From mboxrd@z Thu Jan 1 00:00:00 1970 From: Gregory CLEMENT Subject: Re: [PATCH 4/8] ARM: mvebu: Add USB3 UTMI support Date: Fri, 18 Apr 2014 14:19:49 +0200 Message-ID: <53511865.701@free-electrons.com> References: <1397816563-9000-1-git-send-email-gregory.clement@free-electrons.com> <1397816563-9000-5-git-send-email-gregory.clement@free-electrons.com> <53510A4D.8050706@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <53510A4D.8050706-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Sebastian Hesselbarth Cc: Mathias Nyman , Greg Kroah-Hartman , linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Jason Cooper , Andrew Lunn , Thomas Petazzoni , Ezequiel Garcia , linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Lior Amsalem , Tawfik Bayouk , Nadav Haklai , Grant Likely , Rob Herring , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org Hi Sebastian, On 18/04/2014 13:19, Sebastian Hesselbarth wrote: > On 04/18/2014 12:22 PM, Gregory CLEMENT wrote: >> The usb3-utmi registers allow to configure the internal USB PHY of the >> Armada 380/385 SoCs. A small initialization is needed to be able to use >> the USB3 ports. >> >> Signed-off-by: Gregory CLEMENT >> --- >> arch/arm/mach-mvebu/Makefile | 2 +- >> arch/arm/mach-mvebu/usb-utmi.c | 64 ++++++++++++++++++++++++++++++++++++++++++ > > Gregory, > > there is the generic PHY framework, that could possibly be used to > avoid adding more code to arch/arm/mach-mvebu. Given the very low information I have about UTMI I was a bit reluctant to write a driver. This is, for me, more a platform specific initialization than something which can be used for a driver. However I will have a look on it. > >> 2 files changed, 65 insertions(+), 1 deletion(-) >> create mode 100644 arch/arm/mach-mvebu/usb-utmi.c >> >> diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile >> index a63e43b6b451..2d98a3eeecf6 100644 >> --- a/arch/arm/mach-mvebu/Makefile >> +++ b/arch/arm/mach-mvebu/Makefile >> @@ -4,7 +4,7 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ >> AFLAGS_coherency_ll.o := -Wa,-march=armv7-a >> >> obj-y += system-controller.o mvebu-soc-id.o >> -obj-$(CONFIG_MACH_MVEBU_V7) += board-v7.o >> +obj-$(CONFIG_MACH_MVEBU_V7) += board-v7.o usb-utmi.o >> obj-$(CONFIG_MACH_DOVE) += dove.o >> obj-$(CONFIG_ARCH_MVEBU) += coherency.o coherency_ll.o pmsu.o >> obj-$(CONFIG_SMP) += platsmp.o headsmp.o >> diff --git a/arch/arm/mach-mvebu/usb-utmi.c b/arch/arm/mach-mvebu/usb-utmi.c >> new file mode 100644 >> index 000000000000..e91e86f85eb4 >> --- /dev/null >> +++ b/arch/arm/mach-mvebu/usb-utmi.c >> @@ -0,0 +1,64 @@ >> +/* >> + * USB UTMI support for Armada 38x platform. >> + * >> + * Copyright (C) 2014 Marvell >> + * >> + * Gregory CLEMENT >> + * >> + * This file is licensed under the terms of the GNU General Public >> + * License version 2. This program is licensed "as is" without any >> + * warranty of any kind, whether express or implied. >> + * >> + */ >> + >> +#include >> +#include >> +#include >> +#include >> +#include > > nit: sort alphabetically Right > >> +#define USB_UTMI_PHY_CTRL_STATUS(i) (0x20+i*4) >> +#define USB_UTMI_TX_BITSTUFF_EN BIT(1) >> +#define USB_UTMI_PU_PHY BIT(5) >> +#define USB_UTMI_VBUS_ON_PHY BIT(6) > > nit: two TABs in front of the defines above. Right > >> +static struct of_device_id of_usb_utmi_table[] = { >> + { .compatible = "marvell,armada-380-usb-utmi", }, >> + { /* end of list */ }, >> +}; >> + >> +static int __init mvebu_usb_utmi_init(void) >> +{ >> + struct device_node *np; >> + >> + np = of_find_matching_node(NULL, of_usb_utmi_table); >> + if (np) { >> + void __iomem *usb_utmi_base, *utmi_base; >> + >> + usb_utmi_base = of_iomap(np, 0); >> + BUG_ON(!usb_utmi_base); >> + >> + utmi_base = of_iomap(np, 1); >> + BUG_ON(!utmi_base); >> + >> + writel(USB_UTMI_TX_BITSTUFF_EN | >> + USB_UTMI_PU_PHY | >> + USB_UTMI_VBUS_ON_PHY, >> + usb_utmi_base + USB_UTMI_PHY_CTRL_STATUS(0)); >> + >> + /* >> + * Magic init... the registers and their value are not >> + * documented >> + */ >> + writel(0x40605205, utmi_base); >> + writel(0x409, utmi_base + 4); >> + writel(0x1be7f6f, utmi_base + 0xc); > > nit: decimal/hexadecimal offsets, also IMHO filling the values OK > written with leading zeros improves readability of "magic init" > alot :) Well it still remains magic! But I will do it. Thanks, Gregory -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html