* [PATCH v3 0/2] ARM: dts: add device data for exynos4412-trats2
@ 2014-05-20 10:48 Beomho Seo
2014-05-20 22:45 ` Tomasz Figa
0 siblings, 1 reply; 3+ messages in thread
From: Beomho Seo @ 2014-05-20 10:48 UTC (permalink / raw)
To: linux-samsung-soc, devicetree, Tomasz Figa, Kukjin Kim
Cc: Myungjoo Ham, Chanwoo Choi, Jaehoon Chung
This patchset add some device node for exynos4412-trats2.
It is based on v3.15-next/dt-samsung-2 branch.
exynos4412-trats2.dts
- Fix incorrect compatible. Compatible of AK8975 are "ak8975" or "asahi-kasei,ak8975".
- Add cm36651 light/proximity sensor device node.
- Change gpio-key device node. fix incorrect gpio property, and then add "ok-key" node.
Changes in v3:
- Patch set based on v3.16-next/dt-samsung
- ARM: dts: fix incorrect compatible for exynos4412 patch is applied.
- Remove device node property; status, interrupt-parent, interrupt
- Changes gpio/interrupt specified index.
Changes in v2:
- Change ak8975 magnetic sensor compatible according to binding document.
- Change cm36651 light/proximity sensor compatible according to binding document and driver.
Beomho Seo (2):
ARM: dts: add cm36651 light/proximity sensor node
ARM: dts: fixed gpio key node for exynos4412
arch/arm/boot/dts/exynos4412-trats2.dts | 46 +++++++++++++++++++++++++------
1 file changed, 38 insertions(+), 8 deletions(-)
--
1.7.9.5
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v3 0/2] ARM: dts: add device data for exynos4412-trats2
2014-05-20 10:48 [PATCH v3 0/2] ARM: dts: add device data for exynos4412-trats2 Beomho Seo
@ 2014-05-20 22:45 ` Tomasz Figa
2014-05-21 13:49 ` Kukjin Kim
0 siblings, 1 reply; 3+ messages in thread
From: Tomasz Figa @ 2014-05-20 22:45 UTC (permalink / raw)
To: Beomho Seo, linux-samsung-soc, devicetree, Tomasz Figa,
Kukjin Kim
Cc: Myungjoo Ham, Chanwoo Choi, Jaehoon Chung
On 20.05.2014 12:48, Beomho Seo wrote:
> This patchset add some device node for exynos4412-trats2.
> It is based on v3.15-next/dt-samsung-2 branch.
>
> exynos4412-trats2.dts
> - Fix incorrect compatible. Compatible of AK8975 are "ak8975" or "asahi-kasei,ak8975".
> - Add cm36651 light/proximity sensor device node.
> - Change gpio-key device node. fix incorrect gpio property, and then add "ok-key" node.
>
> Changes in v3:
> - Patch set based on v3.16-next/dt-samsung
> - ARM: dts: fix incorrect compatible for exynos4412 patch is applied.
> - Remove device node property; status, interrupt-parent, interrupt
> - Changes gpio/interrupt specified index.
>
> Changes in v2:
>
> - Change ak8975 magnetic sensor compatible according to binding document.
> - Change cm36651 light/proximity sensor compatible according to binding document and driver.
>
> Beomho Seo (2):
> ARM: dts: add cm36651 light/proximity sensor node
> ARM: dts: fixed gpio key node for exynos4412
>
> arch/arm/boot/dts/exynos4412-trats2.dts | 46 +++++++++++++++++++++++++------
> 1 file changed, 38 insertions(+), 8 deletions(-)
>
For the whole series:
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Best regards,
Tomasz
^ permalink raw reply [flat|nested] 3+ messages in thread
* RE: [PATCH v3 0/2] ARM: dts: add device data for exynos4412-trats2
2014-05-20 22:45 ` Tomasz Figa
@ 2014-05-21 13:49 ` Kukjin Kim
0 siblings, 0 replies; 3+ messages in thread
From: Kukjin Kim @ 2014-05-21 13:49 UTC (permalink / raw)
To: 'Tomasz Figa', 'Beomho Seo', linux-samsung-soc,
devicetree, 'Tomasz Figa'
Cc: 'Myungjoo Ham', 'Chanwoo Choi',
'Jaehoon Chung'
Tomasz Figa wrote:
>
> On 20.05.2014 12:48, Beomho Seo wrote:
> > This patchset add some device node for exynos4412-trats2.
> > It is based on v3.15-next/dt-samsung-2 branch.
> >
> > exynos4412-trats2.dts
> > - Fix incorrect compatible. Compatible of AK8975 are "ak8975" or "asahi-
> kasei,ak8975".
> > - Add cm36651 light/proximity sensor device node.
> > - Change gpio-key device node. fix incorrect gpio property, and then add
> "ok-key" node.
> >
> > Changes in v3:
> > - Patch set based on v3.16-next/dt-samsung
> > - ARM: dts: fix incorrect compatible for exynos4412 patch is applied.
> > - Remove device node property; status, interrupt-parent, interrupt
> > - Changes gpio/interrupt specified index.
> >
> > Changes in v2:
> >
> > - Change ak8975 magnetic sensor compatible according to binding
document.
> > - Change cm36651 light/proximity sensor compatible according to binding
> document and driver.
> >
> > Beomho Seo (2):
> > ARM: dts: add cm36651 light/proximity sensor node
> > ARM: dts: fixed gpio key node for exynos4412
> >
> > arch/arm/boot/dts/exynos4412-trats2.dts | 46
> +++++++++++++++++++++++++------
> > 1 file changed, 38 insertions(+), 8 deletions(-)
> >
>
> For the whole series:
>
> Reviewed-by: Tomasz Figa <t.figa@samsung.com>
>
Looks good to me too except useless 2 empty line like following?
+ };
+
};
Will apply with removing them :-)
Thanks,
Kukjin
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2014-05-21 13:49 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-05-20 10:48 [PATCH v3 0/2] ARM: dts: add device data for exynos4412-trats2 Beomho Seo
2014-05-20 22:45 ` Tomasz Figa
2014-05-21 13:49 ` Kukjin Kim
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).