From mboxrd@z Thu Jan 1 00:00:00 1970 From: Roger Quadros Subject: Re: [PATCH 1/1] ARM: dts: omap5: Add clocks to USB3 PHY node Date: Mon, 14 Apr 2014 10:22:43 +0300 Message-ID: <534B8CC3.7050008@ti.com> References: <1396348647-11545-1-git-send-email-rogerq@ti.com> <1396348647-11545-2-git-send-email-rogerq@ti.com> <20140401141308.GB4717@saruman.home> Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20140401141308.GB4717@saruman.home> Sender: linux-kernel-owner@vger.kernel.org To: tony@atomide.com Cc: balbi@ti.com, kishon@ti.com, linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-usb@vger.kernel.org List-Id: devicetree@vger.kernel.org Hi Tony, On 04/01/2014 05:13 PM, Felipe Balbi wrote: > On Tue, Apr 01, 2014 at 01:37:27PM +0300, Roger Quadros wrote: >> The USB3 PHY driver (ti-pipe3) was updated so that the relevant >> clock phandles are expected in the DT node. >> Provide the necessary clocks. >> >> Reported-by: Kishon Vijay Abraham I >> Signed-off-by: Roger Quadros > > Great!!! > > Acked-by: Felipe Balbi Could you please pick this up for 3.15-rc? Thanks. cheers, -roger > >> --- >> arch/arm/boot/dts/omap5.dtsi | 6 ++++++ >> 1 file changed, 6 insertions(+) >> >> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi >> index 757f0b9..4df1e7a 100644 >> --- a/arch/arm/boot/dts/omap5.dtsi >> +++ b/arch/arm/boot/dts/omap5.dtsi >> @@ -794,6 +794,12 @@ >> <0x4a084c00 0x40>; >> reg-names = "phy_rx", "phy_tx", "pll_ctrl"; >> ctrl-module = <&omap_control_usb3phy>; >> + clocks = <&usb_phy_cm_clk32k>, >> + <&sys_clkin>, >> + <&usb_otg_ss_refclk960m>; >> + clock-names = "wkupclk", >> + "sysclk", >> + "refclk"; >> #phy-cells = <0>; >> }; >> }; >> -- >> 1.8.3.2 >> >