From: Marc Kleine-Budde <mkl@pengutronix.de>
To: Varka Bhadram <varkabhadram@gmail.com>,
Dong Aisheng <b29396@freescale.com>
Cc: linux-can@vger.kernel.org, wg@grandegger.com,
socketcan@hartkopp.net, linux-arm-kernel@lists.infradead.org,
devicetree@vger.kernel.org, mark.rutland@arm.com
Subject: Re: [PATCH v4 2/2] can: m_can: add Bosch M_CAN controller support
Date: Tue, 15 Jul 2014 09:10:52 +0200 [thread overview]
Message-ID: <53C4D3FC.1030401@pengutronix.de> (raw)
In-Reply-To: <53C4D0B6.4010302@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 5226 bytes --]
On 07/15/2014 08:56 AM, Varka Bhadram wrote:
> On 07/15/2014 11:57 AM, Dong Aisheng wrote:
>> On Mon, Jul 14, 2014 at 06:17:17PM +0530, Varka Bhadram wrote:
>>>
>>> +/* Test Register (TEST) */
>>> +#define TEST_LBCK BIT(4)
>>> +
>>> +/* CC Control Register(CCCR) */
>>> +#define CCCR_TEST BIT(7)
>>> +#define CCCR_MON BIT(5)
>>> +#define CCCR_CCE BIT(1)
>>> +#define CCCR_INIT BIT(0)
>>> +
>>> +/* Bit Timing & Prescaler Register (BTP) */
>>> +#define BTR_BRP_MASK 0x3ff
>>> +#define BTR_BRP_SHIFT 16
>>> +#define BTR_TSEG1_SHIFT 8
>>> +#define BTR_TSEG1_MASK (0x3f << BTR_TSEG1_SHIFT)
>>> +#define BTR_TSEG2_SHIFT 4
>>> +#define BTR_TSEG2_MASK (0xf << BTR_TSEG2_SHIFT)
>>> +#define BTR_SJW_SHIFT 0
>>> +#define BTR_SJW_MASK 0xf
>>> +
>>> +/* Error Counter Register(ECR) */
>>> +#define ECR_RP BIT(15)
>>> +#define ECR_REC_SHIFT 8
>>> +#define ECR_REC_MASK (0x7f << ECR_REC_SHIFT)
>>> +#define ECR_TEC_SHIFT 0
>>> +#define ECR_TEC_MASK 0xff
>>> +
>>> +/* Protocol Status Register(PSR) */
>>> +#define PSR_BO BIT(7)
>>> +#define PSR_EW BIT(6)
>>> +#define PSR_EP BIT(5)
>>> +#define PSR_LEC_MASK 0x7
>>> +
>>> +/* Interrupt Register(IR) */
>>> +#define IR_ALL_INT 0xffffffff
>>> +#define IR_STE BIT(31)
>>> +#define IR_FOE BIT(30)
>>> +#define IR_ACKE BIT(29)
>>> +#define IR_BE BIT(28)
>>> +#define IR_CRCE BIT(27)
>>> +#define IR_WDI BIT(26)
>>> +#define IR_BO BIT(25)
>>> +#define IR_EW BIT(24)
>>> +#define IR_EP BIT(23)
>>> +#define IR_ELO BIT(22)
>>> +#define IR_BEU BIT(21)
>>> +#define IR_BEC BIT(20)
>>> +#define IR_DRX BIT(19)
>>> +#define IR_TOO BIT(18)
>>> +#define IR_MRAF BIT(17)
>>> +#define IR_TSW BIT(16)
>>> +#define IR_TEFL BIT(15)
>>> +#define IR_TEFF BIT(14)
>>> +#define IR_TEFW BIT(13)
>>> +#define IR_TEFN BIT(12)
>>> +#define IR_TFE BIT(11)
>>> +#define IR_TCF BIT(10)
>>> +#define IR_TC BIT(9)
>>> +#define IR_HPM BIT(8)
>>> +#define IR_RF1L BIT(7)
>>> +#define IR_RF1F BIT(6)
>>> +#define IR_RF1W BIT(5)
>>> +#define IR_RF1N BIT(4)
>>> +#define IR_RF0L BIT(3)
>>> +#define IR_RF0F BIT(2)
>>> +#define IR_RF0W BIT(1)
>>> +#define IR_RF0N BIT(0)
>>> +#define IR_ERR_STATE (IR_BO | IR_EW | IR_EP)
>>> +#define IR_ERR_LEC (IR_STE | IR_FOE | IR_ACKE | IR_BE | IR_CRCE)
>>> +#define IR_ERR_BUS (IR_ERR_LEC | IR_WDI | IR_ELO | IR_BEU | IR_BEC \
>>> + | IR_TOO | IR_MRAF | IR_TSW | IR_TEFL | IR_RF1L \
>>> + | IR_RF0L)
>>> +#define IR_ERR_ALL (IR_ERR_STATE | IR_ERR_BUS)
>>> +
>>> +/* Interrupt Line Select (ILS) */
>>> +#define ILS_ALL_INT0 0x0
>>> +#define ILS_ALL_INT1 0xFFFFFFFF
>>> +
>>> +/* Interrupt Line Enable (ILE) */
>>> +#define ILE_EINT0 BIT(0)
>>> +#define ILE_EINT1 BIT(1)
