devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jeffrey Hugo <quic_jhugo@quicinc.com>
To: Konrad Dybcio <konrad.dybcio@linaro.org>,
	Andy Gross <agross@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Taniya Das <tdas@codeaurora.org>
Cc: Marijn Suijten <marijn.suijten@somainline.org>,
	<linux-arm-msm@vger.kernel.org>, <linux-clk@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	AngeloGioacchino Del Regno 
	<angelogioacchino.delregno@collabora.com>,
	Jami Kettunen <jami.kettunen@somainline.org>
Subject: Re: [PATCH 3/9] clk: qcom: gcc-msm8998: Control MMSS and GPUSS GPLL0 outputs properly
Date: Mon, 26 Jun 2023 09:46:42 -0600	[thread overview]
Message-ID: <537ffe05-1759-bf37-3a0c-a29ccd2e9d6d@quicinc.com> (raw)
In-Reply-To: <f2ca0d67-25e7-1313-9cea-fddb1ad28c9b@quicinc.com>

On 6/22/2023 9:19 AM, Jeffrey Hugo wrote:
> On 6/22/2023 9:05 AM, Konrad Dybcio wrote:
>> On 22.06.2023 16:55, Jeffrey Hugo wrote:
>>> On 6/22/2023 5:57 AM, Konrad Dybcio wrote:
>>>> Up until now, we've been relying on some non-descript hardware magic
>>>> to pinkypromise turn the clocks on for us. While new SoCs shine with
>>>> that feature, MSM8998 can not always be fully trusted.
>>>>
>>>> Register the MMSS and GPUSS GPLL0 legs with the CCF to allow for manual
>>>> enable voting.
>>>>
>>>> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
>>>> ---
>>>>    drivers/clk/qcom/gcc-msm8998.c | 58 
>>>> ++++++++++++++++++++++++++++++++++++++++++
>>>>    1 file changed, 58 insertions(+)
>>>>
>>>> diff --git a/drivers/clk/qcom/gcc-msm8998.c 
>>>> b/drivers/clk/qcom/gcc-msm8998.c
>>>> index be024f8093c5..cccb19cae481 100644
>>>> --- a/drivers/clk/qcom/gcc-msm8998.c
>>>> +++ b/drivers/clk/qcom/gcc-msm8998.c
>>>> @@ -25,6 +25,9 @@
>>>>    #include "reset.h"
>>>>    #include "gdsc.h"
>>>>    +#define GCC_MMSS_MISC    0x0902C
>>>> +#define GCC_GPU_MISC    0x71028
>>>> +
>>>>    static struct pll_vco fabia_vco[] = {
>>>>        { 250000000, 2000000000, 0 },
>>>>        { 125000000, 1000000000, 1 },
>>>> @@ -1367,6 +1370,22 @@ static struct clk_branch gcc_boot_rom_ahb_clk 
>>>> = {
>>>>        },
>>>>    };
>>>>    +static struct clk_branch gcc_mmss_gpll0_div_clk = {
>>>> +    .halt_check = BRANCH_HALT_DELAY,
>>>> +    .clkr = {
>>>> +        .enable_reg = 0x5200c,
>>>> +        .enable_mask = BIT(0),
>>>> +        .hw.init = &(struct clk_init_data){
>>>> +            .name = "gcc_mmss_gpll0_div_clk",
>>>> +            .parent_hws = (const struct clk_hw *[]) {
>>>> +                &gpll0_out_main.clkr.hw,
>>>> +            },
>>>> +            .num_parents = 1,
>>>> +            .ops = &clk_branch2_ops,
>>>> +        },
>>>> +    },
>>>> +};
>>>> +
>>>>    static struct clk_branch gcc_mmss_gpll0_clk = {
>>>>        .halt_check = BRANCH_HALT_DELAY,
>>>>        .clkr = {
>>>> @@ -1395,6 +1414,38 @@ static struct clk_branch 
>>>> gcc_mss_gpll0_div_clk_src = {
>>>>        },
>>>>    };
>>>>    +static struct clk_branch gcc_gpu_gpll0_div_clk = {
>>>> +    .halt_check = BRANCH_HALT_DELAY,
>>>> +    .clkr = {
>>>> +        .enable_reg = 0x5200c,
>>>> +        .enable_mask = BIT(3),
>>>> +        .hw.init = &(struct clk_init_data){
>>>> +            .name = "gcc_gpu_gpll0_div_clk",
>>>> +            .parent_hws = (const struct clk_hw *[]) {
>>>> +                &gpll0_out_main.clkr.hw,
>>>> +            },
>>>> +            .num_parents = 1,
>>>> +            .ops = &clk_branch2_ops,
>>>> +        },
>>>> +    },
>>>> +};
>>>> +
>>>> +static struct clk_branch gcc_gpu_gpll0_clk = {
>>>> +    .halt_check = BRANCH_HALT_DELAY,
>>>> +    .clkr = {
>>>> +        .enable_reg = 0x5200c,
>>>> +        .enable_mask = BIT(4),
>>>> +        .hw.init = &(struct clk_init_data){
>>>> +            .name = "gcc_gpu_gpll0_clk",
>>>> +            .parent_hws = (const struct clk_hw *[]) {
>>>> +                &gpll0_out_main.clkr.hw,
>>>> +            },
>>>> +            .num_parents = 1,
>>>> +            .ops = &clk_branch2_ops,
>>>> +        },
>>>> +    },
>>>> +};
>>>> +
>>>>    static struct clk_branch gcc_blsp1_ahb_clk = {
>>>>        .halt_reg = 0x17004,
>>>>        .halt_check = BRANCH_HALT_VOTED,
>>>> @@ -3080,6 +3131,9 @@ static struct clk_regmap *gcc_msm8998_clocks[] 
>>>> = {
>>>>        [AGGRE2_SNOC_NORTH_AXI] = &aggre2_snoc_north_axi_clk.clkr,
>>>>        [SSC_XO] = &ssc_xo_clk.clkr,
>>>>        [SSC_CNOC_AHBS_CLK] = &ssc_cnoc_ahbs_clk.clkr,
>>>> +    [GCC_MMSS_GPLL0_DIV_CLK] = &gcc_mmss_gpll0_div_clk.clkr,
>>>> +    [GCC_GPU_GPLL0_DIV_CLK] = &gcc_gpu_gpll0_div_clk.clkr,
>>>> +    [GCC_GPU_GPLL0_CLK] = &gcc_gpu_gpll0_clk.clkr,
>>>>    };
>>>>      static struct gdsc *gcc_msm8998_gdscs[] = {
>>>> @@ -3235,6 +3289,10 @@ static int gcc_msm8998_probe(struct 
>>>> platform_device *pdev)
>>>>        if (ret)
>>>>            return ret;
>>>>    +    /* Disable the GPLL0 active input to MMSS and GPU via MISC 
>>>> registers */
>>>> +    regmap_write(regmap, GCC_MMSS_MISC, 0x10003);
>>>> +    regmap_write(regmap, GCC_GPU_MISC, 0x10003);
>>>
>>> I wonder, does this disrupt a handoff of an active display from the 
>>> bootloader to Linux?
>> My phone's bootloader doesn't initialize the display, if you (or Angelo
>> or Jami, +CC) could test this, it'd be wonderful.
> 
> Let me carve out some time to try it on the laptop.

