if (ret < 0)
+		return ret;
+
 	/* I/O, IRQ and clock resources */
 	io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	vsp1->mmio = devm_ioremap_resource(&pdev->dev, io);
@@ -527,6 +557,11 @@ static int vsp1_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id vsp1_of_match[] = {
+	{ .compatible = "renesas,vsp1" },
+	{ },
+};
+
 static struct platform_driver vsp1_platform_driver = {
 	.probe		= vsp1_probe,
 	.remove		= vsp1_remove,
@@ -534,6 +569,7 @@ static struct platform_driver vsp1_platform_driver = {
 		.owner	= THIS_MODULE,
 		.name	= "vsp1",
 		.pm	= &vsp1_pm_ops,
+		.of_match_table = of_match_ptr(vsp1_of_match),
 	},
 };
 
-- 
Regards,

Laurent Pinchart

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 4/6] v4l: vsp1: Add DT support

[Sylwester Nawrocki]

Hi Laurent,

I've got just couple minor comments...

On 04/02/2014 08:01 PM, Laurent Pinchart wrote:
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>
> ---
>   .../devicetree/bindings/media/renesas,vsp1.txt     | 43 ++++++++++++++++++
>   drivers/media/platform/vsp1/vsp1_drv.c             | 52 ++++++++++++++++++----
>   2 files changed, 87 insertions(+), 8 deletions(-)
>   create mode 100644 Documentation/devicetree/bindings/media/renesas,vsp1.txt
>
> Hi,
>
> This is the last call for DT bindings review, with a small change to the
> bindings compared to v1. If I don't get any reply I'll assume that those
> (pretty simple) bindings are perfect :-)
>
> Changes since v1:
>
> - Drop the clock-names property, as the VSP1 uses a single clock
>
> diff --git a/Documentation/devicetree/bindings/media/renesas,vsp1.txt b/Documentation/devicetree/bindings/media/renesas,vsp1.txt
> new file mode 100644
> index 0000000..45c1d3c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/renesas,vsp1.txt
> @@ -0,0 +1,43 @@
> +* Renesas VSP1 Video Processing Engine
> +
> +The VSP1 is a video processing engine that supports up-/down-scaling, alpha
> +blending, color space conversion and various other image processing features.
> +It can be found in the Renesas R-Car second generation SoCs.
> +
> +Required properties:
> +
> +  - compatible: Must contain "renesas,vsp1"
> +
> +  - reg: Base address and length of the registers block for the VSP1.
> +  - interrupt-parent, interrupts: Specifier for the VSP1 interrupt.

I don't think 'interrupt-parent' needs to be documented in this device's
binding, I'd say it belongs more to the interrupt controller binding.
In any case, I would separate interrupt-parent and interrupt properties,
as the former contains a phandle to the parent interrupt controller and
the latter contains the vsp1 interrupt specifier.

I'd humbly suggest to rephrase it to something along the lines of:

      - interrupts: should contain the VSP1 interrupt specifier.

> +  - clocks: A phandle + clock-specifier pair for the VSP1 functional clock.
> +
> +  - renesas,#rpf: Number of Read Pixel Formatter (RPF) modules in the VSP1.
> +  - renesas,#uds: Number of Up Down Scaler (UDS) modules in the VSP1.
> +  - renesas,#wpf: Number of Write Pixel Formatter (WPF) modules in the VSP1.
> +
> +
> +Optional properties:
> +
> +  - renesas,has-lif: Boolean, indicates that the LCD Interface (LIF) module is
> +    available.
> +  - renesas,has-lut: Boolean, indicates that the Look Up Table (LUT) module is
> +    available.
> +  - renesas,has-sru: Boolean, indicates that the Super Resolution Unit (SRU)
> +    module is available.
> +
> +
> +Example: R8A7790 (R-Car H2) VSP1-S node
> +
> +	vsp1@fe928000 {
> +		compatible = "renesas,vsp1";
> +		reg = <0 0xfe928000 0 0x8000>;

These register ranges look suspicious, shouldn't this be just
<0xfe928000 0x8000> ? What is the #address-cells and #size-cells
values for this node ?

