[PATCH 1/5] ARM: dts: exynos5410: Clean up SMDK5410 indentation

[PATCH 1/5] ARM: dts: exynos5410: Clean up SMDK5410 indentation

[Andreas Färber]

The UART status properties are indented one level too deep, and we want
to derive a device tree for the ODROID-XU. Fix this before it propagates.

Signed-off-by: Andreas Färber <afaerber@suse.de>
---
 arch/arm/boot/dts/exynos5410-smdk5410.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
index 7275bbd6fc4b..4c495de1bf68 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -70,13 +70,13 @@
 };
 
 &uart0 {
-		status = "okay";
+	status = "okay";
 };
 
 &uart1 {
-		status = "okay";
+	status = "okay";
 };
 
 &uart2 {
-		status = "okay";
+	status = "okay";
 };
-- 
1.9.3


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/5] ARM: dts: exynos5410: Prepare ODROID-XU device tree

[Andreas Färber]

Derived from exynos5410-smdk5410.dts.

Signed-off-by: Andreas Färber <afaerber-l3A5Bk7waGM@public.gmane.org>
---
 arch/arm/boot/dts/Makefile                |  1 +
 arch/arm/boot/dts/exynos5410-odroidxu.dts | 86 +++++++++++++++++++++++++++++++
 2 files changed, 87 insertions(+)
 create mode 100644 arch/arm/boot/dts/exynos5410-odroidxu.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 80a781f76e88..13fb64eeee10 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -77,6 +77,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos5250-smdk5250.dtb \
 	exynos5250-snow.dtb \
 	exynos5260-xyref5260.dtb \
+	exynos5410-odroidxu.dtb \
 	exynos5410-smdk5410.dtb \
 	exynos5420-arndale-octa.dtb \
 	exynos5420-peach-pit.dtb \
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
new file mode 100644
index 000000000000..b67112bf062a
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -0,0 +1,86 @@
+/*
+ * Hardkernel ODROID-XU device tree source
+ *
+ * Copyright (c) 2014 SUSE LINUX Products GmbH
+ *
+ * Based on exynos5410-smdk5410.dts:
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos5410.dtsi"
+/ {
+	model = "ODROID-XU based on EXYNOS5410";
+	compatible = "hardkernel,odroid-xu", "samsung,exynos5410", "samsung,exynos5";
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC2,115200";
+	};
+
+	fin_pll: xxti {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "fin_pll";
+		#clock-cells = <0>;
+	};
+
+	firmware@02037000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x02037000 0x1000>;
+	};
+
+};
+
+&mmc_0 {
+	status = "okay";
+	num-slots = <1>;
+	supports-highspeed;
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+	};
+};
+
+&mmc_2 {
+	status = "okay";
+	num-slots = <1>;
+	supports-highspeed;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		disable-wp;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
-- 
1.9.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[RFC 3/5] pinctrl: exynos: add exynos5410 SoC specific data

[Andreas Färber]

From: Hakjoo Kim <ruppi.kim@hardkernel.com>

Add Samsung EXYNOS5410 SoC specific data to enable pinctrl
support for all platforms based on EXYNOS5410.

Cc: Hakjoo Kim <ruppi.kim@hardkernel.com>
[AF: Rebased onto Exynos5260]
---
 .../bindings/pinctrl/samsung-pinctrl.txt           |   1 +
 drivers/pinctrl/pinctrl-exynos.c                   | 126 +++++++++++++++++++++
 drivers/pinctrl/pinctrl-samsung.c                  |   2 +
 drivers/pinctrl/pinctrl-samsung.h                  |   1 +
 4 files changed, 130 insertions(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
index 2b32783ba821..1b2ec5a1f1a8 100644
--- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
@@ -17,6 +17,7 @@ Required Properties:
   - "samsung,exynos4x12-pinctrl": for Exynos4x12 compatible pin-controller.
   - "samsung,exynos5250-pinctrl": for Exynos5250 compatible pin-controller.
   - "samsung,exynos5260-pinctrl": for Exynos5260 compatible pin-controller.
+  - "samsung,exynos5410-pinctrl": for Exynos5410 compatible pin-controller.
   - "samsung,exynos5420-pinctrl": for Exynos5420 compatible pin-controller.
 
