devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Nishanth Menon <nm@ti.com>
To: Thomas Abraham <thomas.ab@samsung.com>,
	linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Cc: rjw@rjwysocki.net, linux-samsung-soc@vger.kernel.org,
	kgene.kim@samsung.com, t.figa@samsung.com,
	l.majewski@samsung.com, viresh.kumar@linaro.org
Subject: Re: [PATCH v5 1/2] cpufreq / OPP: Allow boost frequency to be looked up from device tree
Date: Thu, 29 May 2014 15:51:36 -0500	[thread overview]
Message-ID: <53879DD8.1060906@ti.com> (raw)
In-Reply-To: <1401374319-4480-2-git-send-email-thomas.ab@samsung.com>

On 05/29/2014 09:38 AM, Thomas Abraham wrote:
> From: Thomas Abraham <thomas.ab@samsung.com>
> 
> Commit 6f19efc0 ("cpufreq: Add boost frequency support in core") adds
> support for CPU boost mode. This patch adds support for finding available
> boost frequencies from device tree and marking them as usable in boost mode.
> 
> Cc: Nishanth Menon <nm@ti.com>
> Cc: Lukasz Majewski <l.majewski@samsung.com>
> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
> ---
>  drivers/cpufreq/cpufreq_opp.c |   45 +++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 45 insertions(+)
> 
> diff --git a/drivers/cpufreq/cpufreq_opp.c b/drivers/cpufreq/cpufreq_opp.c
> index c0c6f4a..05fb115 100644
> --- a/drivers/cpufreq/cpufreq_opp.c
> +++ b/drivers/cpufreq/cpufreq_opp.c
> @@ -19,6 +19,7 @@
>  #include <linux/pm_opp.h>
>  #include <linux/rcupdate.h>
>  #include <linux/slab.h>
> +#include <linux/of.h>
>  
>  /**
>   * dev_pm_opp_init_cpufreq_table() - create a cpufreq table for a device
> @@ -51,6 +52,11 @@ int dev_pm_opp_init_cpufreq_table(struct device *dev,
>  	struct cpufreq_frequency_table *freq_table = NULL;
>  	int i, max_opps, ret = 0;
>  	unsigned long rate;
> +#ifdef CONFIG_CPU_FREQ_BOOST_SW
> +	struct cpufreq_frequency_table *ft;
> +	int len, count;
> +	u32 *boost_freqs = NULL;
> +#endif
>  
>  	rcu_read_lock();
>  
> @@ -82,6 +88,45 @@ int dev_pm_opp_init_cpufreq_table(struct device *dev,
>  
>  	*table = &freq_table[0];
>  
> +#ifdef CONFIG_CPU_FREQ_BOOST_SW
> +	if (!of_find_property(dev->of_node, "boost-frequencies", &len))
> +		goto out;
> +
> +	if (!len || !IS_ALIGNED(len, sizeof(u32))) {
> +		dev_err(dev, "%s: invalid boost frequency\n", __func__);
> +		ret = -EINVAL;
> +		goto out;
> +	}
> +
> +	boost_freqs = kmalloc(len, GFP_KERNEL);
> +	if (!boost_freqs) {
> +		dev_err(dev, "%s: no memory for boost freq table\n", __func__);
> +		ret = -ENOMEM;
> +		goto out;
> +	}
> +
> +	count = len / sizeof(u32);
> +	of_property_read_u32_array(dev->of_node, "boost-frequencies",
> +			boost_freqs, count);
> +
> +	for (i = 0; i < count; i++) {
> +		cpufreq_for_each_valid_entry(ft, *table) {
> +			if (boost_freqs[i] == ft->frequency) {
> +				ft->flags |= CPUFREQ_BOOST_FREQ;
> +				pr_debug("%s: marked %d as boost frequency\n",
> +					__func__, boost_freqs[i]);
> +				break;
> +			}
> +		}
> +
> +		if (ft->frequency == CPUFREQ_TABLE_END)
> +			dev_err(dev, "%s: invalid boost frequency %d\n",
> +				__func__, boost_freqs[i]);
> +	}
> +
> +	kfree(boost_freqs);
> +#endif
> +
>  out:
>  	rcu_read_unlock();
>  	if (ret)
> 
I suggest the following checkpatch --strict warnings should be fixed.

@@ -0,0 +1,10 @@
+CHECK: Alignment should match open parenthesis
+#65: FILE: drivers/cpufreq/cpufreq_opp.c:110:
++      of_property_read_u32_array(dev->of_node, "boost-frequencies",
++                      boost_freqs, count);
+CHECK: Alignment should match open parenthesis
+#72: FILE: drivers/cpufreq/cpufreq_opp.c:117:
++                              pr_debug("%s: marked %d as boost
frequency\n",
++                                      __func__, boost_freqs[i]);
+If any of these errors are false positives, please report
+them to the maintainer, see CHECKPATCH in MAINTAINERS.

Otherwise,
For the entire series:
Acked-by: Nishanth Menon <nm@ti.com>

-- 
Regards,
Nishanth Menon

  reply	other threads:[~2014-05-29 20:51 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-29 14:38 [PATCH v5 0/2] cpufreq: opp: Add device tree based lookup of boost mode frequency Thomas Abraham
2014-05-29 14:38 ` [PATCH v5 1/2] cpufreq / OPP: Allow boost frequency to be looked up from device tree Thomas Abraham
2014-05-29 20:51   ` Nishanth Menon [this message]
2014-05-30  7:31   ` Lukasz Majewski
2014-05-29 14:38 ` [PATCH v5 2/2] Documentation: devicetree: Add boost-frequency binding to list boost mode frequency Thomas Abraham
2014-05-30  7:31   ` Lukasz Majewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=53879DD8.1060906@ti.com \
    --to=nm@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kgene.kim@samsung.com \
    --cc=l.majewski@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=rjw@rjwysocki.net \
    --cc=t.figa@samsung.com \
    --cc=thomas.ab@samsung.com \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).