From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sricharan R Subject: Re: [PATCH V5 0/3] arm: dts: dra7: Updates for adding crossbar device Date: Wed, 7 May 2014 10:10:27 +0530 Message-ID: <5369B93B.5060203@ti.com> References: <1399384579-25620-1-git-send-email-r.sricharan@ti.com> <20140506214526.GF2626@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20140506214526.GF2626@ti.com> Sender: linux-doc-owner@vger.kernel.org To: Darren Etheridge Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-doc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org, linus.walleij@linaro.org, linux@arm.linux.org.uk, tony@atomide.com, rnayak@ti.com, marc.zyngier@arm.com, grant.likely@linaro.org, mark.rutland@arm.com, tglx@linutronix.de, galak@codeaurora.org, santosh.shilimkar@ti.com, nm@ti.com, bcousson@baylibre.com, robherring2@gmail.com List-Id: devicetree@vger.kernel.org On Wednesday 07 May 2014 03:15 AM, Darren Etheridge wrote: > Sricharan R wrote on Tue [2014-May-06 19:26:16 +0530]: >> Some socs have a large number of interrupts requests to service >> the needs of its many peripherals and subsystems. All of the interrupt >> requests lines from the subsystems are not needed at the same >> time, so they have to be muxed to the controllers appropriately. >> In such places a interrupt controllers are preceded by an >> IRQ CROSSBAR that provides flexibility in muxing the device interrupt >> requests to the controller inputs. >> >> The dts file update to support the crossbar device and convert >> peripheral irq numbers to crossbar number are added here. >> >> This is a rebase of V4 series on top of 3.15-rc4 >> >> This series depends on crossbar-driver-fixes sent below >> http://marc.info/?l=linux-omap&m=139929963420299&w=2 >> >> Sricharan R (3): >> arm: dts: dra7: Add crossbar device binding >> arm: dts: dra7: Replace peripheral interrupt numbers with crossbar >> inputs >> arm: dts: dra7: Add routable-irqs property for gic node >> > > OK, assuming the bisectability issues discussed earlier on this thread > are addressed. I have tested the earlier crossbar patch series in > conjunction with this dts series with VIP capture and DSS display > running together on DRA7. Looks good with this combination of > devices. VIP is one of the modules that must have a crossbar mapping as > there is no default interrupt mapping for it, therefore VIP makes a good > test case. > > So please feel free to add: > > Tested-by: Darren Etheridge Thanks for the testing. Will reorder and repost. Regards, Sricharan