Re: [PATCH 0/8] ARM: at91: sama5d3: enable sound support

[Nicolas Ferre <nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>]

On 17/03/2014 10:45, Bo Shen :
> This patch add sound support on sama5d3xek board.
> 
> This patch series based on the following patch set:
>   clk: at91: better support for the PCKs
>   http://comments.gmane.org/gmane.linux.kernel/1664477
> 
> 
> Bo Shen (5):
>   ARM: at91: sama5d3: add DMA property for SSC devices
>   ARM: at91: sama5d3: disable sound by default
>   ARM: at91: sama5d3: correct the sound compatible string
>   ARM: at91: sama5d3: add the missing property
>   ARM: at91: sama5d3: clock for ssc from rk pin
> 
> Boris BREZILLON (3):
>   ASoC: atmel: support CCF based clks
>   ASoC: atmel: document clock properties of the wm8904 driver
>   ARM: at91/dt: add clock properties to the wm8904 codec node

Hi Voice and Boris,

For this series I am a little bit puzzled: should I take the ASoC part
of it? I see no acknowledgement from Mark and I also read some messages
still discussing about CCF and wm8904 afterwards.

So, I take the 5 patches by Voice Shen and tell me what is the proper
sequence with this wm8904 work.

I will be happy to stack more patches about this topic during the 3.16
development phase.


Otherwise, the 5 patches by Voice go into at91-3.16-dt branch.

Thanks, bye.


>  .../devicetree/bindings/sound/atmel-wm8904.txt     |  2 ++
>  arch/arm/boot/dts/sama5d3.dtsi                     |  6 ++++++
>  arch/arm/boot/dts/sama5d3xmb.dtsi                  | 11 +++++++++-
>  sound/soc/atmel/atmel_wm8904.c                     | 25 +++++++++++-----------
>  4 files changed, 31 insertions(+), 13 deletions(-)
> 


-- 
Nicolas Ferre
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html