devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dave Gerlach <d-gerlach@ti.com>
To: Tony Lindgren <tony@atomide.com>
Cc: linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org,
	devicetree@vger.kernel.org, Rajendra Nayak <rnayak@ti.com>,
	Nishanth Menon <nm@ti.com>,
	bcousson@baylibre.com, Sekhar Nori <nsekhar@ti.com>,
	Lokesh Vutla <lokeshvutla@ti.com>
Subject: Re: [PATCH] ARM: dts: am437x-gp-evm: Boot fixes
Date: Wed, 23 Apr 2014 12:25:30 -0500	[thread overview]
Message-ID: <5357F78A.5000406@ti.com> (raw)
In-Reply-To: <20140423145904.GB4833@atomide.com>

On 04/23/2014 09:59 AM, Tony Lindgren wrote:
> * Dave Gerlach <d-gerlach@ti.com> [140422 12:53]:
>> On 04/22/2014 02:01 PM, Tony Lindgren wrote:
>>> * Dave Gerlach <d-gerlach@ti.com> [140422 11:52]:
>>>> This patch, along with patch here [1], fixes boot for am437x-gp-evm. The
>>>> bootloader configures gpio5_7 to control the DDR3 termination regulator,
>>>> the linked patch prevents that gpio bank from being reset and losing
>>>> the previously configured state, and this patch binds the gpio to a
>>>> regulator so the kernel is aware of the state of the gpio.
>>>>
>>>> [1] https://www.mail-archive.com/linux-omap@vger.kernel.org/msg102941.html
>>>
>>> Setting up the GPIO regulator makes sense to me. But the hack in the
>>> link above is potentially a nasty time bomb for anybody trying to
>>> use GPIO bank 5 on that board.
>>>
>>> What tests have been done that the GPIO bank behaves properly when
>>> it's not reset?
>>
>> We've been using this configuration on this board for a while without any
>> apparent issues. Also, am335x-evmsk already uses the same idea for the VTT
>> regulator on board from commit 6046adb6ad701026c10adeac8d6a4138895f12e5
>> [ARM: dts: am335x-evmsk: Do not reset gpio0] and I am unaware of any issues
>> with that either.
>
> OK. Do you have other GPIOs in use as interrupts for devices in these
> banks and do they work fine?

I dont see any interrupts in use from gpio5 bank but as a quick test if 
I add ti,no-reset-on-init to gpio3 and gpio4 I see no issue with 
matrix-keypad operation which uses gpios from each of those banks.

>
> Also, can you please test to make sure this works with the most recent
> Javier's GPIO patches that had the issue of not booting on am335x-evmsk?
>

Yes, when using Javier's patches in addition to this patch [1], which 
was found to be necessary through this discussion [2], the AM437x GP EVM 
boots fine with linux-next with my regulator patch and gpio5 no reset 
patch applied.

Regards,
Dave

[1] https://patchwork.kernel.org/patch/4041881/
[2] http://marc.info/?t=139817273800014&r=1&w=2

> Regards,
>
> Tony
>


  reply	other threads:[~2014-04-23 17:25 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-22 18:52 [PATCH] ARM: dts: am437x-gp-evm: Boot fixes Dave Gerlach
2014-04-22 18:52 ` [PATCH] ARM: dts: am437x-gp-evm: Add vtt_fixed regulator Dave Gerlach
2014-04-22 18:58   ` Nishanth Menon
2014-04-22 19:53     ` Dave Gerlach
2014-04-22 19:01 ` [PATCH] ARM: dts: am437x-gp-evm: Boot fixes Tony Lindgren
2014-04-22 19:53   ` Dave Gerlach
2014-04-23 14:59     ` Tony Lindgren
2014-04-23 17:25       ` Dave Gerlach [this message]
2014-04-25 16:41         ` Tony Lindgren
2014-04-29 14:47           ` Dave Gerlach

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5357F78A.5000406@ti.com \
    --to=d-gerlach@ti.com \
    --cc=bcousson@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=lokeshvutla@ti.com \
    --cc=nm@ti.com \
    --cc=nsekhar@ti.com \
    --cc=rnayak@ti.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).