From mboxrd@z Thu Jan 1 00:00:00 1970 From: Grygorii Strashko Subject: Re: [PATCH v1] of/irq: do irq resolution in platform_get_irq_byname() Date: Wed, 28 May 2014 13:07:34 +0300 Message-ID: <5385B566.2050600@ti.com> References: <1400582523-22684-1-git-send-email-grygorii.strashko@ti.com> <20140523080333.66720C4176E@trevor.secretlab.ca> <20140528071855.GJ4227@lee--X1> Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1"; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Grant Likely , Chen-Yu Tsai Cc: Linus Walleij , Lee Jones , Rob Herring , Russell King , "devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" , Tony Lindgren , Greg Kroah-Hartman , LKML , Rob Herring , Olof Johansson , Kevin Hilman , Thierry Reding , Santosh Shilimkar , linux-arm-kernel List-Id: devicetree@vger.kernel.org Hi All, On 05/28/2014 12:03 PM, Grant Likely wrote: > On Wed, May 28, 2014 at 9:49 AM, Chen-Yu Tsai wrote: >> On Wed, May 28, 2014 at 4:25 PM, Linus Walleij wrote: >>> On Wed, May 28, 2014 at 9:18 AM, Lee Jones wrote: >>>> On Tue, 27 May 2014, Rob Herring wrote: >>>> >>>>> On Tue, May 27, 2014 at 3:23 PM, Kevin Hilman wrote: >>>>>> On Fri, May 23, 2014 at 1:03 AM, Grant Likely wrote: >>>>>>> On Tue, 20 May 2014 13:42:02 +0300, Grygorii Strashko wrote: >>>>>>>> The commit 9ec36cafe43bf835f8f29273597a5b0cbc8267ef >>>>>>>> "of/irq: do irq resolution in platform_get_irq" from Rob Herring - >>>>>>>> moves resolving of the interrupt resources in platform_get_irq(). >>>>>>>> But this solution isn't complete because platform_get_irq_byname() >>>>>>>> need to be modified the same way. >>>>>>>> >>>>>>>> Hence, fix it by adding interrupt resolution code at the >>>>>>>> platform_get_irq_byname() function too. >>>>>>>> >>>>>>>> Cc: Russell King >>>>>>>> Cc: Rob Herring >>>>>>>> Cc: Tony Lindgren >>>>>>>> Cc: Grant Likely >>>>>>>> Cc: Thierry Reding >>>>>>>> >>>>>>>> Signed-off-by: Grygorii Strashko >>>>>>> >>>>>>> Applied, Thanks. >>>>>> >>>>>> As of next-20150526, the ST u8500 Snowball board has been failing boot >>>>>> in linux-next, and was bisected down to this patch (commit >>>>>> ad69674e73a1 in -next). Full boot failure attached. >>>>>> >>>>>> I have not dug any deeper, but can confirm that next-20140526 with >>>>>> this patch reverted boots again on the snowball board. >>>>> >>>>> There's a patch on the list which fixes it. The problem is stmmac >>>>> driver was expecting only one error code. >>>> >>>> Does Snowball even use stmmac? >>> >>> No. >>> >>> I don't get this... >> >> Log says musb is wrestling control over some pins with some other driver: >> >> [ 1.441497] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already >> requested by a03e0000.usb_per5; cannot claim for musb-hdrc.0.auto >> [ 1.453369] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.0.auto) >> status -22 >> [ 1.460571] pinctrl-nomadik soc:pinctrl: could not request pin 256 >> (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik >> [ 1.472076] musb-hdrc musb-hdrc.0.auto: Error applying setting, >> reverse things back >> [ 1.479827] HS USB OTG: no transceiver configured >> [ 1.484558] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed >> with status -517 >> [ 1.492309] platform musb-hdrc.0.auto: Driver musb-hdrc requests >> probe deferral >> [ 1.500183] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already >> requested by a03e0000.usb_per5; cannot claim for musb-hdrc.0.auto >> [ 1.512023] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.0.auto) >> status -22 >> [ 1.519226] pinctrl-nomadik soc:pinctrl: could not request pin 256 >> (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik >> [ 1.530731] musb-ux500 musb-hdrc.0.auto: Error applying setting, >> reverse things back >> [ 1.539184] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already >> requested by a03e0000.usb_per5; cannot claim for musb-hdrc.1.auto >> [ 1.551025] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.1.auto) >> status -22 >> [ 1.558258] pinctrl-nomadik soc:pinctrl: could not request pin 256 >> (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik >> [ 1.569732] musb-hdrc musb-hdrc.1.auto: Error applying setting, >> reverse things back >> [ 1.577453] HS USB OTG: no transceiver configured >> >> [ .. repeats until the end .. ] >> >> I think this is not related to this patch. > > The bisected patch causes platform_get_irq() to always parse the > devicetree to obtain the irq instead of using a precalculated value in > the platform_device. There are two possible scenarios for this problem > that I can think of: > 1) Platform_get_irq() is getting called multiple times (which would > happen on a deferred probe) but the setup code isn't handling it > properly, like trying to request the GPIO more than once > 2) the platform_device was preloaded with an irq number that differs > from what is determined when parsing the tree. This would happen if a > platform_device was created manually. > Could anyone try attached patch? It has to improve situation, but it might not fix all problems (see my previous e-mail). Regards, -grygorii -- From 4a41912dba648c935982274966426fa430fd5aa4 Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Wed, 28 May 2014 12:53:34 +0300 Subject: [PATCH] mfd: ab8500: fix dt irq mapping The AD8500 defines itself as interrupt-controller in DT, but it doesn't assign DT node to IRQ domain when creates it. As result, of_irq_xx() helpers don't work because they can't find necessary IRQ domain. Hence, fix it by assigning AD8500 core device DT node to IRQ domain when it's created. Signed-off-by: Grygorii Strashko --- drivers/mfd/ab8500-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index a8ee4a3..cf2e6a1 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -591,7 +591,7 @@ static int ab8500_irq_init(struct ab8500 *ab8500, struct device_node *np) num_irqs = AB8500_NR_IRQS; /* If ->irq_base is zero this will give a linear mapping */ - ab8500->domain = irq_domain_add_simple(NULL, + ab8500->domain = irq_domain_add_simple(ab8500->dev->of_node, num_irqs, 0, &ab8500_irq_ops, ab8500); -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html