From: Santosh Shilimkar <santosh.shilimkar-l0cyMroinI0@public.gmane.org>
To: Grygorii Strashko <grygorii.strashko-l0cyMroinI0@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
ivan.khoronzhuk-l0cyMroinI0@public.gmane.org,
WingMan Kwok <w-kwok2-l0cyMroinI0@public.gmane.org>
Subject: Re: [PATCH] ARM: dts: keystone: fix netcp's clocks definitions
Date: Tue, 8 Jul 2014 12:19:52 -0400 [thread overview]
Message-ID: <53BC1A28.3080608@ti.com> (raw)
In-Reply-To: <1404834184-5411-1-git-send-email-grygorii.strashko-l0cyMroinI0@public.gmane.org>
On Tuesday 08 July 2014 11:43 AM, Grygorii Strashko wrote:
> The clocks tree for Keystone 2 NTCP devices should be
> defined as following:
> [refclk] - board dependent
> |- <papllclk> - PLL clock
> |- <paclk13> - fixed factor clock div=3 mul=1
> |- <clkpa> - gated clock
> |- <clkcpgmac> - gated clock
> |- <clksa> - gated clock
>
> Hence, update Keystone 2 DT to follow HW specification.
>
> Signed-off-by: WingMan Kwok <w-kwok2-l0cyMroinI0@public.gmane.org>
> Signed-off-by: Grygorii Strashko <grygorii.strashko-l0cyMroinI0@public.gmane.org>
> ---
Thanks for the patch. Queuing it up for 3.17
> arch/arm/boot/dts/k2e-clocks.dtsi | 2 +-
> arch/arm/boot/dts/k2hk-clocks.dtsi | 2 +-
> arch/arm/boot/dts/k2l-clocks.dtsi | 2 +-
> arch/arm/boot/dts/keystone-clocks.dtsi | 2 +-
> 4 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/k2e-clocks.dtsi b/arch/arm/boot/dts/k2e-clocks.dtsi
> index 90774d6..598afe9 100644
> --- a/arch/arm/boot/dts/k2e-clocks.dtsi
> +++ b/arch/arm/boot/dts/k2e-clocks.dtsi
> @@ -22,7 +22,7 @@ clocks {
> #clock-cells = <0>;
> compatible = "ti,keystone,pll-clock";
> clocks = <&refclkpass>;
> - clock-output-names = "pa-pll-clk";
> + clock-output-names = "papllclk";
> reg = <0x02620358 4>;
> reg-names = "control";
> };
> diff --git a/arch/arm/boot/dts/k2hk-clocks.dtsi b/arch/arm/boot/dts/k2hk-clocks.dtsi
> index 96e6536..d5adee3 100644
> --- a/arch/arm/boot/dts/k2hk-clocks.dtsi
> +++ b/arch/arm/boot/dts/k2hk-clocks.dtsi
> @@ -31,7 +31,7 @@ clocks {
> #clock-cells = <0>;
> compatible = "ti,keystone,pll-clock";
> clocks = <&refclkpass>;
> - clock-output-names = "pa-pll-clk";
> + clock-output-names = "papllclk";
> reg = <0x02620358 4>;
> reg-names = "control";
> };
> diff --git a/arch/arm/boot/dts/k2l-clocks.dtsi b/arch/arm/boot/dts/k2l-clocks.dtsi
> index f584b80..eb1e3e2 100644
> --- a/arch/arm/boot/dts/k2l-clocks.dtsi
> +++ b/arch/arm/boot/dts/k2l-clocks.dtsi
> @@ -31,7 +31,7 @@ clocks {
> #clock-cells = <0>;
> compatible = "ti,keystone,pll-clock";
> clocks = <&refclksys>;
> - clock-output-names = "pa-pll-clk";
> + clock-output-names = "papllclk";
> reg = <0x02620358 4>;
> reg-names = "control";
> };
> diff --git a/arch/arm/boot/dts/keystone-clocks.dtsi b/arch/arm/boot/dts/keystone-clocks.dtsi
> index 93f82c7..0c334b2 100644
> --- a/arch/arm/boot/dts/keystone-clocks.dtsi
> +++ b/arch/arm/boot/dts/keystone-clocks.dtsi
> @@ -215,7 +215,7 @@ clocks {
> clkpa: clkpa {
> #clock-cells = <0>;
> compatible = "ti,keystone,psc-clock";
> - clocks = <&chipclk16>;
> + clocks = <&paclk13>;
> clock-output-names = "pa";
> reg = <0x0235001c 0xb00>, <0x02350008 0x400>;
> reg-names = "control", "domain";
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2014-07-08 16:19 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-08 15:43 [PATCH] ARM: dts: keystone: fix netcp's clocks definitions Grygorii Strashko
[not found] ` <1404834184-5411-1-git-send-email-grygorii.strashko-l0cyMroinI0@public.gmane.org>
2014-07-08 16:19 ` Santosh Shilimkar [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53BC1A28.3080608@ti.com \
--to=santosh.shilimkar-l0cymroini0@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=grygorii.strashko-l0cyMroinI0@public.gmane.org \
--cc=ivan.khoronzhuk-l0cyMroinI0@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=w-kwok2-l0cyMroinI0@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).