From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Wahren Subject: Re: [PATCH] arm64: dts: broadcom: Use the .dtb name in the rule, rather than .dts Date: Mon, 24 Sep 2018 13:03:41 +0200 Message-ID: <539eb374-9122-6c09-4c64-80bfa6b7bf89@i2se.com> References: <20180924102228.19656-1-liviu@dudau.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20180924102228.19656-1-liviu@dudau.co.uk> Content-Language: en-US List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Liviu Dudau , Arnd Bergmann , Olof Johansson Cc: Mark Rutland , devicetree@vger.kernel.org, Florian Fainelli , arm-soc , Scott Branden , Ray Jui , Phil Elwell , Eric Anholt , Rob Herring , bcm-kernel-feedback-list@broadcom.com, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org Am 24.09.2018 um 12:22 schrieb Liviu Dudau: > Commit a7eb26392b893 ("arm64: dts: broadcom: Add reference to Compute > Module IO Board V3") adds the bcm2837-rpi-cm3-io3.dts file as a target > in the Makefile, rather than the .dtb name. This will skip the > generation of the .dtb file at compile time and will fail the dtbs_install > target. > > Fixes: a7eb26392b893 ("arm64: dts: broadcom: Add reference to Compute > Module IO Board V3") > > Signed-off-by: Liviu Dudau Acked-by: Stefan Wahren Thanks, i will add a dtbs_install step to my test jobs. @Arnd @Olof Should this fix for 4.20 go via pull request or can you apply it directly to your tree? > --- > arch/arm64/boot/dts/broadcom/Makefile | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile > index 3d98f5f5ab88..667ca989c11b 100644 > --- a/arch/arm64/boot/dts/broadcom/Makefile > +++ b/arch/arm64/boot/dts/broadcom/Makefile > @@ -1,7 +1,7 @@ > # SPDX-License-Identifier: GPL-2.0 > dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb \ > bcm2837-rpi-3-b-plus.dtb \ > - bcm2837-rpi-cm3-io3.dts > + bcm2837-rpi-cm3-io3.dtb > > subdir-y += northstar2 > subdir-y += stingray