 - reg: Base address of the pin controller hardware module and length of
diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c
index 9609c23834ce..1ea15d98cea2 100644
--- a/drivers/pinctrl/pinctrl-exynos.c
+++ b/drivers/pinctrl/pinctrl-exynos.c
@@ -1191,6 +1191,132 @@ struct samsung_pin_ctrl exynos5260_pin_ctrl[] = {
 	},
 };
 
+/* pin banks of exynos5410 pin-controller 0 */
+static struct samsung_pin_bank exynos5410_pin_banks0[] = {
+	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
+	EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04),
+	EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpa2", 0x08),
+	EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpb0", 0x0c),
+	EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpb1", 0x10),
+	EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpb2", 0x14),
+	EXYNOS_PIN_BANK_EINTG(4, 0x0C0, "gpb3", 0x18),
+	EXYNOS_PIN_BANK_EINTG(7, 0x0E0, "gpc0", 0x1c),
+	EXYNOS_PIN_BANK_EINTG(4, 0x100, "gpc3", 0x20),
+	EXYNOS_PIN_BANK_EINTG(7, 0x120, "gpc1", 0x24),
+	EXYNOS_PIN_BANK_EINTG(7, 0x140, "gpc2", 0x28),
+	EXYNOS_PIN_BANK_EINTN(2, 0x160, "gpm5"),
+	EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpd1", 0x2c),
+	EXYNOS_PIN_BANK_EINTG(8, 0x1A0, "gpe0", 0x30),
+	EXYNOS_PIN_BANK_EINTG(2, 0x1C0, "gpe1", 0x34),
+	EXYNOS_PIN_BANK_EINTG(6, 0x1E0, "gpf0", 0x38),
+	EXYNOS_PIN_BANK_EINTG(8, 0x200, "gpf1", 0x3c),
+	EXYNOS_PIN_BANK_EINTG(8, 0x220, "gpg0", 0x40),
+	EXYNOS_PIN_BANK_EINTG(8, 0x240, "gpg1", 0x44),
+	EXYNOS_PIN_BANK_EINTG(2, 0x260, "gpg2", 0x48),
+	EXYNOS_PIN_BANK_EINTG(4, 0x280, "gph0", 0x4c),
+	EXYNOS_PIN_BANK_EINTG(8, 0x2A0, "gph1", 0x50),
+	EXYNOS_PIN_BANK_EINTN(8, 0x2C0, "gpm7"),
+	EXYNOS_PIN_BANK_EINTN(6, 0x2E0, "gpy0"),
+	EXYNOS_PIN_BANK_EINTN(4, 0x300, "gpy1"),
+	EXYNOS_PIN_BANK_EINTN(6, 0x320, "gpy2"),
+	EXYNOS_PIN_BANK_EINTN(8, 0x340, "gpy3"),
+	EXYNOS_PIN_BANK_EINTN(8, 0x360, "gpy4"),
+	EXYNOS_PIN_BANK_EINTN(8, 0x380, "gpy5"),
+	EXYNOS_PIN_BANK_EINTN(8, 0x3A0, "gpy6"),
+	EXYNOS_PIN_BANK_EINTN(8, 0x3C0, "gpy7"),
+	EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00),
+	EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04),
+	EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08),
+	EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c),
+};
+
+/* pin banks of exynos5410 pin-controller 1 */
+static struct samsung_pin_bank exynos5410_pin_banks1[] = {
+	EXYNOS_PIN_BANK_EINTG(5, 0x000, "gpj0", 0x00),
+	EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpj1", 0x04),
+	EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpj2", 0x08),
+	EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpj3", 0x0c),
+	EXYNOS_PIN_BANK_EINTG(2, 0x080, "gpj4", 0x10),
+	EXYNOS_PIN_BANK_EINTG(8, 0x0A0, "gpk0", 0x14),
+	EXYNOS_PIN_BANK_EINTG(8, 0x0C0, "gpk1", 0x18),
+	EXYNOS_PIN_BANK_EINTG(8, 0x0E0, "gpk2", 0x1c),
+	EXYNOS_PIN_BANK_EINTG(7, 0x100, "gpk3", 0x20),
+};
+
+/* pin banks of exynos5410 pin-controller 2 */
+static struct samsung_pin_bank exynos5410_pin_banks2[] = {
+	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpv0", 0x00),
+	EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpv1", 0x04),
+	EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpv2", 0x08),
+	EXYNOS_PIN_BANK_EINTG(8, 0x080, "gpv3", 0x0c),
+	EXYNOS_PIN_BANK_EINTG(2, 0x0C0, "gpv4", 0x10),
+};
+
+/* pin banks of exynos5410 pin-controller 3 */
+static struct samsung_pin_bank exynos5410_pin_banks3[] = {
+	EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz", 0x00),