Tested on the Lenovo Miix 630, and observed no issues.

Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>

For patches 3-6 inclusive
Tested-by: Jeffrey Hugo <quic_jhugo@quicinc.com>

  reply	other threads:[~2023-06-26 15:47 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-22 11:57 [PATCH 0/9] MSM8998 clk cleanups and fixups Konrad Dybcio
2023-06-22 11:57 ` [PATCH 1/9] dt-bindings: clk: qcom,gcc-msm8998: Add missing GPU/MMSS GPLL0 legs Konrad Dybcio
2023-06-22 14:41   ` Jeffrey Hugo
2023-06-23 16:40   ` Krzysztof Kozlowski
2023-06-22 11:57 ` [PATCH 2/9] dt-bindings: clock: qcom,mmcc: Add GPLL0_DIV for MSM8998 Konrad Dybcio
2023-06-22 14:47   ` Jeffrey Hugo
2023-06-22 14:54   ` Rob Herring
2023-06-23 16:40   ` Krzysztof Kozlowski
2023-06-22 11:57 ` [PATCH 3/9] clk: qcom: gcc-msm8998: Control MMSS and GPUSS GPLL0 outputs properly Konrad Dybcio
2023-06-22 14:55   ` Jeffrey Hugo
2023-06-22 15:05     ` Konrad Dybcio
2023-06-22 15:19       ` Jeffrey Hugo
2023-06-26 15:46         ` Jeffrey Hugo [this message]
2023-06-22 11:57 ` [PATCH 4/9] clk: qcom: mmcc-msm8998: Properly consume GPLL0 inputs Konrad Dybcio
2023-06-22 15:03   ` Jeffrey Hugo
2023-06-22 11:57 ` [PATCH 5/9] clk: qcom: gpucc-msm8998: Use the correct GPLL0 leg with old DTs Konrad Dybcio
2023-06-22 15:03   ` Jeffrey Hugo
2023-06-22 11:57 ` [PATCH 6/9] clk: qcom: gcc-msm8998: Don't check halt bit on some branch clks Konrad Dybcio
2023-06-22 11:59   ` Konrad Dybcio
2023-06-22 15:04   ` Jeffrey Hugo
2023-06-22 11:57 ` [PATCH 7/9] clk: qcom: gcc-msm8998: Don't poke at some BIMC GPU clocks Konrad Dybcio
2023-06-23 14:25   ` Jeffrey Hugo
2023-06-22 11:57 ` [PATCH 8/9] arm64: dts: qcom: msm8998: Use the correct GPLL0 leg for GPUCC Konrad Dybcio
2023-06-23 14:26   ` Jeffrey Hugo
2023-06-22 11:57 ` [PATCH 9/9] arm64: dts: qcom: msm8998: Use the correct GPLL0_DIV leg for MMCC Konrad Dybcio
2023-06-23 14:27   ` Jeffrey Hugo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=537ffe05-1759-bf37-3a0c-a29ccd2e9d6d@quicinc.com \
    --to=quic_jhugo@quicinc.com \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jami.kettunen@somainline.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marijn.suijten@somainline.org \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=tdas@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).