> +		interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>;
> +
> +		renesas,has-lut;
> +		renesas,has-sru;
> +		renesas,#rpf = <5>;
> +		renesas,#uds = <3>;
> +		renesas,#wpf = <4>;
> +	};
> diff --git a/drivers/media/platform/vsp1/vsp1_drv.c b/drivers/media/platform/vsp1/vsp1_drv.c
> index 28e1de3..644650f 100644
> --- a/drivers/media/platform/vsp1/vsp1_drv.c
> +++ b/drivers/media/platform/vsp1/vsp1_drv.c
> @@ -16,6 +16,7 @@
>   #include <linux/device.h>
>   #include <linux/interrupt.h>
>   #include <linux/module.h>
> +#include <linux/of.h>
>   #include <linux/platform_device.h>
>   #include <linux/videodev2.h>
>
> @@ -431,34 +432,59 @@ static const struct dev_pm_ops vsp1_pm_ops = {
>    * Platform Driver
>    */
>
> -static struct vsp1_platform_data *
> -vsp1_get_platform_data(struct platform_device *pdev)
> +static int vsp1_validate_platform_data(struct platform_device *pdev,
> +				       struct vsp1_platform_data *pdata)
>   {
> -	struct vsp1_platform_data *pdata = pdev->dev.platform_data;
> -
>   	if (pdata == NULL) {
>   		dev_err(&pdev->dev, "missing platform data\n");
> -		return NULL;
> +		return -EINVAL;
>   	}
>
>   	if (pdata->rpf_count <= 0 || pdata->rpf_count > VPS1_MAX_RPF) {
>   		dev_err(&pdev->dev, "invalid number of RPF (%u)\n",
>   			pdata->rpf_count);
> -		return NULL;
> +		return -EINVAL;
>   	}
>
>   	if (pdata->uds_count <= 0 || pdata->uds_count > VPS1_MAX_UDS) {
>   		dev_err(&pdev->dev, "invalid number of UDS (%u)\n",
>   			pdata->uds_count);
> -		return NULL;
> +		return -EINVAL;
>   	}
>
>   	if (pdata->wpf_count <= 0 || pdata->wpf_count > VPS1_MAX_WPF) {
>   		dev_err(&pdev->dev, "invalid number of WPF (%u)\n",
>   			pdata->wpf_count);
> -		return NULL;
> +		return -EINVAL;
>   	}
>
> +	return 0;
> +}
> +
> +static struct vsp1_platform_data *
> +vsp1_get_platform_data(struct platform_device *pdev)
> +{
> +	struct device_node *np = pdev->dev.of_node;
> +	struct vsp1_platform_data *pdata;
> +
> +	if (!IS_ENABLED(CONFIG_OF) || np == NULL)
> +		return pdev->dev.platform_data;
> +
> +	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
> +	if (pdata == NULL)
> +		return NULL;
> +
> +	if (of_property_read_bool(np, "renesas,has-lif"))
> +		pdata->features |= VSP1_HAS_LIF;
> +	if (of_property_read_bool(np, "renesas,has-lut"))
> +		pdata->features |= VSP1_HAS_LUT;
> +	if (of_property_read_bool(np, "renesas,has-sru"))
> +		pdata->features |= VSP1_HAS_SRU;
> +
> +	of_property_read_u32(np, "renesas,#rpf", &pdata->rpf_count);
> +	of_property_read_u32(np, "renesas,#uds", &pdata->uds_count);
> +	of_property_read_u32(np, "renesas,#wpf", &pdata->wpf_count);
> +
>   	return pdata;
>   }
>
> @@ -481,6 +507,10 @@ static int vsp1_probe(struct platform_device *pdev)
>   	if (vsp1->pdata == NULL)
>   		return -ENODEV;
>
> +	ret = vsp1_validate_platform_data(pdev, vsp1->pdata);
> +	if (ret < 0)
> +		return ret;
> +
>   	/* I/O, IRQ and clock resources */
>   	io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>   	vsp1->mmio = devm_ioremap_resource(&pdev->dev, io);
> @@ -527,6 +557,11 @@ static int vsp1_remove(struct platform_device *pdev)
>   	return 0;
>   }
>
> +static const struct of_device_id vsp1_of_match[] = {
> +	{ .compatible = "renesas,vsp1" },
> +	{ },
> +};
> +
>   static struct platform_driver vsp1_platform_driver = {
>   	.probe		= vsp1_probe,
>   	.remove		= vsp1_remove,
> @@ -534,6 +569,7 @@ static struct platform_driver vsp1_platform_driver = {
>   		.owner	= THIS_MODULE,
>   		.name	= "vsp1",
>   		.pm	= &vsp1_pm_ops,
> +		.of_match_table = of_match_ptr(vsp1_of_match),

