From mboxrd@z Thu Jan 1 00:00:00 1970 From: Florian Vaussard Subject: Re: [PATCH] ARM: dts: duovero-parlor: Add HDMI output Date: Wed, 21 May 2014 08:41:10 +0200 Message-ID: <537C4A86.1010507@epfl.ch> References: <1400595946-1294-1-git-send-email-florian.vaussard@epfl.ch> <20140520143932.GA27830@atomide.com> Reply-To: florian.vaussard@epfl.ch Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20140520143932.GA27830@atomide.com> Sender: linux-omap-owner@vger.kernel.org To: Tony Lindgren Cc: Tomi Valkeinen , linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org List-Id: devicetree@vger.kernel.org On 05/20/2014 04:39 PM, Tony Lindgren wrote: > * Florian Vaussard [140520 07:26]: >> @@ -77,6 +94,15 @@ >> 0x30 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a24.gpio_48: amdix enabled */ >> >; >> }; >> + >> + dss_hdmi_pins: pinmux_dss_hdmi_pins { >> + pinctrl-single,pins = < >> + 0x58 (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_hpd.hdmi_hpd */ >> + 0x5a (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ >> + 0x5c (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */ >> + 0x5e (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */ >> + >; >> + }; >> }; >> >> &i2c2 { > > This seems to apply with fuzz against omap-for-v3.16/dt-v2, but > should be updated against omap-for-v3.16/dt-v2 to use OMAP4_IOPAD > as omap4-duovero-parlor.dts is now using it. That makes checking > the muxing easier against the TRM. See commit 5efa994b0d49 for > the script Joachim used. > It is based on Tomi's for-next, which is based on 3.15-rc4, so the fuzz is not surprising. I will update against omap-for-v3.16/dt-v2. Regards, Florian