From mboxrd@z Thu Jan 1 00:00:00 1970 From: trem Subject: Re: [PATCHi v3] iio: add support of the max1027 Date: Sat, 31 May 2014 23:46:30 +0200 Message-ID: <538A4DB6.1010107@yahoo.fr> References: <1401398520-8625-1-git-send-email-tremyfr@yahoo.fr> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Sender: linux-iio-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Jonathan Cameron Cc: Philippe Reynes , linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, armadeus-forum-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org, knaack.h-Mmb7MZpHnFY@public.gmane.org, lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org Hi Jonathan, On 30/05/14 18:29, Jonathan Cameron wrote: > > > On May 29, 2014 10:22:00 PM GMT+01:00, Philippe Reynes wrote: >> This driver add partial support of the >> maxim 1027/1029/1031. Differential mode is not >> supported. >> >> It was tested on armadeus apf27 board. >> >> Signed-off-by: Philippe Reynes > > One last thing from me. >> --- >> .../devicetree/bindings/iio/adc/max1027-adc.txt | 22 + >> drivers/iio/adc/Kconfig | 9 + >> drivers/iio/adc/Makefile | 1 + >> drivers/iio/adc/max1027.c | 518 >> ++++++++++++++++++++ >> 4 files changed, 550 insertions(+), 0 deletions(-) >> create mode 100644 >> Documentation/devicetree/bindings/iio/adc/max1027-adc.txt >> create mode 100644 drivers/iio/adc/max1027.c >> >> Changelog: >> v3: (thanks Hartmut Knaack, Lars-Peter Clausen and Jonathan Cameron for >> the feedback) >> - move to drivers/iio/adc (was in staging) >> - clean binding doc >> - drop empty update_scan_mode callback >> - add a lock around single channel read code >> - remove useless wrappers around spi_write and spi_read >> - fix available scan mask (a bit was missing) >> - remove useless header >> - some others little cleanp >> >> v2: (thanks Hartmut Knaack and Jonathan Cameron for the feedback) >> - really use devm_* >> - use demux magic >> - use spi_read and spi_write (instead of spi_sync) >> - use define for register (instead of hardcoded value) >> >> diff --git a/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt >> b/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt >> new file mode 100644 >> index 0000000..a8770cc >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt >> @@ -0,0 +1,22 @@ >> +* Maxim 1027/1029/1031 Analog to Digital Converter (ADC) >> + >> +Required properties: >> + - compatible: Should be "maxim,max1027" or "maxim,max1029" or >> "maxim,max1031" >> + - reg: SPI chip select number for the device >> + - interrupt-parent: phandle to the parent interrupt controller >> + see: >> Documentation/devicetree/bindings/interrupt-controller/interrupts.txt >> + - interrupts: IRQ line for the ADC >> + see: >> Documentation/devicetree/bindings/interrupt-controller/interrupts.txt >> + >> +Recommended properties: >> +- spi-max-frequency: Definition as per >> + Documentation/devicetree/bindings/spi/spi-bus.txt >> + >> +Example: >> +adc@0 { >> + compatible = "maxim,max1027"; >> + reg =<0>; >> + interrupt-parent =<&gpio5>; >> + interrupts =<15 IRQ_TYPE_EDGE_RISING>; >> + spi-max-frequency =<1000000>; >> +}; >> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig >> index 24c28e3..517f886 