devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sivaprakash Murugesan <sivaprak@codeaurora.org>
To: Sibi Sankar <sibis@codeaurora.org>
Cc: agross@kernel.org, bjorn.andersson@linaro.org,
	mturquette@baylibre.com, sboyd@kernel.org, robh+dt@kernel.org,
	linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-msm-owner@vger.kernel.org
Subject: Re: [PATCH 1/2] clk: qcom: Add DT bindings for ipq6018 apss clock controller
Date: Sun, 5 Apr 2020 13:49:31 +0530	[thread overview]
Message-ID: <5388bacc-217c-d14a-1e7e-26c72588a035@codeaurora.org> (raw)
In-Reply-To: <e94805e32d1264ca9a162891db26730e@codeaurora.org>

Hi Sibi,

Thanks for the review.

On 2/27/2020 4:08 PM, Sibi Sankar wrote:
> Hey Sivaprakash,
>
> On 2020-02-27 15:25, Sivaprakash Murugesan wrote:
>> add dt-binding for ipq6018 apss clock controller
>>
>> Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
>> ---
>>  .../devicetree/bindings/clock/qcom,apsscc.yaml     | 58 
>> ++++++++++++++++++++++
>>  include/dt-bindings/clock/qcom,apss-ipq6018.h      | 26 ++++++++++
>>  2 files changed, 84 insertions(+)
>>  create mode 100644 
>> Documentation/devicetree/bindings/clock/qcom,apsscc.yaml
>>  create mode 100644 include/dt-bindings/clock/qcom,apss-ipq6018.h
>>
>> diff --git a/Documentation/devicetree/bindings/clock/qcom,apsscc.yaml
>> b/Documentation/devicetree/bindings/clock/qcom,apsscc.yaml
>> new file mode 100644
>> index 0000000..7433721
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/qcom,apsscc.yaml
>> @@ -0,0 +1,58 @@
>> +# SPDX-License-Identifier: GPL-2.0-only
>
> Dual license
ok.
>
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/bindings/clock/qcom,apsscc.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm IPQ6018 APSS Clock Controller Binding
>> +
>> +maintainers:
>> +  - Stephen Boyd <sboyd@kernel.org>
>> +
>> +description: |
>> +  Qualcomm IPQ6018 APSS clock control module which supports the 
>> clocks with
>> +  frequencies above 800Mhz.
>> +
>> +properties:
>> +  compatible :
>> +    const: qcom,apss-ipq6018
>
> Please use qcom,<chip>-<device>
> instead.
>
ok.
>> +
>> +  clocks:
>> +    description: clocks required for this controller.
>> +    maxItems: 4
>> +
>> +  clock-names:
>> +    description: clock output names of required clocks.
>> +    maxItems: 4
>> +
>> +  '#clock-cells':
>> +    const: 1
>> +
>> +  '#reset-cells':
>> +    const: 1
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - '#clock-cells'
>> +  - '#reset-cells'
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +      #include <dt-bindings/clock/qcom,gcc-ipq6018.h>
>> +      apss_clk: qcom,apss_clk@b111000 {
>> +            compatible = "qcom,apss-ipq6018";
>> +            clocks = <&xo>, <&gcc GPLL0>,
>> +                        <&gcc GPLL2>, <&gcc GPLL4>;
>> +            clock-names = "xo", "gpll0",
>> +                         "gpll2", "gpll4";
>> +            reg = <0xb11100c 0x5ff4>;
>> +            #clock-cells = <1>;
>> +            #reset-cells = <1>;
>> +      };
>> +...
>> diff --git a/include/dt-bindings/clock/qcom,apss-ipq6018.h
>> b/include/dt-bindings/clock/qcom,apss-ipq6018.h
>> new file mode 100644
>> index 0000000..ed9d7d8
>> --- /dev/null
>> +++ b/include/dt-bindings/clock/qcom,apss-ipq6018.h
>> @@ -0,0 +1,26 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * Copyright (c) 2016-2018, The Linux Foundation. All rights reserved.
>> + *
>> + * Permission to use, copy, modify, and/or distribute this software 
>> for any
>> + * purpose with or without fee is hereby granted, provided that the 
>> above
>> + * copyright notice and this permission notice appear in all copies.
>> + *
>> + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL 
>> WARRANTIES
>> + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
>> + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE 
>> LIABLE FOR
>> + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY 
>> DAMAGES
>> + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER 
>> IN AN
>> + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING 
>> OUT OF
>> + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
>
> ^^ is not needed just the SPDX
> license identifier is enough.
ok.
>
>> + */
>> +
>> +#ifndef _DT_BINDINGS_CLOCK_QCA_APSS_IPQ6018_H
>> +#define _DT_BINDINGS_CLOCK_QCA_APSS_IPQ6018_H
>> +
>> +#define APSS_PLL_EARLY                0
>> +#define APSS_PLL                1
>> +#define APCS_ALIAS0_CLK_SRC            2
>> +#define APCS_ALIAS0_CORE_CLK            3
>> +
>> +#endif
>

  parent reply	other threads:[~2020-04-05  8:19 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-27  9:55 [PATCH 0/2] Add APSS clock controller support for IPQ6018 Sivaprakash Murugesan
2020-02-27  9:55 ` [PATCH 1/2] clk: qcom: Add DT bindings for ipq6018 apss clock controller Sivaprakash Murugesan
2020-02-27 10:38   ` Sibi Sankar
2020-02-27 10:55     ` Sivaprakash Murugesan
2020-04-05  8:19     ` Sivaprakash Murugesan [this message]
2020-02-27 17:14   ` Rob Herring
2020-03-04  5:24     ` Sivaprakash Murugesan
2020-03-09 21:07       ` Rob Herring
2020-03-09 21:13   ` Rob Herring
2020-04-05  8:30     ` Sivaprakash Murugesan
2020-02-27  9:55 ` [PATCH 2/2] clk: qcom: Add " Sivaprakash Murugesan
2020-02-27 17:40   ` kbuild test robot
2020-02-27 17:40   ` [RFC PATCH] clk: qcom: apss_pll_offsets[] can be static kbuild test robot
2020-03-09 20:24   ` [PATCH 2/2] clk: qcom: Add ipq6018 apss clock controller Stephen Boyd
2020-04-05  8:26     ` Sivaprakash Murugesan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5388bacc-217c-d14a-1e7e-26c72588a035@codeaurora.org \
    --to=sivaprak@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm-owner@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=sibis@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).