Re: [PATCH 3/6] ARM: berlin: add the AHCI node for the BG2Q

[Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>]

On 04/22/2014 06:28 PM, Thomas Petazzoni wrote:
> Dear Antoine Ténart,
> 
> On Tue, 22 Apr 2014 17:38:22 +0200, Antoine Ténart wrote:
>> The BG2Q has an AHCI SATA controller. Add the corresponding node
>> in its device tree.
> 
> I believe the commit log should explain why an apparently unrelated
> generic-regs@ node gets added in this commit.

generic-regs@ is from another patch, please drop it entirely.

Sebastian

>> diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
>> index 07452a7483fa..8e58aae73365 100644
>> --- a/arch/arm/boot/dts/berlin2q.dtsi
>> +++ b/arch/arm/boot/dts/berlin2q.dtsi
>> @@ -183,6 +183,18 @@
>>  			};
>>  		};
>>  
>> +		ahci: sata@e90000 {
>> +			compatible = "marvell,berlin-ahci";
>> +			reg = <0xe90000 0x10000>;
>> +			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
>> +			status = "disable";
>> +		};
>> +
>> +		generic-regs@ea0110 {
>> +			compatible = "marvell,berlin-generic-regs", "syscon";
>> +			reg = <0xea0110 0x10>;
>> +		};
>> +
>>  		apb@fc0000 {
>>  			compatible = "simple-bus";
>>  			#address-cells = <1>;
> 
> 
>