100644 >> --- a/drivers/iio/adc/Kconfig >> +++ b/drivers/iio/adc/Kconfig >> @@ -119,6 +119,15 @@ config LP8788_ADC >> help >> Say yes here to build support for TI LP8788 ADC. >> >> +config MAX1027 >> + tristate "Maxim max1027 ADC driver" >> + depends on SPI >> + select IIO_BUFFER >> + select IIO_TRIGGERED_BUFFER >> + help >> + Say yes here to build support for Maxim SPI ADC models >> + max1027, max1029 and max1031. >> + >> config MAX1363 >> tristate "Maxim max1363 ADC driver" >> depends on I2C >> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile >> index ab346d8..daac784 100644 >> --- a/drivers/iio/adc/Makefile >> +++ b/drivers/iio/adc/Makefile >> @@ -14,6 +14,7 @@ obj-$(CONFIG_AD7887) += ad7887.o >> obj-$(CONFIG_AT91_ADC) += at91_adc.o >> obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o >> obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o >> +obj-$(CONFIG_MAX1027) += max1027.o >> obj-$(CONFIG_MAX1363) += max1363.o >> obj-$(CONFIG_MCP320X) += mcp320x.o >> obj-$(CONFIG_MCP3422) += mcp3422.o >> diff --git a/drivers/iio/adc/max1027.c b/drivers/iio/adc/max1027.c >> new file mode 100644 >> index 0000000..6323510 >> --- /dev/null >> +++ b/drivers/iio/adc/max1027.c >> @@ -0,0 +1,518 @@ >> + /* >> + * iio/adc/max1027.c >> + * Copyright (C) 2014 Philippe Reynes >> + * >> + * based on linux/drivers/iio/ad7923.c >> + * Copyright 2011 Analog Devices Inc (from AD7923 Driver) >> + * Copyright 2012 CS Systemes d'Information >> + * >> + * This program is free software; you can redistribute it and/or >> modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> + * >> + * max1027.c >> + * >> + * Partial support for max1027 and similar chips. >> + */ >> + >> +#include >> +#include >> +#include >> +#include >> + >> +#include >> +#include >> +#include >> +#include >> +#include >> + >> +#define MAX1027_CONV_REG 0x80 >> +#define MAX1027_SETUP_REG 0x40 >> +#define MAX1027_AVG_REG 0x20 >> +#define MAX1027_RST_REG 0x10 >> + >> +/* conversion register */ >> +#define MAX1027_TEMP 0x01 >> +#define MAX1027_SCAN_0_N (0x00<< 1) >> +#define MAX1027_SCAN_N_M (0x01<< 1) >> +#define MAX1027_SCAN_N (0x02<< 1) >> +#define MAX1027_NOSCAN (0x03<< 1) >> +#define MAX1027_CHAN(n) ((n)<< 3) >> + >> +/* setup register */ >> +#define MAX1027_UNIPOLAR 0x02 >> +#define MAX1027_BIPOLAR 0x03 >> +#define MAX1027_REF_MODE0 (0x00<< 2) >> +#define MAX1027_REF_MODE1 (0x01<< 2) >> +#define MAX1027_REF_MODE2 (0x02<< 2) >> +#define MAX1027_REF_MODE3 (0x03<< 2) >> +#define MAX1027_CKS_MODE0 (0x00<< 4) >> +#define MAX1027_CKS_MODE1 (0x01<< 4) >> +#define MAX1027_CKS_MODE2 (0x02<< 4) >> +#define MAX1027_CKS_MODE3 (0x03<< 4) >> + >> +/* averaging register */ >> +#define MAX1027_NSCAN_4 0x00 >> +#define MAX1027_NSCAN_8 0x01 >> +#define MAX1027_NSCAN_12 0x02 >> +#define MAX1027_NSCAN_16 0x03 >> +#define MAX1027_NAVG_4 (0x00<< 2) >> +#define MAX1027_NAVG_8 (0x01<< 2) >> +#define MAX1027_NAVG_16 (0x02<< 2) >> +#define MAX1027_NAVG_32 (0x03<< 2) >> +#define MAX1027_AVG_EN (0x01<< 4) >> + >> +enum max1027_id { >> + max1027, >> + max1029, >> + max1031, >> +}; >> + >> +static const struct spi_device_id max1027_id[] = { >> + {"max1027", max1027}, >> + {"max1029", max1029}, >> + {"max1031", max1031}, >> + {} >> +}; >> +MODULE_DEVICE_TABLE(spi, max1027_id); >> + >> +#ifdef