+};
+
+/*
+ * Samsung pinctrl driver data for Exynos5410 SoC. Exynos5410 SoC includes
+ * four gpio/pin-mux/pinconfig controllers.
+ */
+struct samsung_pin_ctrl exynos5410_pin_ctrl[] = {
+	{
+		/* pin-controller instance 0 data */
+		.pin_banks	= exynos5410_pin_banks0,
+		.nr_banks	= ARRAY_SIZE(exynos5410_pin_banks0),
+		.geint_con	= EXYNOS_GPIO_ECON_OFFSET,
+		.geint_mask	= EXYNOS_GPIO_EMASK_OFFSET,
+		.geint_pend	= EXYNOS_GPIO_EPEND_OFFSET,
+		.weint_con	= EXYNOS_WKUP_ECON_OFFSET,
+		.weint_mask	= EXYNOS_WKUP_EMASK_OFFSET,
+		.weint_pend	= EXYNOS_WKUP_EPEND_OFFSET,
+		.svc		= EXYNOS_SVC_OFFSET,
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.eint_wkup_init = exynos_eint_wkup_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+		.label		= "exynos5410-gpio-ctrl0",
+	}, {
+		/* pin-controller instance 1 data */
+		.pin_banks	= exynos5410_pin_banks1,
+		.nr_banks	= ARRAY_SIZE(exynos5410_pin_banks1),
+		.geint_con	= EXYNOS_GPIO_ECON_OFFSET,
+		.geint_mask	= EXYNOS_GPIO_EMASK_OFFSET,
+		.geint_pend	= EXYNOS_GPIO_EPEND_OFFSET,
+		.svc		= EXYNOS_SVC_OFFSET,
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+		.label		= "exynos5410-gpio-ctrl1",
+	}, {
+		/* pin-controller instance 2 data */
+		.pin_banks	= exynos5410_pin_banks2,
+		.nr_banks	= ARRAY_SIZE(exynos5410_pin_banks2),
+		.geint_con	= EXYNOS_GPIO_ECON_OFFSET,
+		.geint_mask	= EXYNOS_GPIO_EMASK_OFFSET,
+		.geint_pend	= EXYNOS_GPIO_EPEND_OFFSET,
+		.svc		= EXYNOS_SVC_OFFSET,
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+		.label		= "exynos5410-gpio-ctrl2",
+	}, {
+		/* pin-controller instance 3 data */
+		.pin_banks	= exynos5410_pin_banks3,
+		.nr_banks	= ARRAY_SIZE(exynos5410_pin_banks3),
+		.geint_con	= EXYNOS_GPIO_ECON_OFFSET,
+		.geint_mask	= EXYNOS_GPIO_EMASK_OFFSET,
+		.geint_pend	= EXYNOS_GPIO_EPEND_OFFSET,
+		.svc		= EXYNOS_SVC_OFFSET,
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.suspend	= exynos_pinctrl_suspend,
+		.resume		= exynos_pinctrl_resume,
+		.label		= "exynos5410-gpio-ctrl3",
+	},
+};
+
 /* pin banks of exynos5420 pin-controller 0 */
 static struct samsung_pin_bank exynos5420_pin_banks0[] = {
 	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpy7", 0x00),
diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c
index 3e61d0f8f146..b4beabc19813 100644
--- a/drivers/pinctrl/pinctrl-samsung.c
+++ b/drivers/pinctrl/pinctrl-samsung.c
@@ -1124,6 +1124,8 @@ static const struct of_device_id samsung_pinctrl_dt_match[] = {
 		.data = (void *)exynos5250_pin_ctrl },
 	{ .compatible = "samsung,exynos5260-pinctrl",
 		.data = (void *)exynos5260_pin_ctrl },
+	{ .compatible = "samsung,exynos5410-pinctrl",
+		.data = (void *)exynos5410_pin_ctrl },
 	{ .compatible = "samsung,exynos5420-pinctrl",
 		.data = (void *)exynos5420_pin_ctrl },
 	{ .compatible = "samsung,s5pv210-pinctrl",
diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h
index b3e41fa5798b..1eb9a2d5e558 100644
--- a/drivers/pinctrl/pinctrl-samsung.h
+++ b/drivers/pinctrl/pinctrl-samsung.h
@@ -256,6 +256,7 @@ extern struct samsung_pin_ctrl exynos4210_pin_ctrl[];
 extern struct samsung_pin_ctrl exynos4x12_pin_ctrl[];
 extern struct samsung_pin_ctrl exynos5250_pin_ctrl[];
 extern struct samsung_pin_ctrl exynos5260_pin_ctrl[];
+extern struct samsung_pin_ctrl exynos5410_pin_ctrl[];
 extern struct samsung_pin_ctrl exynos5420_pin_ctrl[];
 extern struct samsung_pin_ctrl s3c64xx_pin_ctrl[];
 extern struct samsung_pin_ctrl s3c2412_pin_ctrl[];
-- 
1.9.3

