devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Peter Ujfalusi <peter.ujfalusi-l0cyMroinI0@public.gmane.org>
To: lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org
Cc: sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH] mfd: twl6040: Optional clk32k clock handling
Date: Thu, 24 Apr 2014 12:15:33 +0300	[thread overview]
Message-ID: <5358D635.7010809@ti.com> (raw)
In-Reply-To: <1396522482-32036-1-git-send-email-peter.ujfalusi-l0cyMroinI0@public.gmane.org>

Lee,

On 04/03/2014 01:54 PM, Peter Ujfalusi wrote:
> In certain boards the source for the clk32k clock can be gated. In these
> boards the clk32k clock can be provided to the driver and it is going to be
> enabled/disabled when it is needed.
> If the clk32k clock is not provided the driver will assume that it is always
> running.

Do you want me to resend this patch, it seams to be missing from next still.

Thanks,
Péter

> 
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi-l0cyMroinI0@public.gmane.org>
> ---
>  Documentation/devicetree/bindings/mfd/twl6040.txt |  2 ++
>  drivers/mfd/twl6040.c                             | 10 ++++++++++
>  include/linux/mfd/twl6040.h                       |  2 ++
>  3 files changed, 14 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/twl6040.txt b/Documentation/devicetree/bindings/mfd/twl6040.txt
> index 0f5dd709d752..a41157b5d930 100644
> --- a/Documentation/devicetree/bindings/mfd/twl6040.txt
> +++ b/Documentation/devicetree/bindings/mfd/twl6040.txt
> @@ -19,6 +19,8 @@ Required properties:
>  
>  Optional properties, nodes:
>  - enable-active-high: To power on the twl6040 during boot.
> +- clocks: phandle to the clk32k clock provider
> +- clock-names: Must be "clk32k"
>  
>  Vibra functionality
>  Required properties:
> diff --git a/drivers/mfd/twl6040.c b/drivers/mfd/twl6040.c
> index 2e6504a8e1e3..12b314ea48dc 100644
> --- a/drivers/mfd/twl6040.c
> +++ b/drivers/mfd/twl6040.c
> @@ -291,6 +291,8 @@ int twl6040_power(struct twl6040 *twl6040, int on)
>  		if (twl6040->power_count++)
>  			goto out;
>  
> +		clk_prepare_enable(twl6040->clk32k);
> +
>  		/* Allow writes to the chip */
>  		regcache_cache_only(twl6040->regmap, false);
>  
> @@ -346,6 +348,8 @@ int twl6040_power(struct twl6040 *twl6040, int on)
>  
>  		twl6040->sysclk = 0;
>  		twl6040->mclk = 0;
> +
> +		clk_disable_unprepare(twl6040->clk32k);
>  	}
>  
>  out:
> @@ -644,6 +648,12 @@ static int twl6040_probe(struct i2c_client *client,
>  
>  	i2c_set_clientdata(client, twl6040);
>  
> +	twl6040->clk32k = devm_clk_get(&client->dev, "clk32k");
> +	if (IS_ERR(twl6040->clk32k)) {
> +		dev_info(&client->dev, "clk32k is not handled\n");
> +		twl6040->clk32k = NULL;
> +	}
> +
>  	twl6040->supplies[0].supply = "vio";
>  	twl6040->supplies[1].supply = "v2v1";
>  	ret = devm_regulator_bulk_get(&client->dev, TWL6040_NUM_SUPPLIES,
> diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h
> index a69d16b30c18..8f9fc3d26e6d 100644
> --- a/include/linux/mfd/twl6040.h
> +++ b/include/linux/mfd/twl6040.h
> @@ -28,6 +28,7 @@
>  #include <linux/interrupt.h>
>  #include <linux/mfd/core.h>
>  #include <linux/regulator/consumer.h>
> +#include <linux/clk.h>
>  
>  #define TWL6040_REG_ASICID		0x01
>  #define TWL6040_REG_ASICREV		0x02
> @@ -223,6 +224,7 @@ struct twl6040 {
>  	struct regmap *regmap;
>  	struct regmap_irq_chip_data *irq_data;
>  	struct regulator_bulk_data supplies[2]; /* supplies for vio, v2v1 */
> +	struct clk *clk32k;
>  	struct mutex mutex;
>  	struct mutex irq_mutex;
>  	struct mfd_cell cells[TWL6040_CELLS];
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2014-04-24  9:15 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-03 10:54 [PATCH] mfd: twl6040: Optional clk32k clock handling Peter Ujfalusi
     [not found] ` <1396522482-32036-1-git-send-email-peter.ujfalusi-l0cyMroinI0@public.gmane.org>
2014-04-03 10:54   ` Peter Ujfalusi
2014-04-24  9:15   ` Peter Ujfalusi [this message]
2014-04-28 10:36 ` Lee Jones
2014-04-28 10:46   ` Peter Ujfalusi
2014-04-28 12:50     ` Lee Jones
2014-04-28 12:51 ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5358D635.7010809@ti.com \
    --to=peter.ujfalusi-l0cymroini0@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).