From: "Andreas Färber" <afaerber@suse.de>
To: Ajay Kumar <ajaykumar.rs@samsung.com>,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org
Cc: kgene.kim@samsung.com, inki.dae@samsung.com,
thierry.reding@gmail.com, seanpaul@google.com,
ajaynumb@gmail.com, jg1.han@samsung.com, joshi@samsung.com,
prashanth.g@samsung.com
Subject: Re: [PATCH V2] ARM: dts: Add DT changes for display on peach_pi
Date: Fri, 01 Aug 2014 18:54:25 +0200 [thread overview]
Message-ID: <53DBC641.3090601@suse.de> (raw)
In-Reply-To: <1406910258-28036-1-git-send-email-ajaykumar.rs@samsung.com>
Hi,
Am 01.08.2014 18:24, schrieb Ajay Kumar:
> Add DT nodes for panel-simple "auo,b133htn01" panel.
> Add backlight enable pin and backlight power supply for pwm-backlight.
> Also add panel phandle needed by dp to enable display on peach_pi.
>
> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
> ---
> Changes since V1:
> Remove "simple-panel" compatible string and use only ""auo,b133htn01".
>
> arch/arm/boot/dts/exynos5800-peach-pi.dts | 27 ++++++++++-----------------
> 1 file changed, 10 insertions(+), 17 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
> index f3ee48b..f8c2e61 100644
> --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
> +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
> @@ -28,11 +28,13 @@
> i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel";
> };
>
> - backlight {
> + backlight: backlight {
> compatible = "pwm-backlight";
> pwms = <&pwm 0 1000000 0>;
> brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
> default-brightness-level = <7>;
> + enable-gpios = <&gpx2 2 0>;
For Spring I was asked to use GPIO_ACTIVE_* - here that would mean
s/0/GPIO_ACTIVE_HIGH/ IIUC and if necessary
#include <dt-bindings/gpio/gpio.h> before the .dtsi #include.
A modified version of your patch for Snow, rebased onto my cleanups, can
be found on my spring-next branch.
> + power-supply = <&tps65090_fet1>;
> pinctrl-0 = <&pwm0_out>;
> pinctrl-names = "default";
> };
> @@ -98,6 +100,12 @@
> regulator-boot-on;
> regulator-always-on;
> };
> +
> + panel: panel-simple {
Nit: panel-simple seems backwards in English language, and given that
simple-panel would be referring to the implementation, I used just
"panel" for Spring.
> + compatible = "auo,b133htn01";
FWIW this depends on auo,b133htn01 getting added to Documentation and
panel-simple, which I think hasn't happened yet?
https://patchwork.kernel.org/patch/4625321/
> + power-supply = <&tps65090_fet6>;
> + backlight = <&backlight>;
> + };
> };
>
> &dp {
> @@ -111,22 +119,7 @@
> samsung,link-rate = <0x0a>;
> samsung,lane-count = <2>;
> samsung,hpd-gpio = <&gpx2 6 0>;
> -
> - display-timings {
> - native-mode = <&timing1>;
> -
> - timing1: timing@1 {
> - clock-frequency = <150660000>;
> - hactive = <1920>;
> - vactive = <1080>;
> - hfront-porch = <60>;
> - hback-porch = <172>;
> - hsync-len = <80>;
> - vback-porch = <25>;
> - vfront-porch = <10>;
> - vsync-len = <10>;
> - };
> - };
> + panel = <&panel>;
> };
>
> &fimd {
Regards,
Andreas
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
next prev parent reply other threads:[~2014-08-01 16:54 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-01 16:24 [PATCH V2] ARM: dts: Add DT changes for display on peach_pi Ajay Kumar
2014-08-01 16:30 ` Ajay kumar
2014-08-01 16:54 ` Andreas Färber [this message]
2014-08-04 8:52 ` Ajay kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53DBC641.3090601@suse.de \
--to=afaerber@suse.de \
--cc=ajaykumar.rs@samsung.com \
--cc=ajaynumb@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=inki.dae@samsung.com \
--cc=jg1.han@samsung.com \
--cc=joshi@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=prashanth.g@samsung.com \
--cc=seanpaul@google.com \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).