From mboxrd@z Thu Jan 1 00:00:00 1970 From: Angelo Subject: Re: usb/eth DTS nodes for custom board based on mpc5200 Date: Fri, 5 Dec 2008 15:02:38 +0000 (GMT) Message-ID: <537065.14124.qm@web23104.mail.ird.yahoo.com> References: Reply-To: s104259-whZMOeQn8C0@public.gmane.org Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="===============1840042160==" Return-path: In-Reply-To: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Mime-version: 1.0 Sender: devicetree-discuss-bounces+gldd-devicetree-discuss=m.gmane.org-mnsaURCQ41sdnm+yROfE0A@public.gmane.org Errors-To: devicetree-discuss-bounces+gldd-devicetree-discuss=m.gmane.org-mnsaURCQ41sdnm+yROfE0A@public.gmane.org To: Grant Likely Cc: devicetree-discuss-mnsaURCQ41sdnm+yROfE0A@public.gmane.org List-Id: devicetree@vger.kernel.org --===============1840042160== Content-Type: multipart/alternative; boundary="0-1865881593-1228489358=:14124" --0-1865881593-1228489358=:14124 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable Ok. Tha main problem is that if I cross-compile kernel for ARCH=3Dppc everythin= gs work fine.=20 >"Configuring the Ethernet pins for USB IO is just a pin routing board setu= p task." What should I do for this?!?!? * I've configured the port_config in=C2=A0 lite5200_setup_cpu(void) functio= n [arch/powerpc/platforms/52xx/lite5200.c]. I put in port_config the same v= alue that I put with ARCH=3Dppc! However I'm sure that my u-boot sets-up the port_config register because fa= tls usb 0:1 / show me the content of usb-storage. Thanks, @ngel --- Ven 5/12/08, Grant Likely ha scritto: Da: Grant Likely Oggetto: Re: usb/eth DTS nodes for custom board based on mpc5200 A: s104259-whZMOeQn8C0@public.gmane.org Cc: devicetree-discuss-mnsaURCQ41sdnm+yROfE0A@public.gmane.org, "linuxppc-dev" Data: Venerd=C3=AC 5 dicembre 2008, 15:40 On Fri, Dec 5, 2008 at 4:22 AM, Angelo wrote: > Hi all. > > I'd like to know if it's necessary to modify my DTS. > > On my board I have: > * u-boot 1.2.0 > * kernel 2.6.21 > * arch=3Dpowerpc > * dts based on lite5200b.dts > * USB port (USB2) configured on the Ethernet port > > Is it necessary to combine Ethernet and usb nodes into the device tree > source? No. Configuring the Ethernet pins for USB IO is just a pin routing board setup task. You do need to make sure U-Boot sets up the port_config register correctly, but it doesn't impact the device tree. You don't need to change any of the values in the USB node. However, if the Ethernet device is unused then you should remove the Ethernet node from your device tree. g. --=20 Grant Likely, B.Sc., P.Eng. Secret Lab Technologies Ltd. =0A=0A=0A --0-1865881593-1228489358=:14124 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable
Ok.

Tha main problem is that if I cros= s-compile kernel for ARCH=3Dppc everythings work fine.

>"Configu= ring the Ethernet pins for USB IO is just a pin routing board setup task."<= br>
What should I do for this?!?!?

* I've configured the port_con= fig in  lite5200_setup_cpu(void) function [arch/powerpc/platforms/52xx/lite5200.c]. I put in port_conf= ig the same value that I put with ARCH=3Dppc!

However I'm sure that = my u-boot sets-up the port_config register because fatls usb 0:1 / show me the content of usb-storage.
Thanks,
@ngel
--- Ven 5/12/08, Grant Likely <grant.likely@= secretlab.ca> ha scritto:
Da: Grant = Likely <grant.likely-s3s/WqlpOiPyB63q8FvJNQ@public.gmane.org>
Oggetto: Re: usb/eth DTS nodes for cu= stom board based on mpc5200
A: s104259-whZMOeQn8C0@public.gmane.org
Cc: devicetree-discus= s@ozlabs.org, "linuxppc-dev" <linuxppc-dev-mnsaURCQ41sdnm+yROfE0A@public.gmane.org>
Data: Vener= d=C3=AC 5 dicembre 2008, 15:40

On Fri, Dec 5, 2008 at 4:22 AM, =
Angelo <s104259-whZMOeQn8C0@public.gmane.org> wrote:
> Hi all.
>
> I'd =
like to know if it's necessary to modify my DTS.
>
> On my boar=
d I have:
> * u-boot 1.2.0
> * kernel 2.6.21
> * arch=3Dp=
owerpc
> * dts based on lite5200b.dts
> * USB port (USB2) confi=
gured on the Ethernet port
>
> Is it necessary to combine Ether=
net and usb nodes into the device tree
> source?

No.  Configur=
ing the Ethernet pins for USB IO is just a pin routing
board setup task.=
  You do need to make sure U-Boot sets up the
port_config register corre=
ctly, but it doesn't impact the device tree.
 You don't need to change
 any of the values in the USB node.

However, if the Ethernet device =
is unused then you should remove the
Ethernet node from your device tree=
.

g.

-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technol=
ogies Ltd.

=0A=0A=0A=0A --0-1865881593-1228489358=:14124-- --===============1840042160== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ devicetree-discuss mailing list devicetree-discuss-mnsaURCQ41sdnm+yROfE0A@public.gmane.org https://ozlabs.org/mailman/listinfo/devicetree-discuss --===============1840042160==--