Is of_match_ptr() really useful here, when vsp1_of_match[] array
is always compiled in ?

>   	},
>   };

Otherwise this binding indeed looks perfect to me. ;)

--
Regards,
Sylwester
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 4/6] v4l: vsp1: Add DT support

[Laurent Pinchart]

Hi Sylwester,

On Wednesday 02 April 2014 23:37:48 Sylwester Nawrocki wrote:
> Hi Laurent,
> 
> I've got just couple minor comments...

Thank you for your comments.

> On 04/02/2014 08:01 PM, Laurent Pinchart wrote:
> > Signed-off-by: Laurent Pinchart
> > <laurent.pinchart+renesas@ideasonboard.com>
> > ---
> > 
> >  .../devicetree/bindings/media/renesas,vsp1.txt     | 43 +++++++++++++++++
> >  drivers/media/platform/vsp1/vsp1_drv.c             | 52 +++++++++++++----
> >  2 files changed, 87 insertions(+), 8 deletions(-)
> >  create mode 100644
> >  Documentation/devicetree/bindings/media/renesas,vsp1.txt
> > 
> > Hi,
> > 
> > This is the last call for DT bindings review, with a small change to the
> > bindings compared to v1. If I don't get any reply I'll assume that those
> > (pretty simple) bindings are perfect :-)
> > 
> > Changes since v1:
> > 
> > - Drop the clock-names property, as the VSP1 uses a single clock
> > 
> > diff --git a/Documentation/devicetree/bindings/media/renesas,vsp1.txt
> > b/Documentation/devicetree/bindings/media/renesas,vsp1.txt new file mode
> > 100644
> > index 0000000..45c1d3c
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/renesas,vsp1.txt
> > @@ -0,0 +1,43 @@
> > +* Renesas VSP1 Video Processing Engine
> > +
> > +The VSP1 is a video processing engine that supports up-/down-scaling,
> > alpha
> > +blending, color space conversion and various other image processing
> > features.
> > +It can be found in the Renesas R-Car second generation SoCs.
> > +
> > +Required properties:
> > +
> > +  - compatible: Must contain "renesas,vsp1"
> > +
> > +  - reg: Base address and length of the registers block for the VSP1.
> > +  - interrupt-parent, interrupts: Specifier for the VSP1 interrupt.
> 
> I don't think 'interrupt-parent' needs to be documented in this device's
> binding, I'd say it belongs more to the interrupt controller binding.
> In any case, I would separate interrupt-parent and interrupt properties,
> as the former contains a phandle to the parent interrupt controller and
> the latter contains the vsp1 interrupt specifier.
> 
> I'd humbly suggest to rephrase it to something along the lines of:
> 
>       - interrupts: should contain the VSP1 interrupt specifier.

Sure, that sounds good to me. I'll remove the interrupt-parent property.

We should really come up with a standard working for interrupt specifiers and 
use it through all the DT bindings...