CONFIG_OF >> +static const struct of_device_id max1027_adc_dt_ids[] = { >> + { .compatible = "maxim,max1027" }, >> + { .compatible = "maxim,max1029" }, >> + { .compatible = "maxim,max1031" }, >> + {}, >> +}; >> +MODULE_DEVICE_TABLE(of, max1027_adc_dt_ids); >> +#endif >> + >> +#define MAX1027_V_CHAN(index) \ >> + { \ >> + .type = IIO_VOLTAGE, \ >> + .indexed = 1, \ >> + .channel = index, \ >> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ >> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ >> + .scan_index = index+1, \ >> + .scan_type = { \ >> + .sign = 'u', \ >> + .realbits = 10, \ >> + .storagebits = 16, \ >> + .shift = 2, \ >> + .endianness = IIO_BE, \ >> + }, \ >> + } >> + >> +#define MAX1027_T_CHAN(index) \ >> + { \ >> + .type = IIO_TEMP, \ >> + .channel = index, \ >> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ >> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ >> + .scan_index = index, \ >> + .scan_type = { \ >> + .sign = 'u', \ >> + .realbits = 12, \ >> + .storagebits = 16, \ >> + .endianness = IIO_BE, \ >> + }, \ >> + } >> + >> +static const struct iio_chan_spec max1027_channels[] = { >> + MAX1027_T_CHAN(0), >> + MAX1027_V_CHAN(0), >> + MAX1027_V_CHAN(1), >> + MAX1027_V_CHAN(2), >> + MAX1027_V_CHAN(3), >> + MAX1027_V_CHAN(4), >> + MAX1027_V_CHAN(5), >> + MAX1027_V_CHAN(6), >> + MAX1027_V_CHAN(7) >> +}; >> + >> +static const struct iio_chan_spec max1029_channels[] = { >> + MAX1027_T_CHAN(0), >> + MAX1027_V_CHAN(0), >> + MAX1027_V_CHAN(1), >> + MAX1027_V_CHAN(2), >> + MAX1027_V_CHAN(3), >> + MAX1027_V_CHAN(4), >> + MAX1027_V_CHAN(5), >> + MAX1027_V_CHAN(6), >> + MAX1027_V_CHAN(7), >> + MAX1027_V_CHAN(8), >> + MAX1027_V_CHAN(9), >> + MAX1027_V_CHAN(10), >> + MAX1027_V_CHAN(11) >> +}; >> + >> +static const struct iio_chan_spec max1031_channels[] = { >> + MAX1027_T_CHAN(0), >> + MAX1027_V_CHAN(0), >> + MAX1027_V_CHAN(1), >> + MAX1027_V_CHAN(2), >> + MAX1027_V_CHAN(3), >> + MAX1027_V_CHAN(4), >> + MAX1027_V_CHAN(5), >> + MAX1027_V_CHAN(6), >> + MAX1027_V_CHAN(7), >> + MAX1027_V_CHAN(8), >> + MAX1027_V_CHAN(9), >> + MAX1027_V_CHAN(10), >> + MAX1027_V_CHAN(11), >> + MAX1027_V_CHAN(12), >> + MAX1027_V_CHAN(13), >> + MAX1027_V_CHAN(14), >> + MAX1027_V_CHAN(15) >> +}; >> + >> +static unsigned long max1027_available_scan_masks[] = { >> + 0x000001ff, >> + 0x00000000, >> +}; >> + >> +static unsigned long max1029_available_scan_masks[] = { >> + 0x00001fff, >> + 0x00000000, >> +}; >> + >> +static unsigned long max1031_available_scan_masks[] = { >> + 0x0001ffff, >> + 0x00000000, >> +}; >> + >> +struct max1027_chip_info { >> + const struct iio_chan_spec *channels; >> + unsigned int num_channels; >> + unsigned long *available_scan_masks; >> +}; >> + >> +static const struct max1027_chip_info max1027_chip_info_tbl[] = { >> + [max1027] = { >> + .channels = max1027_channels, >> + .num_channels = ARRAY_SIZE(max1027_channels), >> + .available_scan_masks = max1027_available_scan_masks, >> + }, >> + [max1029] = { >> + .channels = max1029_channels, >> + .num_channels = ARRAY_SIZE(max1029_channels), >> + .available_scan_masks = max1029_available_scan_masks, >> + }, >> + [max1031] = { >> + .channels = max1031_channels, >> + .num_channels = ARRAY_SIZE(max1031_channels), >> + .available_scan_masks = max1031_available_scan_masks, >> + }, >> +}; >> + >> +struct max1027_state { >> + struct max1027_chip_info *info; >> + struct spi_device *spi; >> + struct iio_trigger *trig; >> + u16 *buffer; >> + struct mutex lock; >> +}; >> + >> +static int max1027_read_single_value(struct iio_dev *indio_dev, >> + struct iio_chan_spec const *chan, >> + int *val) >> +{ >> + int ret; >> + unsigned char reg; >> + struct max1027_state *st = iio_priv(indio_dev); >> + >> + if (iio_buffer_enabled(indio_dev)) { >> + dev_warn(&indio_dev->dev, "trigger mode already enabled"); >> + return -EIO; >> + } >> + >> + /* Start acquisition on conversion register write */ >> + reg = MAX1027_SETUP_REG | MAX1027_REF_MODE2 | MAX1027_CKS_MODE2; >> + ret = spi_write(st->spi, (void *)®, 1); >> + if (ret< 0) { >> + dev_err(&indio_dev->dev, >> + "Failed to configure setup register\n"); >> + return ret; >> + } >> + >> + /* Configure conversion register with the requested chan */ >> + reg = MAX1027_CONV_REG | MAX1027_CHAN(chan->channel) >> + | MAX1027_NOSCAN | !!(chan->type == IIO_TEMP); >> + ret = spi_write(st->spi, (void *)®, 1); >> + if (ret< 0) { >> + dev_err(&indio_dev->dev, >> + "Failed to configure conversion register\n"); >> + return ret; >> + } >> + >> + /* >> + * For an unknown reason, when we use the mode "10" (write >> + * conversion register), the it doesn't occur every time. >> + * So we just wait 1 ms. >> + */ >> + mdelay(1); >> + >> + /* Read result */ >> + ret = spi_read(st->spi, st->buffer, (chan->type == IIO_TEMP) ? 4 : >> 2); >> + if (ret< 0) >> + return ret; >> + >> + *val = be16_to_cpu(st->buffer[0]); >> + >> + return IIO_VAL_INT; >> +} >> + >> +static int max1027_read_raw(struct iio_dev *indio_dev, >> + struct iio_chan_spec const *chan, >> + int *val, int *val2, long mask) >> +{ >> + int ret = 0; >> + struct max1027_state *st = iio_priv(indio_dev); >> + >> + mutex_lock(&st->lock); >> + >> + switch (mask) { >> + case IIO_CHAN_INFO_RAW: >> + ret = max1027_read_single_value(indio_dev, chan, val); >> + break; >> + case IIO_CHAN_INFO_SCALE: >> + switch (chan->type) { >> + case IIO_TEMP: >> + *val = 1; >> + *val2 = 8; >> + ret = IIO_VAL_FRACTIONAL; >> + break; >> + case IIO_VOLTAGE: >> + *val = 2500; >> + *val2 = 10; >> + ret = IIO_VAL_FRACTIONAL_LOG2; >> + break; >> + default: >> + ret = -EINVAL; >> + break; >> + }; >> + break; >> + default: >> + ret = -EINVAL; >> + break; >> + }; >> + >> + mutex_unlock(&st->lock); >> + >> + return ret; >> +} >> + >> +static int max1027_debugfs_reg_access(struct iio_dev *indio_dev, >> + unsigned reg, unsigned writeval, >> + unsigned *readval) >> +{ >> + unsigned char val; >> + struct max1027_state *st = iio_priv(indio_dev); >> + >> + if (readval != NULL) >> + return -EINVAL; >> + >> + val = (unsigned char)writeval; >> + return spi_write(st->spi, (void *)&val, 1); >> +} >> + >> +static int max1027_set_trigger_state(struct iio_trigger *trig, bool >> state) >> +{ >> + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); >> + struct max1027_state *st = iio_priv(indio_dev); >> + unsigned