[RFC 4/5] ARM: dts: add pinctrl support to Exynos5410

[Andreas Färber]

From: Hakjoo Kim <ruppi.kim@hardkernel.com>

Add the required pin configuration support to Exynos5410 using pinctrl
interface.

Cc: Hakjoo Kim <ruppi.kim@hardkernel.com>
[AF: Rebased]
---
 arch/arm/boot/dts/exynos5410-pinctrl.dtsi | 408 ++++++++++++++++++++++++++++++
 arch/arm/boot/dts/exynos5410.dtsi         |  32 +++
 2 files changed, 440 insertions(+)
 create mode 100644 arch/arm/boot/dts/exynos5410-pinctrl.dtsi

diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
new file mode 100644
index 000000000000..8b5288367a00
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
@@ -0,0 +1,408 @@
+/*
+ * Exynos5410 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2013 Hardkernel Co., Ltd.
+ *              http://www.hardkernel.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	pinctrl@13400000 {
+		gpa0: gpa0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpa1: gpa1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpa2: gpa2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb0: gpb0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb1: gpb1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb2: gpb2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb3: gpb3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc0: gpc0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc3: gpc3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc1: gpc1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc2: gpc2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpm5: gpm5 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpd1: gpd1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe0: gpe0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpe1: gpe1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf0: gpf0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf1: gpf1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpg0: gpg0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpg1: gpg1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpg2: gpg2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gph0: gph0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gph1: gph1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpm7: gpm7 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy0: gpy0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy1: gpy1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy2: gpy2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy3: gpy3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy4: gpy4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy5: gpy5 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy6: gpy6 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy7: gpy7 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpx0: gpx0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&combiner>;
+			#interrupt-cells = <2>;
+			interrupts = <23 0>,
+			             <24 0>,
+			             <25 0>,
+			             <25 1>,
+			             <26 0>,
+			             <26 1>,
+			             <27 0>,
+			             <27 1>;
+		};
+
+		gpx1: gpx1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&combiner>;
+			#interrupt-cells = <2>;
+			interrupts = <28 0>,
+			             <28 1>,
+			             <29 0>,
+			             <29 1>,
+			             <30 0>,
+			             <30 1>,
+			             <31 0>,
+			             <31 1>;
+		};
+
+		gpx2: gpx2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpx3: gpx3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pinctrl@14000000 {
+		gpj0: gpj0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpj1: gpj1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpj2: gpj2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpj3: gpj3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpj4: gpj4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk0: gpk0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk1: gpk1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk2: gpk2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk3: gpk3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pinctrl@10d10000 {
+		gpv0: gpv0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpv1: gpv1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpv2: gpv2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpv3: gpv3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpv4: gpv4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pinctrl@03860000 {
+		gpz: gpz {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 790d4886d7b5..6e3ec9399362 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -14,12 +14,20 @@
  */
 
 #include "skeleton.dtsi"
+#include "exynos5410-pinctrl.dtsi"
 #include <dt-bindings/clock/exynos5410.h>
 
 / {
 	compatible = "samsung,exynos5410", "samsung,exynos5";
 	interrupt-parent = <&gic>;
 
