Re: [PATCH v3 7/7] dts: dra7-evm: add USB support

[Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>]

On 05/13/2014 08:18 PM, Tony Lindgren wrote:
> * Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org> [140505 02:55]:
>> Add USB pinmux information and USB modes
>> for the USB controllers.
>>
>> CC: Benoît Cousson <bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
>> Reviewed-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>
>> Signed-off-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
>> ---
>>  arch/arm/boot/dts/dra7-evm.dts | 24 ++++++++++++++++++++++++
>>  1 file changed, 24 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
>> index 5babba0..1d77815 100644
>> --- a/arch/arm/boot/dts/dra7-evm.dts
>> +++ b/arch/arm/boot/dts/dra7-evm.dts
>> @@ -93,6 +93,18 @@
>>  			0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
>>  		>;
>>  	};
>> +
>> +	usb1_pins: pinmux_usb1_pins {
>> +                pinctrl-single,pins = <
>> +			0x280	0xc0000	/* usb1_drvvbus, SLOW_SLEW | PULLUPEN | MODE0 */
>> +                >;
>> +        };
>> +
>> +	usb2_pins: pinmux_usb2_pins {
>> +                pinctrl-single,pins = <
>> +			0x284	0xc0000 /* usb2_drvvbus, SLOW_SLEW | PULLUPEN | MODE0 */
>> +                >;
>> +        };
>>  };
> 
> Looks like these should use the existing defins PIN_INPUT_SLEW etc?

Yes, I'll fix them up.

cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html