devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jaehoon Chung <jh80.chung@samsung.com>
To: Seungwon Jeon <tgih.jun@samsung.com>,
	'Jaehoon Chung' <jh80.chung@samsung.com>,
	linux-mmc@vger.kernel.org
Cc: chris@printf.net, ulf.hansson@linaro.org,
	ludovic.desroches@atmel.com, devicetree@vger.kernel.org,
	linux-samsung-soc@vger.kernel.org, cpgs@samsung.com
Subject: Re: [PATCHv2 2/3] mmc: dw_mmc: use the __mmc_of_parse to parse the slot node
Date: Tue, 27 May 2014 19:07:37 +0900	[thread overview]
Message-ID: <538463E9.30804@samsung.com> (raw)
In-Reply-To: <002e01cf7990$ea98aec0$bfca0c40$%jun@samsung.com>

Hi, Seungwon

On 05/27/2014 06:49 PM, Seungwon Jeon wrote:
> Hi Jaehoon,
> 
> On Mon, May 26, 2014, Jaehoon Chung wrote:
>> dw-mmc controller have the multiple slot.
> Have -> has?
Fix it.

> 
>> Then it needs to parse the property for each slot.
>>
>> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
>> ---
>> Changelog V2:
>> 	- None
>>
>>  drivers/mmc/host/dw_mmc.c |   25 ++++++-------------------
>>  1 file changed, 6 insertions(+), 19 deletions(-)
>>
>> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
>> index 1ac227c..d4800f8 100644
>> --- a/drivers/mmc/host/dw_mmc.c
>> +++ b/drivers/mmc/host/dw_mmc.c
>> @@ -1015,12 +1015,11 @@ static int dw_mci_get_cd(struct mmc_host *mmc)
>>  {
>>  	int present;
>>  	struct dw_mci_slot *slot = mmc_priv(mmc);
>> -	struct dw_mci_board *brd = slot->host->pdata;
>>  	struct dw_mci *host = slot->host;
>>  	int gpio_cd = mmc_gpio_get_cd(mmc);
>>
>>  	/* Use platform get_cd function, else try onboard card detect */
>> -	if (brd->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION)
>> +	if (slot->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION)
>>  		present = 1;
>>  	else if (!IS_ERR_VALUE(gpio_cd))
>>  		present = gpio_cd;
>> @@ -2010,6 +2009,9 @@ static struct dw_mci_of_slot_quirks {
>>  	{
>>  		.quirk	= "disable-wp",
>>  		.id	= DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT,
>> +	}, {
>> +		.quirk	= "broken-cd",
>> +		.id	= DW_MCI_QUIRK_BROKEN_CARD_DETECTION,
>>  	},
>>  };
>>
>> @@ -2088,7 +2090,7 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id)
>>  	if (host->pdata->caps2)
>>  		mmc->caps2 = host->pdata->caps2;
>>
>> -	mmc_of_parse(mmc);
>> +	__mmc_of_parse(mmc, dw_mci_of_find_slot_node(host->dev, slot->id));
>>
>>  	if (host->pdata->blk_settings) {
>>  		mmc->max_segs = host->pdata->blk_settings->max_segs;
>> @@ -2231,23 +2233,13 @@ static inline bool dw_mci_ctrl_all_reset(struct dw_mci *host)
>>  }
>>
>>  #ifdef CONFIG_OF
>> -static struct dw_mci_of_quirks {
>> -	char *quirk;
>> -	int id;
>> -} of_quirks[] = {
>> -	{
>> -		.quirk	= "broken-cd",
>> -		.id	= DW_MCI_QUIRK_BROKEN_CARD_DETECTION,
>> -	},
>> -};
>> -
> Moving broken-cd to slot_quirks is reasonable.
> But I think of_quirks should be kept and we can add right quirks.
> In cae of DW_MCI_QUIRK_IDMAC_DTO and DW_MCI_QUIRK_RETRY_DELAY,
> we can handle those with dw_mci_of_quirks although we didn't add.
Ok. 

Best Regards,
Jaehoon Chung
> 
>>  static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
>>  {
>>  	struct dw_mci_board *pdata;
>>  	struct device *dev = host->dev;
>>  	struct device_node *np = dev->of_node;
>>  	const struct dw_mci_drv_data *drv_data = host->drv_data;
>> -	int idx, ret;
>> +	int ret;
>>  	u32 clock_frequency;
>>
>>  	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
>> @@ -2264,11 +2256,6 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
>>  		pdata->num_slots = 1;
>>  	}
>>
>> -	/* get quirks */
>> -	for (idx = 0; idx < ARRAY_SIZE(of_quirks); idx++)
>> -		if (of_get_property(np, of_quirks[idx].quirk, NULL))
>> -			pdata->quirks |= of_quirks[idx].id;
>> -
> Same as above.
> 
> Thanks,
> Seungwon Jeon
> 
>>  	if (of_property_read_u32(np, "fifo-depth", &pdata->fifo_depth))
>>  		dev_info(dev, "fifo-depth property not found, using "
>>  				"value of FIFOTH register as default\n");
>> --
>> 1.7.9.5
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 


  reply	other threads:[~2014-05-27 10:07 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-26 11:35 [PATCHv2 0/3] mmc: fixed the mmc_of_parse for dwmmc Jaehoon Chung
2014-05-26 11:35 ` [PATCHv2 1/3] mmc: host: add slot argument to mmc_of_parse Jaehoon Chung
2014-05-26 14:37   ` Ulf Hansson
2014-05-27  9:48   ` Seungwon Jeon
2014-05-26 11:35 ` [PATCHv2 2/3] mmc: dw_mmc: use the __mmc_of_parse to parse the slot node Jaehoon Chung
2014-05-27  9:49   ` Seungwon Jeon
2014-05-27 10:07     ` Jaehoon Chung [this message]
2014-05-26 11:35 ` [PATCHv2 3/3] ARM: dts: replace the broken-cd property into slot node for dwmmc Jaehoon Chung
2014-05-27  9:49   ` Seungwon Jeon
2014-05-27 10:08     ` Jaehoon Chung
2014-05-27 10:38     ` Ulf Hansson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=538463E9.30804@samsung.com \
    --to=jh80.chung@samsung.com \
    --cc=chris@printf.net \
    --cc=cpgs@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=ludovic.desroches@atmel.com \
    --cc=tgih.jun@samsung.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).