From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jonathan Cameron Subject: Re: [PATCHv8 3/4] iio: devicetree: Add DT binding documentation for Exynos3250 ADC Date: Wed, 23 Jul 2014 21:58:58 +0100 Message-ID: <53D02212.5030705@kernel.org> References: <1405994696-3117-1-git-send-email-cw00.choi@samsung.com> <1405994696-3117-4-git-send-email-cw00.choi@samsung.com> Mime-Version: 1.0 Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1405994696-3117-4-git-send-email-cw00.choi@samsung.com> Sender: linux-doc-owner@vger.kernel.org To: Chanwoo Choi Cc: ch.naveen@samsung.com, arnd@arndb.de, kgene.kim@samsung.com, kyungmin.park@samsung.com, t.figa@samsung.com, linux-iio@vger.kernel.org, linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-doc@vger.kernel.org List-Id: devicetree@vger.kernel.org On 22/07/14 03:04, Chanwoo Choi wrote: > This patch add DT binding documentation for Exynos3250 ADC IP. Exynos3250 has > special clock ('sclk_adc') for ADC which provide clock to internal ADC. > > Signed-off-by: Chanwoo Choi > Acked-by: Kyungmin Park > Reviewed-by: Naveen Krishna Chatradhi > Reviewed-by: Tomasz Figa > Acked-by: Kukjin Kim > Acked-by: Arnd Bergmann Applied to the togreg branch of iio.git - pushed out as testing for now. > --- > .../devicetree/bindings/arm/samsung/exynos-adc.txt | 25 ++++++++++++++++++++-- > 1 file changed, 23 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt > index 832fe8c..adc61b0 100644 > --- a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt > +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt > @@ -14,14 +14,21 @@ Required properties: > for exynos4412/5250 controllers. > Must be "samsung,exynos-adc-v2" for > future controllers. > + Must be "samsung,exynos3250-adc" for > + controllers compatible with ADC of Exynos3250. > - reg: Contains ADC register address range (base address and > length) and the address of the phy enable register. > - interrupts: Contains the interrupt information for the timer. The > format is being dependent on which interrupt controller > the Samsung device uses. > - #io-channel-cells = <1>; As ADC has multiple outputs > -- clocks From common clock binding: handle to adc clock. > -- clock-names From common clock binding: Shall be "adc". > +- clocks From common clock bindings: handles to clocks specified > + in "clock-names" property, in the same order. > +- clock-names From common clock bindings: list of clock input names > + used by ADC block: > + - "adc" : ADC bus clock > + - "sclk" : ADC special clock (only for Exynos3250 and > + compatible ADC block) > - vdd-supply VDD input supply. > > Note: child nodes can be added for auto probing from device tree. > @@ -41,6 +48,20 @@ adc: adc@12D10000 { > vdd-supply = <&buck5_reg>; > }; > > +Example: adding device info in dtsi file for Exynos3250 with additional sclk > + > +adc: adc@126C0000 { > + compatible = "samsung,exynos3250-adc", "samsung,exynos-adc-v2; > + reg = <0x126C0000 0x100>, <0x10020718 0x4>; > + interrupts = <0 137 0>; > + #io-channel-cells = <1>; > + io-channel-ranges; > + > + clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>; > + clock-names = "adc", "sclk"; > + > + vdd-supply = <&buck5_reg>; > +}; > > Example: Adding child nodes in dts file > >