devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Varka Bhadram <varkabhadram-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
	Maxime Ripard
	<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
	Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
	Alessandro Zummo
	<a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org>,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
Subject: Re: [PATCH v2 1/6] rtc: sun6i: Add sun6i RTC driver
Date: Wed, 23 Jul 2014 21:32:39 +0530	[thread overview]
Message-ID: <53CFDC9F.9060208@gmail.com> (raw)
In-Reply-To: <1406126338-15062-2-git-send-email-wens-jdAy2FN1RRM@public.gmane.org>


On Wednesday 23 July 2014 08:08 PM, Chen-Yu Tsai wrote:
> This patch introduces the driver for the RTC in the Allwinner A31 and
> A23 SoCs.
>
> Unlike the RTC found in A10/A20 SoCs, which was part of the timer, the
> RTC in A31/A23 are a separate hardware block, which also contain a few
> controls for the RTC block hardware (a regulator and RTC block GPIO pin
> latches), while also having separate interrupts for the alarms.
>
> The hardware is different enough to make a different driver for it.
>
(...)

> +Required properties:
> +- compatible : Should be "allwinner,sun6i-a31-rtc"
> +- reg: physical base address of the controller and length of memory mapped
> +  region.
> +- interrupts: IRQ line for the RTC alarm 0.
> +

proper indentation..
- compatible	: Should be "allwinner,sun6i-a31-rtc"
- reg		: physical base address of the controller and length of memory mapped
		  region.
- interrupts	: IRQ line for the RTC alarm 0.
....

> +Example:
> +

(...)

> +
> +	ret = devm_request_irq(&pdev->dev, chip->irq, sun6i_rtc_alarmirq,
> +			0, dev_name(&pdev->dev), chip);

should match open parenthesis...

devm_request_irq(&pdev->dev, chip->irq, sun6i_rtc_alarmirq,
		 0, dev_name(&pdev->dev), chip);

> +	if (ret) {
> +		dev_err(&pdev->dev, "Could not request IRQ\n");
> +		return ret;
> +	}
> +
> +	/* clear the alarm counter value */
> +	writel(0, chip->base + SUN6I_ALRM_COUNTER);
> +
> +	/* disable counter alarm */
> +	writel(0, chip->base + SUN6I_ALRM_EN);
> +
> +	/* disable counter alarm interrupt */
> +	writel(0, chip->base + SUN6I_ALRM_IRQ_EN);
> +
> +	/* disable week alarm */
> +	writel(0, chip->base + SUN6I_ALRM1_EN);
> +
> +	/* disable week alarm interrupt */
> +	writel(0, chip->base + SUN6I_ALRM1_IRQ_EN);
> +
> +	/* clear counter alarm pending interrupts */
> +	writel(SUN6I_ALRM_IRQ_STA_CNT_IRQ_PEND, chip->base +
> +			SUN6I_ALRM_IRQ_STA);
> +
> +	/* clear week alarm pending interrupts */
> +	writel(SUN6I_ALRM1_IRQ_STA_WEEK_IRQ_PEND, chip->base +
> +			SUN6I_ALRM1_IRQ_STA);
> +
> +	/* disable alarm wakeup */
> +	writel(0, chip->base + SUN6I_ALARM_CONFIG);
> +
> +	chip->rtc = rtc_device_register("rtc-sun6i", &pdev->dev,
> +			&sun6i_rtc_ops, THIS_MODULE);

dto....

> +	if (IS_ERR(chip->rtc)) {
> +		dev_err(&pdev->dev, "unable to register device\n");
> +		return PTR_ERR(chip->rtc);
> +	}
> +
> +	dev_info(&pdev->dev, "RTC enabled\n");
> +
> +	return 0;
> +}
> +
> +static int sun6i_rtc_remove(struct platform_device *pdev)
> +{
> +	struct sun6i_rtc_dev *chip = platform_get_drvdata(pdev);
> +
> +	rtc_device_unregister(chip->rtc);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id sun6i_rtc_dt_ids[] = {
> +	{ .compatible = "allwinner,sun6i-a31-rtc" },
> +	{ /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, sun6i_rtc_dt_ids);
> +
> +static struct platform_driver sun6i_rtc_driver = {
> +	.probe		= sun6i_rtc_probe,
> +	.remove		= sun6i_rtc_remove,
> +	.driver		= {
> +		.name		= "sun6i-rtc",
> +		.owner		= THIS_MODULE,

we can drop owner field....

> +		.of_match_table = sun6i_rtc_dt_ids,
> +	},
> +};
> +
> +module_platform_driver(sun6i_rtc_driver);
> +
> +MODULE_DESCRIPTION("sun6i RTC driver");
> +MODULE_AUTHOR("Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>");
> +MODULE_LICENSE("GPL");

-- 
-Varka Bhadram

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2014-07-23 16:02 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-23 14:38 [PATCH v2 0/6] ARM: sunxi: RTC support for A31/A23 Chen-Yu Tsai
     [not found] ` <1406126338-15062-1-git-send-email-wens-jdAy2FN1RRM@public.gmane.org>
2014-07-23 14:38   ` [PATCH v2 1/6] rtc: sun6i: Add sun6i RTC driver Chen-Yu Tsai
     [not found]     ` <1406126338-15062-2-git-send-email-wens-jdAy2FN1RRM@public.gmane.org>
2014-07-23 16:02       ` Varka Bhadram [this message]
     [not found]         ` <53CFDC9F.9060208-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-07-25  7:57           ` Chen-Yu Tsai
     [not found]             ` <CAGb2v6746P-9rtW3gjUS3ttkZeqW6gNbunXHiSidNag1gCmk0A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-07-25  8:13               ` Chen-Yu Tsai
2014-07-23 14:38   ` [PATCH v2 2/6] rtc: sunxi: Depend on platforms sun4i/sun7i that actually have the rtc Chen-Yu Tsai
2014-07-23 14:38   ` [PATCH v2 3/6] ARM: dts: sun6i: add rtc device node Chen-Yu Tsai
2014-07-23 14:38   ` [PATCH v2 4/6] ARM: dts: sun8i: " Chen-Yu Tsai
2014-07-23 14:38   ` [PATCH v2 5/6] ARM: sunxi: Add A31 RTC driver to sunxi_defconfig Chen-Yu Tsai
2014-07-23 14:38   ` [PATCH v2 6/6] ARM: sunxi: Add A31 RTC driver to multi_v7_defconfig Chen-Yu Tsai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=53CFDC9F.9060208@gmail.com \
    --to=varkabhadram-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
    --cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
    --cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
    --cc=wens-jdAy2FN1RRM@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).