+	aliases {
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+		pinctrl3 = &pinctrl_3;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -212,4 +220,28 @@
 			status = "disabled";
 		};
 	};
+
+	pinctrl_0: pinctrl@13400000 {
+		compatible = "samsung,exynos5410-pinctrl";
+		reg = <0x13400000 0x1000>;
+		interrupts = <0 45 0>;
+	};
+
+	pinctrl_1: pinctrl@14000000 {
+		compatible = "samsung,exynos5410-pinctrl";
+		reg = <0x14000000 0x1000>;
+		interrupts = <0 46 0>;
+	};
+
+	pinctrl_2: pinctrl@10d10000 {
+		compatible = "samsung,exynos5410-pinctrl";
+		reg = <0x10d10000 0x1000>;
+		interrupts = <0 50 0>;
+	};
+
+	pinctrl_3: pinctrl@03860000 {
+		compatible = "samsung,exynos5410-pinctrl";
+		reg = <0x03860000 0x1000>;
+		interrupts = <0 47 0>;
+	};
 };
-- 
1.9.3

[RFC 5/5] ARM: dts: exynos5410: Add ODROID-XU LEDs

[Andreas Färber]

Signed-off-by: Andreas Färber <afaerber@suse.de>
---
 arch/arm/boot/dts/exynos5410-odroidxu.dts | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
index b67112bf062a..f6e7555feeff 100644
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -15,6 +15,7 @@
 
 /dts-v1/;
 #include "exynos5410.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 / {
 	model = "ODROID-XU based on EXYNOS5410";
 	compatible = "hardkernel,odroid-xu", "samsung,exynos5410", "samsung,exynos5";
@@ -39,6 +40,30 @@
 		reg = <0x02037000 0x1000>;
 	};
 
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "blue:heartbeat";
+			gpios = <&gpb2 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		green {
+			label = "green:activity";
+			gpios = <&gpb2 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+
+		red {
+			label = "red:activity";
+			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc1";
+		};
+	};
 };
 
 &mmc_0 {
-- 
1.9.3

Re: [RFC 3/5] pinctrl: exynos: add exynos5410 SoC specific data

[Linus Walleij]

On Mon, Jul 28, 2014 at 2:18 PM, Andreas Färber <afaerber-l3A5Bk7waGM@public.gmane.org> wrote:

> From: Hakjoo Kim <ruppi.kim-vC+yAUbXFBlQ0OI7PeSoCw@public.gmane.org>
>
> Add Samsung EXYNOS5410 SoC specific data to enable pinctrl
> support for all platforms based on EXYNOS5410.
>
> Cc: Hakjoo Kim <ruppi.kim-vC+yAUbXFBlQ0OI7PeSoCw@public.gmane.org>
> [AF: Rebased onto Exynos5260]

I'm waiting for Tomasz to review this before applying.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [RFC 3/5] pinctrl: exynos: add exynos5410 SoC specific data

[Tomasz Figa]

Linus, Andreas,

On 08.08.2014 14:55, Linus Walleij wrote:
> On Mon, Jul 28, 2014 at 2:18 PM, Andreas Färber <afaerber@suse.de> wrote:
> 
>> From: Hakjoo Kim <ruppi.kim@hardkernel.com>
>>
>> Add Samsung EXYNOS5410 SoC specific data to enable pinctrl
>> support for all platforms based on EXYNOS5410.
>>
>> Cc: Hakjoo Kim <ruppi.kim@hardkernel.com>
>> [AF: Rebased onto Exynos5260]
> 
> I'm waiting for Tomasz to review this before applying.

Thanks for the reminder. I'm currently on holidays and I'm not following
the lists too closely, so sorry if I happen to miss some patches.

In general the changes look good, although I can't verify whether the
data being added really match the hardware, as I don't have access to
detailed information about Exynos5410. Also I believe this patch needs
to be rebased onto current pinctrl tree as several (conflicting)
improvements to the pinctrl-samsung driver hit it before this patch was
posted.

Best regards,
Tomasz

Re: [RFC 4/5] ARM: dts: add pinctrl support to Exynos5410

[Tomasz Figa]

Hi,

Please see my comment inline.

On 28.07.2014 14:18, Andreas Färber wrote:
> From: Hakjoo Kim <ruppi.kim@hardkernel.com>
> 
> Add the required pin configuration support to Exynos5410 using pinctrl
> interface.

[snip]

> +	pinctrl_0: pinctrl@13400000 {
> +		compatible = "samsung,exynos5410-pinctrl";
> +		reg = <0x13400000 0x1000>;
> +		interrupts = <0 45 0>;

I believe you are missing the wake-up IRQ controller node here, which is
needed to handle the interrupts of EINTW (gpxN) banks.

Best regards,
Tomasz