From mboxrd@z Thu Jan 1 00:00:00 1970 From: Srinivas Kandagatla Subject: Re: [PATCH 0/2] dmaengine: qcom_bam_dma: Add support for v1.3.0 Date: Mon, 18 Aug 2014 07:23:35 +0100 Message-ID: <53F19BE7.6070300@linaro.org> References: <1397684719-30065-1-git-send-email-agross@codeaurora.org> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1397684719-30065-1-git-send-email-agross@codeaurora.org> Sender: linux-kernel-owner@vger.kernel.org To: Andy Gross , Vinod Koul Cc: devicetree@vger.kernel.org, Kumar Gala , linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-arm-msm@vger.kernel.org, dmaengine@vger.kernel.org List-Id: devicetree@vger.kernel.org Hi Andy, Any plans to respin these patches with Stanimir's comments? thanks, srini On 16/04/14 22:45, Andy Gross wrote: > This set of patches adds support for the v1.3.0 version of the QCOM BAM > dmaengine driver. The older version of the BAM is present in the MSM8x64, > APQ8064, and IPQ8064 processors. > > Due to register address space changes between versions, all of the register > accesses have to be calculated using different offsets and multipliers that are > specific to that version of the IP block. > > Andy Gross (2): > dmaengine: qcom_bam_dma: Add v1.3.0 driver support > dmaengine: qcom_bam_dma: Add binding for v1.3.0 > > .../devicetree/bindings/dma/qcom_bam_dma.txt | 4 +- > drivers/dma/qcom_bam_dma.c | 177 +++++++++++++------- > 2 files changed, 117 insertions(+), 64 deletions(-) >