From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hans de Goede Subject: Re: [PATCH 6/9] ARM: dts: sun7i: Add board support for LinkSprite pcDuino V3 Date: Tue, 01 Jul 2014 09:12:32 +0200 Message-ID: <53B25F60.2050704@redhat.com> References: <1404165479-23785-1-git-send-email-hdegoede@redhat.com> <1404165479-23785-7-git-send-email-hdegoede@redhat.com> Reply-To: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Return-path: In-Reply-To: List-Post: , List-Help: , List-Archive: Sender: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org List-Subscribe: , List-Unsubscribe: , To: Chen-Yu Tsai Cc: Maxime Ripard , Carlo Caione , Zoltan HERPAI , linux-arm-kernel , devicetree , linux-sunxi List-Id: devicetree@vger.kernel.org Hi, On 07/01/2014 04:22 AM, Chen-Yu Tsai wrote: > On Tue, Jul 1, 2014 at 5:57 AM, Hans de Goede wrote: >> From: Zoltan HERPAI >> >> The LinkSprite pcDuino V3 is an A20 based development board featuring >> arduino compatible io headers, 1G RAM, 4G nand, sata, rtl8188cus usb wifi >> and 100 Mbit ethernet using an ip101a phy: >> >> http://www.pcduino.com/pcduino-v3/ >> >> Signed-off-by: Zoltan HERPAI >> [hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org: Various cleanups, correct led pins] >> [hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org: Add axp209, ir and gpio-keys nodes] >> Signed-off-by: Hans de Goede >> >> -- >> >> Changes since v2: >> - update MMC entry to comply with upstream >> - unify the 4 patches into one >> >> Changes since v1: >> - fix cosmetic issues >> - fix i2c entry >> - remove unnecessary input bindings include >> - add MMC support >> --- >> arch/arm/boot/dts/Makefile | 3 +- >> arch/arm/boot/dts/sun7i-a20-pcduino3.dts | 173 +++++++++++++++++++++++++++++++ >> 2 files changed, 175 insertions(+), 1 deletion(-) >> create mode 100644 arch/arm/boot/dts/sun7i-a20-pcduino3.dts >> >> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >> index ed0de8b..fdc590e 100644 >> --- a/arch/arm/boot/dts/Makefile >> +++ b/arch/arm/boot/dts/Makefile >> @@ -380,7 +380,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \ >> sun7i-a20-cubieboard2.dtb \ >> sun7i-a20-cubietruck.dtb \ >> sun7i-a20-i12-tvbox.dtb \ >> - sun7i-a20-olinuxino-micro.dtb >> + sun7i-a20-olinuxino-micro.dtb \ >> + sun7i-a20-pcduino3.dtb > > You may need to rebase onto my sun8i ippo-q8h dts patch. > > https://patchwork.kernel.org/patch/4389951/ > > There's a likely conflict in the Makefile here. Has that one already been accepted by Maxime ? I'm fine rebasing patches on top of accepted stuff, but rebasing on pending stuff is not really useful IMHO. Regards, Hans