> > +  - clocks: A phandle + clock-specifier pair for the VSP1 functional
> > clock.
> > +
> > +  - renesas,#rpf: Number of Read Pixel Formatter (RPF) modules in the
> > VSP1.
> > +  - renesas,#uds: Number of Up Down Scaler (UDS) modules in the> VSP1.
> > +  - renesas,#wpf: Number of Write Pixel Formatter (WPF) modules in the
> > VSP1.
> > +
> > +
> > +Optional properties:
> > +
> > +  - renesas,has-lif: Boolean, indicates that the LCD Interface (LIF)
> > module is +    available.
> > +  - renesas,has-lut: Boolean, indicates that the Look Up Table (LUT)
> > module is +    available.
> > +  - renesas,has-sru: Boolean, indicates that the Super Resolution Unit
> > (SRU) +    module is available.
> > +
> > +
> > +Example: R8A7790 (R-Car H2) VSP1-S node
> > +
> > +	vsp1@fe928000 {
> > +		compatible = "renesas,vsp1";
> > +		reg = <0 0xfe928000 0 0x8000>;
> 
> These register ranges look suspicious, shouldn't this be just
> <0xfe928000 0x8000> ? What is the #address-cells and #size-cells
> values for this node ?

Both #address-cells and #size-cells are equal to 2, the R8A7790 support LPAE.

> > +		interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>;
> > +		clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>;
> > +
> > +		renesas,has-lut;
> > +		renesas,has-sru;
> > +		renesas,#rpf = <5>;
> > +		renesas,#uds = <3>;
> > +		renesas,#wpf = <4>;
> > +	};
> > diff --git a/drivers/media/platform/vsp1/vsp1_drv.c
> > b/drivers/media/platform/vsp1/vsp1_drv.c index 28e1de3..644650f 100644
> > --- a/drivers/media/platform/vsp1/vsp1_drv.c
> > +++ b/drivers/media/platform/vsp1/vsp1_drv.c

[snip]

> > @@ -527,6 +557,11 @@ static int vsp1_remove(struct platform_device *pdev)
> >   	return 0;
> >   }
> > 
> > +static const struct of_device_id vsp1_of_match[] = {
> > +	{ .compatible = "renesas,vsp1" },
> > +	{ },
> > +};
> > +
> >   static struct platform_driver vsp1_platform_driver = {
> >   	.probe		= vsp1_probe,
> >   	.remove		= vsp1_remove,
> > @@ -534,6 +569,7 @@ static struct platform_driver vsp1_platform_driver = {
> >   		.owner	= THIS_MODULE,
> >   		.name	= "vsp1",
> >   		.pm	= &vsp1_pm_ops,
> > +		.of_match_table = of_match_ptr(vsp1_of_match),
> 
> Is of_match_ptr() really useful here, when vsp1_of_match[] array is always
> compiled in ?

Would it be better to compile the vsp1_of_match[] array conditionally ? On the 
other hand the driver is only useful (at least at the moment) on ARM Renesas 
SoCs, which are transitioning to DT anyway.

> >   	},
> >   };
> 
> Otherwise this binding indeed looks perfect to me. ;)

Thank you :-)

-- 
Regards,

Laurent Pinchart

Re: [PATCH v2 4/6] v4l: vsp1: Add DT support

[Sylwester Nawrocki]

Hi Laurent,

On 03/04/14 01:16, Laurent Pinchart wrote:
>>> @@ -534,6 +569,7 @@ static struct platform_driver vsp1_platform_driver = {
>>> > >   		.owner	= THIS_MODULE,
>>> > >   		.name	= "vsp1",
>>> > >   		.pm	= &vsp1_pm_ops,
>>> > > +		.of_match_table = of_match_ptr(vsp1_of_match),
>> > 
>> > Is of_match_ptr() really useful here, when vsp1_of_match[] array is always
>> > compiled in ?
>
> Would it be better to compile the vsp1_of_match[] array conditionally ? On the 
> other hand the driver is only useful (at least at the moment) on ARM Renesas 
> SoCs, which are transitioning to DT anyway.

Given that #ifdefs could be soon removed anyway (when the platform becomes
dt-only) I guess it's better not to introduce it now.

-- 
Regards,
Sylwester
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html