char reg; >> + int ret; >> + >> + if (state) { >> + /* Start acquisition on cnvst */ >> + reg = MAX1027_SETUP_REG | MAX1027_CKS_MODE0 | MAX1027_REF_MODE2; >> + ret = spi_write(st->spi, (void *)®, 1); >> + if (ret< 0) >> + return ret; >> + >> + /* Scan from 0 to max */ >> + reg = MAX1027_CONV_REG | MAX1027_CHAN(0) >> + | MAX1027_SCAN_N_M | MAX1027_TEMP; >> + ret = spi_write(st->spi, (void *)®, 1); >> + if (ret< 0) >> + return ret; >> + } else { >> + /* Start acquisition on conversion register write */ >> + reg = MAX1027_SETUP_REG | MAX1027_CKS_MODE2 | MAX1027_REF_MODE2; >> + ret = spi_write(st->spi, (void *)®, 1); >> + if (ret< 0) >> + return ret; >> + } >> + >> + return 0; >> +} >> + > > This is a very common case so we have a generic function for it so use that... > > iio_trigger_generic_data_poll > Note that the private data is the trigger structure rather than the iio_Dev I've done a v4 with iio_trigger_generic_data_rdy_poll. > Also if this only works of the buffer is enabled you need to enforce that using the relevant call backs... Validate_device and validate_trigger. Probably start by only letting the device and trigger bind. I'm sorry, I don't see what should be done in those callback (IRQ is always enabled). May you help/explain me what is expected in those callback please . For now, I send a v4 without those callback. > One day we will work out a clean way of falling back to polled reads if using any other trigger! > >> +static irqreturn_t max1027_interrupt_handler(int irq, void *private) >> +{ >> + struct iio_dev *indio_dev = (struct iio_dev *)private; >> + >> + pr_debug("%s(irq=%d, private=0x%p)\n", __func__, irq, private); >> + >> + if (iio_buffer_enabled(indio_dev)) >> + iio_trigger_poll(indio_dev->trig, iio_get_time_ns()); >> + >> + return IRQ_HANDLED; >> +} >> + >> +static irqreturn_t max1027_trigger_handler(int irq, void *private) >> +{ >> + struct iio_poll_func *pf = (struct iio_poll_func *)private; >> + struct iio_dev *indio_dev = pf->indio_dev; >> + struct max1027_state *st = iio_priv(indio_dev); >> + >> + pr_debug("%s(irq=%d, private=0x%p)\n", __func__, irq, private); >> + >> + /* fill buffer with all channel */ >> + spi_read(st->spi, st->buffer, indio_dev->masklength * 2); >> + >> + iio_push_to_buffers_with_timestamp(indio_dev, st->buffer, >> + iio_get_time_ns()); >> + >> + iio_trigger_notify_done(indio_dev->trig); >> + >> + return IRQ_HANDLED; >> +} >> + >> +static const struct iio_trigger_ops max1027_trigger_ops = { >> + .owner = THIS_MODULE, >> + .set_trigger_state =&max1027_set_trigger_state, >> +}; >> + >> +static const struct iio_info max1027_info = { >> + .driver_module = THIS_MODULE, >> + .read_raw =&max1027_read_raw, >> + .debugfs_reg_access =&max1027_debugfs_reg_access, >> +}; >> + >> +static int max1027_probe(struct spi_device *spi) >> +{ >> + int err; >> + unsigned char reg; >> + struct iio_dev *indio_dev; >> + struct max1027_state *st; >> + >> + pr_debug("%s: probe(spi = 0x%p)\n", __func__, spi); >> + >> + /* allocate iio device */ >> + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); >> + if (indio_dev == NULL) { >> + pr_err("can't allocate iio device\n"); >> + return -ENOMEM; >> + } >> + >> + spi_set_drvdata(spi, indio_dev); >> + >> + st = iio_priv(indio_dev); >> + st->spi = spi; >> + st->buffer = NULL; >> + st->info = (struct max1027_chip_info *) >> + &max1027_chip_info_tbl[spi_get_device_id(spi)->driver_data]; >> + >> + mutex_init(&st->lock); >> + >> + /* request irq */ >> + err = devm_request_threaded_irq(&spi->dev, spi->irq, >> + max1027_interrupt_handler, >> + NULL, >> + IRQF_TRIGGER_FALLING, >> + spi->dev.driver->name, indio_dev); >> + if (err< 0) { >> + dev_err(&indio_dev->dev, "Failed to allocate IRQ.\n"); >> + return err; >> + } >> + >> + indio_dev->name = spi_get_device_id(spi)->name; >> + indio_dev->dev.parent =&spi->dev; >> + indio_dev->info =&max1027_info; >> + indio_dev->modes = INDIO_DIRECT_MODE; >> + indio_dev->channels = st->info->channels; >> + indio_dev->num_channels = st->info->num_channels; >> + indio_dev->available_scan_masks = st->info->available_scan_masks; >> + >> + /* Allocate buffer (data) */ >> + st->buffer = devm_kmalloc(&indio_dev->dev, >> + indio_dev->num_channels * 2, >> + GFP_KERNEL); >> + if (st->buffer == NULL) { >> + dev_err(&indio_dev->dev, "Can't allocate bufffer\n"); >> + return -ENOMEM; >> + } >> + >> + /* Allocate buffer */ >> + err = iio_triggered_buffer_setup(indio_dev,&iio_pollfunc_store_time, >> + &max1027_trigger_handler, NULL); >> + if (err< 0) { >> + dev_err(&indio_dev->dev, "Failed to setup buffer\n"); >> + return err; >> + } >> + >> + /* Allocate trigger */ >> + st->trig = devm_iio_trigger_alloc(&spi->dev, "%s-trigger", >> + indio_dev->name); >> + if (st->trig == NULL) { >> + err = -ENOMEM; >> + dev_err(&indio_dev->dev, "Failed to allocate iio trigger\n"); >> + goto fail_trigger_alloc; >> + } >> + >> + /* configure and register trigger */ >> + st->trig->ops =&max1027_trigger_ops; >> + st->trig->dev.parent =&spi->dev; >> + iio_trigger_set_drvdata(st->trig, indio_dev); >> + iio_trigger_register(st->trig); >> + >> + /* Disable averaging */ >> + reg = MAX1027_AVG_REG; >> + err = spi_write(st->spi, (void *)®, 1); >> + if (err< 0) { >> + dev_err(&indio_dev->dev, "Failed to configure averaging >> register\n"); >> + goto fail_dev_register; >> + } >> + >> + /* Register the device */ >> + err = iio_device_register(indio_dev); >> + if (err< 0) { >> + dev_err(&indio_dev->dev, "Failed to register iio device\n"); >> + goto fail_dev_register; >> + } >> + >> + return 0; >> + >> +fail_dev_register: >> +fail_trigger_alloc: >> + iio_triggered_buffer_cleanup(indio_dev); >> + >> + return err; >> +} >> + >> +static int max1027_remove(struct spi_device *spi) >> +{ >> + struct iio_dev *indio_dev = spi_get_drvdata(spi); >> + >> + pr_debug("%s: remove(spi = 0x%p)\n", __func__, spi); >> + >> + iio_device_unregister(indio_dev); >> + iio_triggered_buffer_cleanup(indio_dev); >> + >> + return 0; >> +} >> + >> +static struct spi_driver max1027_driver = { >> + .driver = { >> + .name = "max1027", >> + .owner = THIS_MODULE, >> + }, >> + .probe = max1027_probe, >> + .remove = max1027_remove, >> + .id_table = max1027_id, >> +}; >> +module_spi_driver(max1027_driver); >> + >> +MODULE_AUTHOR("Philippe Reynes"); >> +MODULE_DESCRIPTION("MAX1027/MAX1029/MAX1031 ADC"); >> +MODULE_LICENSE("GPL v2"); > Regards, Philippe