Re: [PATCH] ARM: dts: rockchip: add pinctrl nodes for SPDIF, LCDC, CIF, HDMI, USB and GPS

["Heiko Stübner" <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>]

Hi Julien,

Am Freitag, 7. November 2014, 16:19:49 schrieb Julien CHAUVEAU:
> On RK3066, add pinctrl nodes for SPDIF, LCDC1, CIF0/1, HDMI and USB.
> On RK3188, add pinctrl nodes for SPDIF, LCDC1, CIF and GPS.

Please don't bulk-add pinctrl settings nobody is using for the forseeable 
future. There are currently no spdif, lcdc, cif and hdmi drivers for those 
socs and things like the usb_vbus and sd_pwr pins are used as gpios through 
regulators.

Pinctrl settings can be added in the same patch adding the device node, 
_after_ a driver got accepted.


> At the same time, add some missing pinctrl for SDMMC0 and SDMMC1
> and fix the unit addresses of GPIO0 and GPIO1 banks in rk3188.dtsi.

I you're concatenating change descriptions by "and" or your "At the same 
time", it's a good indicator that these should be two separate patches.
The general rule is, one patch - one issue.


So I'd suggest resending the address fix for the two gpios and leaving the pin 
settings be till something really uses them,


Heiko

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html