>>> +
>>> +/* Rx FIFO 0/1 Configuration (RXF0C/RXF1C) */
>>> +#define RXFC_FWM_OFF 24
>>> +#define RXFC_FWM_MASK 0x7f
>>> +#define RXFC_FWM_1 (1 << RXFC_FWM_OFF)
>>> +#define RXFC_FS_OFF 16
>>> +#define RXFC_FS_MASK 0x7f
>>> +
>>> +/* Rx FIFO 0/1 Status (RXF0S/RXF1S) */
>>> +#define RXFS_RFL BIT(25)
>>> +#define RXFS_FF BIT(24)
>>> +#define RXFS_FPI_OFF 16
>>> +#define RXFS_FPI_MASK 0x3f0000
>>> +#define RXFS_FGI_OFF 8
>>> +#define RXFS_FGI_MASK 0x3f00
>>> +#define RXFS_FFL_MASK 0x7f
>>> +
>>> +/* Tx Buffer Configuration(TXBC) */
>>> +#define TXBC_NDTB_OFF 16
>>> +#define TXBC_NDTB_MASK 0x3f
>>> +
>>> +/* Tx Buffer Element Size Configuration(TXESC) */
>>> +#define TXESC_TBDS_8BYTES 0x0
>>> +/* Tx Buffer Element */
>>> +#define TX_BUF_XTD BIT(30)
>>> +#define TX_BUF_RTR BIT(29)
>>> +
>>> +/* Rx Buffer Element Size Configuration(TXESC) */
>>> +#define M_CAN_RXESC_8BYTES 0x0
>>> +/* Tx Buffer Element */
>>> +#define RX_BUF_ESI BIT(31)
>>> +#define RX_BUF_XTD BIT(30)
>>> +#define RX_BUF_RTR BIT(29)
>>> +
>>> +/* Tx Event FIFO Con.guration (TXEFC) */
>>> +#define TXEFC_EFS_OFF 16
>>> +#define TXEFC_EFS_MASK 0x3f
>>> +
>>> +/* Message RAM Configuration (in bytes) */
>>> +#define SIDF_ELEMENT_SIZE 4
>>> +#define XIDF_ELEMENT_SIZE 8
>>> +#define RXF0_ELEMENT_SIZE 16
>>> +#define RXF1_ELEMENT_SIZE 16
>>> +#define RXB_ELEMENT_SIZE 16
>>> +#define TXE_ELEMENT_SIZE 8
>>> +#define TXB_ELEMENT_SIZE 16
>>> Alignment for all the includes
>>>
>> What do you mean?
>>
> I mean all the #define from top not aligned.
> It would be looks good if aligned properly.
>
> Give common tab spaces for all the #defines...
As I argumented in my other mail, I prefer one space, so no alignment.
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 242 bytes --]
next prev parent reply other threads:[~2014-07-15 7:10 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-14 11:40 [PATCH v4 1/2] can: m_can: add device tree binding documentation Dong Aisheng
2014-07-14 11:40 ` [PATCH v4 2/2] can: m_can: add Bosch M_CAN controller support Dong Aisheng
2014-07-14 12:13 ` Marc Kleine-Budde
2014-07-15 3:33 ` Dong Aisheng
2014-07-15 7:29 ` Marc Kleine-Budde
2014-07-15 8:26 ` Dong Aisheng
2014-07-15 8:46 ` Marc Kleine-Budde
2014-07-15 9:07 ` Dong Aisheng
2014-07-15 9:21 ` Marc Kleine-Budde
2014-07-15 10:40 ` Dong Aisheng
2014-07-14 12:47 ` Varka Bhadram
2014-07-14 13:01 ` Marc Kleine-Budde
2014-07-14 13:15 ` Varka Bhadram
2014-07-15 6:28 ` Dong Aisheng
2014-07-15 6:27 ` Dong Aisheng
2014-07-15 6:56 ` Varka Bhadram
2014-07-15 7:10 ` Marc Kleine-Budde [this message]
2014-07-15 7:15 ` Varka Bhadram
2014-07-15 7:14 ` Dong Aisheng
2014-07-15 7:20 ` Varka Bhadram
2014-07-14 11:52 ` [PATCH v4 1/2] can: m_can: add device tree binding documentation Marc Kleine-Budde
2014-07-15 2:26 ` Dong Aisheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53C4D3FC.1030401@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=b29396@freescale.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-can@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=socketcan@hartkopp.net \
--cc=varkabhadram@gmail.com \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).