From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?UTF-8?B?QW5kcmVhcyBGw6RyYmVy?= Subject: Re: [PATCH 1/4] Documentation: devicetree: Fix s2mps11 and s5m8767 typos Date: Tue, 24 Jun 2014 01:06:46 +0200 Message-ID: <53A8B306.1010903@suse.de> References: <1403486483-4063-1-git-send-email-afaerber@suse.de> <1403486483-4063-2-git-send-email-afaerber@suse.de> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: In-Reply-To: Sender: linux-doc-owner@vger.kernel.org To: Sachin Kamat Cc: linux-samsung-soc , Stephan van Schaik , Vincent Palatin , Doug Anderson , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Randy Dunlap , Lee Jones , Mark Brown , Krzysztof Kozlowski , Yadwinder Singh Brar , Tomasz Figa , Sachin Kamat , "OPEN FIRMWARE AND..." , DOCUMENTATION , LKML List-Id: devicetree@vger.kernel.org Am 23.06.2014 05:21, schrieb Sachin Kamat: > On Mon, Jun 23, 2014 at 6:51 AM, Andreas F=C3=A4rber wrote: >> It's LDO2, not LD02. >> >> Signed-off-by: Andreas F=C3=A4rber >> --- >> Documentation/devicetree/bindings/mfd/s2mps11.txt |= 2 +- >> Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt |= 2 +- >> 2 files changed, 2 insertions(+), 2 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Doc= umentation/devicetree/bindings/mfd/s2mps11.txt >> index d81ba30..55ab4f4 100644 >> --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt >> +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt >> @@ -81,7 +81,7 @@ as per the datasheet of s2mps11. >> - valid values for n are: >> - S2MPS11: 1 to 38 >> - S2MPS14: 1 to 25 >> - - Example: LDO1, LD02, LDO28 >> + - Example: LDO1, LDO2, LDO28 >> - BUCKn >> - valid values for n are: >> - S2MPS11: 1 to 10 >> diff --git a/Documentation/devicetree/bindings/regulator/s5m8767-reg= ulator.txt b/Documentation/devicetree/bindings/regulator/s5m8767-regula= tor.txt >> index d290988..2019131 100644 >> --- a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.= txt >> +++ b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.= txt >> @@ -86,7 +86,7 @@ as per the datasheet of s5m8767. >> >> - LDOn >> - valid values for n are 1 to 28 >> - - Example: LDO1, LD02, LDO28 >> + - Example: LDO1, LDO2, LDO28 >> - BUCKn >> - valid values for n are 1 to 9. >> - Example: BUCK1, BUCK2, BUCK9 >> -- >=20 > Very keen observation :) >=20 > Reviewed-by: Sachin Kamat A font that distinguishes the zero with a dot or dash helps! :) I was wondering which character to type, and found two undocumented s5m8767_pmic properties downstream (s5m-core,enable-low-jitter and s5m-core,device_type =3D <0x2>), which I then left out. Cheers, Andreas --=20 SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 N=C3=BCrnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imend=C3=B6rffer; HRB 16746 AG N=C3= =BCrnberg